Müller-Mitteltal 11,9 To. Tand-Tiefl. / Einschubrampen Verzinkt kúpiť použité (27 438)

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL Godpfxsxf Skps Angsbn * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye Gbjdpsxf Skvofx Angon ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 900 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14,4 Plateau: ----Brzdy: * EBS (elektronický brzdový systém) * Núdzové odblokovanie pre pružinové brzdové valce * Bubnové brzdy ----Nápravy: * 2 x 5,5 t BPW nápravy ----Zavesenie: * Vzduchové odpruženie s možnosťou zdvíhania a znižovania ----Ťažné zariadenie / Prírubové ťažné oko: * Výškovo nastaviteľné ťažné zariadenie do 300 mm * Ťažné zariadenie skrátené o cca 200 mm na cca 1 800 mm (tým pádom B-rozmer cca 8 080 mm) * Prírubové ťažné oko 40 mm ---- Elektrika / Osvetlenie: * 15-kolíková elektrická zásuvka * LED svetelná sústava 12 / 24 V * 2 prídavné LED cúvacie svetlá vzadu (spínané spätným chodom) * 1 LED maják (odnímateľný vrátane držiaka) vzadu * RDÜ (monitorovanie tlaku v pneumatikách) ----Všeobecné príslušenstvo: Gbedjy U A Elspfx Angen * Mechanicky nastaviteľné 3 m výstražné tabule vpredu a vzadu * Podperná kľuka vpredu * Vzadu vyklápacie podpery * Plastové náradie skrine cca 750 x 350 x 300 mm po oboch stranách vľavo a vpravo * Bočný nárazník * Podvozkový chránič * Plastové štvrtinové blatníky ----Ložná plocha: * 400 mm vysoká skrutkovaná predná stena * 50 mm podlaha z ihličnatého dreva * 2 páry kontajnerových zámkov (vysúvateľné na 3 m vonkajšiu šírku kontajnera) s možnosťou zaistenia, rozmer zámku zasunuté podľa ISO – DIN 15190 = 2 259 mm, vysunuté zámky = 2 819 mm (tento rozmer nie je podľa DIN) pri celkovej vonkajšej šírke 3 000 mm ----Zabezpečenie nákladu: * Dierovaný vonkajší rám ohnutý cca 45 stupňov s 2 t uväzovacou silou každých 480 mm * Možnosť inštalácie 3 t sklopných uväzovacích ôk každých 600 mm – na každej strane zabudovaných 5 x 3 t UVV-uviazacích ôk * V rohoch vpredu a vzadu po 1 x 6,3 t uväzovací bod (vpredu priamo za kontajnerovými zámkami v podlahe, vzadu v koncovej priečke) * Vo prednej stene a koncovej priečke rôzne otvory pre 1,2 t možnosti uväzovania ----Rampy: * 1 pár hliníkových zasúvacích rámp cca 3 310 x 410 mm (nosnosť 8 t / pár), vhodných pre pneumatikové a pásové vozidlá * Vzadu pod ložnou plochou v podvozku zabudovaný úložný priestor ----Lakovanie: * ---Podvozok, ťažné zariadenie, predná stena, podvozkový chránič a zadné výstuže žiarovo pozinkované--- * Nápravy, vzduchové zásobníky, predná podperná kľuka a prírubové ťažné oko lakované v čiernej farbe ----Info: * Nové vozidlo so zárukou výrobcu * Chyby a medzi-predaj vyhradené * Ilustračné fotografie ----Dodacia lehota: * Dodanie od cca 38. kalendárneho týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 8 900 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14,4 Platform: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (including holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General attachments: * Mechanically adjustable 3-metre warning sign kits front and rear * Support winch at the front * External foldable support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each on left & right sides * Lateral underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading area: * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container exterior width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute external width of 3,000 mm ----Load securing: * Perforated outer frame angled approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm - each side fitted with 5 x 3 t UVV lashing rings - * In the front and rear corners, 1 x 6.3 t lashing ring each (front directly behind the container locks in the wood floor as well as rear in the rear cross member) * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment integrated under the loading area in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, rear underrun protection, as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch, and flange towing eye painted in a black tone ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery time: Gsdpfx Aoy U A Efsngebn * Available from approx. CW 38/2026

Stav: použitý, pohotovostná hmotnosť: 3 210 kg, maximálna hmotnosť nákladu: 8 690 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2021, ďalšia kontrola (TÜV): 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R17.5, Rok výroby: 2021, Výbava: ABS, Nemecké vozidlo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trojstranný sklápací náves s podskrutkovanými rampami Rok výroby: 05/2021 pozinkovaný Celková hmotnosť: 11 900 kg Prevádzková hmotnosť: 3 210 kg Užitočné zaťaženie: 8 690 kg Rozmer pneumatík: 235/75 R 17,5 tandemová náprava menej ako 1 m Ťažné zariadenie plynulo výškovo nastaviteľné, žiarovo pozinkované, ťažné oko 40 mm Rám pozinkovaný Nápravy BPW Výška podlahy: 0,93 m Možnosť ďalších služieb! Exportné značky (červené / 30 dní) Nemecko Prevozné značky (žlté / 5 dní) Nemecko Rakúske prevozné značky je možné sprostredkovať Gbjdpeyxbgcefx Angon Dovoz vozidla (za poplatok) Údaje z internetu sú nezáväznými popismi. Nepredstavujú garantované vlastnosti. Predajca nezodpovedá za chyby, preklepy a chyby pri prenose dát. Predaj s výhradou medzipredaja. Predaj len podnikateľom. Platné sú výhradne naše VOP.

Stav: použitý, pohotovostná hmotnosť: 3 210 kg, maximálna hmotnosť nákladu: 8 690 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2021, ďalšia kontrola (TÜV): 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R17.5, Rok výroby: 2021, Výbava: ABS, Nemecké vozidlo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trojstranný sklápací náves s podskrutkovanými rampami Rok výroby: 05/2021 pozinkovaný Celková hmotnosť: 11 900 kg Prevádzková hmotnosť: 3 210 kg Gedpfjyw N Npex Angobn Užitočné zaťaženie: 8 690 kg Rozmer pneumatík: 235/75 R 17,5 tandemová náprava menej ako 1 m Ťažné zariadenie plynulo výškovo nastaviteľné, žiarovo pozinkované, ťažné oko 40 mm Rám pozinkovaný Nápravy BPW Výška podlahy: 0,93 m Možnosť ďalších služieb! Exportné značky (červené / 30 dní) Nemecko Prevozné značky (žlté / 5 dní) Nemecko Rakúske prevozné značky je možné sprostredkovať Dovoz vozidla (za poplatok) Údaje z internetu sú nezáväznými popismi. Nepredstavujú garantované vlastnosti. Predajca nezodpovedá za chyby, preklepy a chyby pri prenose dát. Predaj s výhradou medzipredaja. Predaj len podnikateľom. Platné sú výhradne naše VOP.

Stav: nový, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 2 140 kg, maximálna hmotnosť nákladu: 12 260 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, zavesenie: oceľ, veľkosť pneumatiky: 285/ 70 R 19,5, rázvor náprav: 1 140 mm, brzda prívesu: príves s brzdou, Rok výroby: 2026, - TM-TA 14.4: - incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box, both sides with lugs and quick-shorteners in Y-special version, 6.3 t - Clamping force with load-securing certificate - Wabco EBS - TPMS (Tire Pressure Monitoring System) - Emergency release device for spring-loaded brake cylinders Gedpoxuhy Eefx Angjbn - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with compensating unit - Jost landing gear front - 2 x external drop-down supports at the rear - Height-adjustable, +/- 150 mm, hot-dip galvanized drawbar - Hot-dip galvanized chassis - 15-pin power connector - LED tail lights - Closed single plastic mudguards - Foldable A-panel at the rear - Plastic collision protection buffer on underride guard - Hot-dip galvanized underride guard with integrated chain storage box B= 370 mm x D= 420 mm x H= 480 mm at the front left & right - 2 repositionable skip stops for lateral centering of containers - Front skip stops can be inserted into four positions with a pivoting stop - Each side fitted with 2 x 5.3 t UVV lashing rings for attaching tie-down elements - Axles, springs, air tanks, and landing gear painted in black tone - Subject to errors and prior sale - New vehicle with manufacturer’s warranty - Available from calendar week 05 / 2026

Stav: nový, Funkcionalita: plne funkčný, pohotovostná hmotnosť: 2 140 kg, maximálna hmotnosť nákladu: 12 260 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 285/ 70 R 19,5, rázvor náprav: 1 140 mm, Rok výroby: 2026, - TM-TA 14.4: - Wabco EBS (elektronisches Bremssystem) - RDÜ Reifenkontrollsystem (Reifendrucküberwachungssystem) - Notlöseeinrichtung für Federspeicherzylinder (Notlösemechanismus für die Federspeicherzylinder) - Trommelbremsen - 2 x 7 t Gigant-Achsen - Parabelfedern mit Ausgleichsaggregat - Jost-Stützwinde vorne, 2 außenliegende Fallstützen hinten - Höhenverstellbares, feuerverzinktes Zugrohr (+/- 150 mm) Gsdpfx Aexu Hplengjbn - Feuerverzinktes Fahrgestell - 15-poliger Stromstecker - LED-Schlussleuchten - Geschlossene Einzelkotflügel aus Kunststoff - Klappbares A-Schild hinten - Kunststoff-Rammschutzpuffer am Unterfahrschutz - Feuerverzinkter Anfahrschutz mit integriertem Kettenablagekasten (B=370 mm x T=420 mm x H=480 mm) vorne links und rechts - Zwei steckbare Muldenanschläge zur seitlichen Zentrierung der Mulden - Vordere Muldenanschläge mit pendelbarem Anschlag, in 4 Positionen steckbar - Seitlich jeweils 2 Zurringe (UVV geprüft) à 5,3 t zum Einhängen von Spannelementen - Achsen, Federn, Luftkessel und Stützwinde in Schwarz lackiert - Änderungen, Irrtümer und Zwischenverkauf vorbehalten - Neufahrzeug mit Herstellergarantie - Lieferbar ab KW 05/2026

Stav: použitý, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 10/2016, Výbava: ABS, Vitajte v spoločnosti Johanning's Nutzfahrzeuge, vašom špecialistovi na mladé a exkluzívne jazdené vozidlá. Okamžite k dispozícii! Doručenie možné. Cena na vyžiadanie! Financovanie a leasing na splátky možné na vyžiadanie. Lokalita: 39606 Osterburg Značka: Mueller Mitteltal Typ: TA-2 / ETUE-TA-R 11,9 Rok výroby: 2016 Prevádzková hmotnosť: 3 250 kg STK platná do: marec 2026 Bezpečnostná kontrola: september 2026 Šírka: 2,47 m Dĺžka: 6,20 m Výška: 90 cm Pre ďalšie fotografie alebo videá nás neváhajte kontaktovať. Johanning's Nutzfahrzeuge, váš partner pre exkluzívne a mladé jazdené vozidlá. Naše služby – vaše výhody (po predaji) - Výkup vášho vozidla možný (v akomkoľvek stave) - Okamžité bezplatné odhlásenie vášho vozidla - Povolenie na evidenciu vozidla za 150 € (vrátane poplatkov a značiek) - Dočasná značka – - Obhliadka a skúšobná jazda možná kedykoľvek po telefonickom dohovore Gbodpfx Aoycpd Ajngon - Doručenie na adresu možné po dohode Zmeny a medzipredaj vyhradené.

Stav: použitý, pohotovostná hmotnosť: 2 980 kg, maximálna hmotnosť nákladu: 8 920 kg, celková hmotnosť: 11 900 kg, prvá registrácia: 01/2016, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 550 mm, veľkosť pneumatiky: 235/75 R 17,5, rázvor náprav: 990 mm, farba: strieborný, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: na ceste / v prevoze, 2 nápravy, BPW nápravy, tandem, vzduchové odpruženie, ABS (protišmykový systém), upínacie oká, nájazdové rampy prípadne nainštalovateľné, mechanické rampy, zadná podpera, výškovo nastaviteľné oje. Rázvor: 990 mm. Nadstavba: tandemová plošina, pozinkovaný rám, nájazdové rampy za príplatok 1.000 EUR, momentálne 10,9 tony. Údaje sú orientačné, keďže je vozidlo v preprave! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, predaj počas inzerátu a omyly vyhradené! Gbodpfoy Tpw Eex Angon

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, ETÜ-TA-R 14,4 ----Brzda: * EBS – elektronický brzdový systém * Nouzové odjištění pružinových brzdových válců * Bubnové brzdy ----Nápravy: * 2 × 7 t nápravy Gigant ----Odpružení: * Vzduchové odpružení ----Tažná oj / přípojný čep: * Tažná oj výškově stavitelná v rozsahu 300 mm * Prodloužení oje o 250 mm na celkovou délku 2 250 mm * 40mm přípojný čep s přírubou ----Osvětlení / elektroinstalace: * RDÜ (monitoring tlaku v pneumatikách) * LED koncová světla 12 / 24 V * 15pinová elektrická zásuvka ----Obecná přídavná výbava: * Opěrná noha Jost vpředu * Vnější žárově zinkované sklopné podpěry vzadu * Plastová skříň na nářadí vpředu vpravo zvenčí na přední stěně * Boční ochrana proti najetí * Plastové čtvrt-blatníky ----Plošina plošinového přívěsu: * 50mm podlaha z jehličnatého dřeva * Příprava před čelní stěnou pro dodatečnou montáž kontejnerových uzávěrů * Šroubovaná čelní stěna z hladkého plechu * Boční stěny ze stěnového ocelového plechu – trapézový profil – sklopné s pružinovým mechanismem * Zadní stěna z oceli, zasouvací mezi rampové držáky a při nepoužívání uložitelná uvnitř před čelem * Zadní sloupky šroubované * Nájezdová hrana vzadu cca 860 mm ----Zajištění nákladu: * Perforovaný vnější rám ohnutý cca 45° s vázací silou 2 t každých 480 mm * Možnost instalace sklopných vázacích třmenů s vázací silou 3 t každých 600 mm * V předních a zadních rozích vždy 1× vázací oko s nosností 6,3 t * V čelní a koncové příčce různé otvory pro vázání 1,2 t ----RAMPY: * Jednodílné mechanické nájezdové rampy z roštového materiálu s pružinovým mechanismem pro obsluhu jednou osobou cca 2 750 × 600 mm (stlačitelné na šířku 20 mm) ----Nátěr: * Podvozek, tažná oj, čelní stěna, zadní stěna, zadní část i nájezdové rampy žárově zinkované * Barva bočních stěn v odstínu RAL 9010 čistě bílá * Nástřik bočních stěn v jiném odstínu RAL možný za příplatek ----Informace: Gbedpfxeq Dyvye Angon * – Zesílená a certifikovaná nástavba dle EN 12642 XL včetně certifikátu zajištění nákladu – * Nové vozidlo s garancí výrobce * Změny a předchozí prodej vyhrazeny ----Dodací lhůta: * K dispozici ihned, odběr v Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, ETÜ-TA-R 14.4 ----Brzda: * EBS – elektronický brzdový systém * Nouzové uvolňovací zařízení pro pružinové válce * Bubnové brzdy ----Nápravy: * 2 x 7 t nápravy Gigant ----Odpružení: * Vzduchové odpružení ----Tažná oj / tažné oko s přírubou: * výškově stavitelná tažná oj (nastavitelná o 300 mm) * prodloužení oje o 250 mm na celkovou délku 2 250 mm * 40mm tažné oko s přírubou ----Osvětlení / Elektrická výbava: * RDÜ (monitorování tlaku v pneumatikách) * LED koncová světla 12 / 24 V * 15-pólová elektrická zástrčka ----Obecné přídavné prvky: * Podpěrná noha Jost vpředu * Vnější žárově zinkované sklopné podpěry vzadu * Plastová schránka na nářadí vpravo vpředu na čele korby * Boční nárazová ochrana * Plastové čtvrt blatníky ----Ložná plocha návěsu: Gbsdpfopk Dv Rsx Angen * 50mm podlaha ze smrkového masivu * Před čelní stěnou příprava na dodatečnou montáž uzávěrů kontejneru * Šroubovaná přední stěna z hladkého plechu * Sklopné bočnice z trapézového ocelového plechu s pomocnými pružinami * Zadní stěna z ocelového plechu zasouvatelná mezi držáky nájezdových ramp, při nepoužívání uložená vnitřně před čelní stěnou * Zadní sloupky šroubované * Zadní nájezd cca 860 mm ----Zajištění nákladu: * Děrovaný vnější rám, ohnutý cca 45°, zajišťovací síla 2 t každých 480 mm * Možnost instalace výklopných ok s nosností 3 t každých 600 mm * V každém rohu vpředu a vzadu 1x zajišťovací oko s nosností 6,3 t * V předním a zadním příčníku různé otvory pro zajišťovací možnosti s nosností 1,2 t ----RAMPY: * Jednodílné mechanické nájezdové rampy z roštového plechu s pomocnou pružinou pro ovládání jedním člověkem, rozměry cca 2 750 x 600 mm (ve shrnutém stavu až na 20 mm) ----Nátěr: * Žárově zinkovaný rám vozidla i oje, čelní stěna, zadní stěna, zadní čelo a nájezdové rampy * Boční stěny standardně v barvě RAL 9010 (čistě bílá) * Na přání lakování bočnic do jiné barvy RAL za příplatek ----Informace: * --Zesílená a certifikovaná konstrukce dle EN 12642 XL včetně certifikátu o zajištění nákladu-- * Nové vozidlo s plnou zárukou výrobce * Chyby a mezitímní prodej vyhrazeny ----Doba dodání: * K okamžitému odběru v Egestorfu

Stav: použitý, maximálna hmotnosť nákladu: 12 080 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, Rok výroby: 2022, Výbava: ABS, * ETM-TA 14.4: ----Brzdy: * Wabco ABS brzdový systém * Nouzové odjištění pružinových válců * Bubnové brzdy ----Nápravy: * 2 x 7 t nápravy Gigant Gedpfol Th Dmsx Angjbn ----Pérování: * Parabolické pružiny s tandemovým vyrovnávacím agregátem ----Tažná oj / Tažné oko: * Výškově nastavitelná tažná oj (+/- 150 mm) * 40 mm šroubovací tažné oko ----Obecné přídavné díly: * Přední opěrná noha Jost * Boční ochrana proti podjetí * Sklopný zadní A-štít ----Elektroinstalace / Osvětlení: * 15-pólová zásuvka * Vícekomorová zadní světla ----Nadstavba: * Pevné ocelové čelní a boční stěny * Odnímatelná ocelová zadní stěna * Podlaha z jehličnatého dřeva, tl. 50 mm * 1 kluzná plechová vložka 750 x 1 000 mm v přední části včetně dvou zasouvacích držáků korby vpředu (2 polohy) * Zadní příčník pro uložení hliníkových najížděcích ramp včetně dvou přídavných opěr vzadu ----Nakládací hrana: * Výška nezatížené nakládací hrany cca 710 mm ----Zajištění nákladu: * 4 přestavitelné zásuvné dorazy v 2 polohách pro boční centrování korby * Bočně vždy 1x (13,5 t) UVV uchycení pro zavěšení napínacích prvků * 2 ráčnové napínače (seřizování vřetenem) s kompenzačním řetězem a rychlozkracovačem (napínací síla 6 300 kg) ----Pneumatiky: * Pneumatiky: 285/70R19.5 ----Rozvor: * Rozvor: 1 140 mm ----Lakování: * Podvozek, čelní stěna, boční stěny, blatníky, tažná oj a zadní opěry žárově zinkované * Nápravy, pružiny, opěrná noha a vzdušníky lakované v černé barvě ----Obecné informace: * Vozidlo má denní registraci 06/2024, kvůli chybějícímu systému monitorování tlaku v pneumatikách nebylo zatěžováno ani používáno * Změny, chyby a mezitímní prodej vyhrazeny ----Dostupnost: * K dispozici ihned z Egestorfu u dálnice A7

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x SAF axles (9 t each) * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm ride height via lift cylinder * Traction aid for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no installation required on the truck side, additional cable for operation from within the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange bolt-type towing eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via tail light ----General Equipment: * BPW landing leg, front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single mudguards * Two-step access ladder in front of the bulkhead on the left * Shovel and broom holders in front of the bulkhead * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, located at the right side * Enclosed side underrun protection, usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right) operable via remote control Gsdpfxoyfy Rre Angobn ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength, fine-grain steel * 20,000 kg traction force * Hook height 1,570 mm * Hooklift operated via remote control * Remote control features fast-lowering function (unloading only, not while loading) * Emergency stop switches on both left and right sides * Container mountings with 4 supports per side and 1 roller each at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to support main arm lifting * 2 x mechanical drop support legs at rear * Rated for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside its charging cradle, the service brake must be applied to enable radio control. Brake connections must remain connected at all times to operate the hydraulic/pneumatic valves. * Underrun protection monitoring system ensures underrun guard is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, steps, underrun protection, and drop support legs hot-dip galvanized * Axles, air tanks, and front landing leg painted black * Palfinger hooklift painted black/yellow ----Notes: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Container: Dimensions: * Loading length: 5,500 mm * Loading width: 2,300 mm * Loading height: 1,000 mm Notes: * Fittings for hook systems available

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axles: * 2 x t SAF axles * 1st axle as a lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Start assist for maneuvering and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required; includes additional cable for operation from the tractor) Gjdpjx Dp Atsfx Angjbn ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Drawbar Eye: * 50 mm flanged screw-on drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12/24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Remote power supply 12+24V via tail light circuit ----General Attachments: * BPW landing gear (front) * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Detachable pin towing eye (usable only with retracted underrun protection) * Closed plastic half-shell single mudguards * Two-step access ladder in front of front wall, left side * Shovel and broom holder in front of front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Enclosed side impact protection, usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor), rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (installed front right) with remote control operation ----Hook Lift: * Palfinger PHT 20 SCASNSLD5 telescopic hook lift (serial no. 100746129, year 2023) * Base frame made of high-strength fine grain steel * 20,000 kg pulling force * Hook height: 1,570 mm * Hooklift control via remote control * Remote control with quick function for lowering, but not for lifting * Emergency stop switches on left and right sides * Container platform with 4 lateral supports per side and 1 roller at the rear per side * Hydraulic rear lock * 2 additional hydraulic cylinders to support the main boom lifting * 2 x mechanical drop-down rear supports * Approved for 20 t GVW (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside of the charging cradle, the service brake must be applied for remote activation; brake connections must remain permanently connected to open the hydraulically/pneumatically controlled valves * Monitoring system for underrun protection to ensure it is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Stav: použitý, maximálna hmotnosť nákladu: 12 080 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, dĺžka ložného priestoru: 3 900 mm, šírka ložného priestoru: 1 920 mm, výška ložného priestoru: 415 mm, Rok výroby: 2022, Výbava: ABS, * ETM-TA 14.4: ----Braking system: * Wabco ABS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalising assembly ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General attachments: * Jost landing gear at front * Side underrun protection * Folding A-plate at rear ----Electrics / Lighting: * 15-pin electrical plug * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side panels * Removable steel rear panel * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm at the front, incl. 2 drop-in skip stops at the front in 2 positions * Rear crossmember for fitting aluminium drive-on ramps, incl. 2 additional rear supports ----Loading edge: * Unladen loading height approx. 710 mm Gbjdpfx Anol Th Eyegsn ----Load securing: * 4 repositionable skip stops (fit in 2 positions) for lateral centering of skips * Each side with 1 x (13.5 t) UVV lashing ring for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Painting: * Chassis, front panel, side panels, mudguards, drawbar, rear supports hot-dip galvanized * The axles, springs, landing gear, and air tanks painted in black ----General information: * Vehicle registered for one day 06/2024, not loaded/used due to missing tyre pressure monitoring system * Errors and prior sale reserved ----Delivery time: * Available immediately from Egestorf, A7

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Brake System: * Wabco EBS-E braking system * Emergency release device for spring-actuated cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Start-up aid for manoeuvring and forced lowering on the first axle – controlled by speed-dependent EBS electronics (no truck-side installation required, additionally with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-bolted towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary plug * LED lighting system 12/24V * 2 LED reversing lights activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connector cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via tail lights ----General Fittings: * BPW landing gear at front * Manually extendable underride guard for container lengths over 6,000 mm * Speedline diamond aluminium rims * Pin-lock tow coupling (use only with underride guard pushed in) * Enclosed plastic half-shell individual mudguards * Two-step access before the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 stainless steel toolboxes – matt – approx. 650 x 350 x 320 mm, fitted right side * Enclosed side guard usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hookloader (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg tractive force * Hook height 1,570 mm * Hookloader control via remote control * Remote control with quick function for lowering only, not for picking up * Emergency stop switches on both left and right sides * Container mountings with 4 supports each side and 1 roller at rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with main arm lifting * 2 x mechanical drop-down rear supports Gbedpfx Anox Dp Agogen * Certified for 20 t total weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the docking station, the service brake must be applied to enable wireless operation. Brake connections must remain permanently connected to allow the hydraulic/pneumatic valves to operate. * Monitoring system for underride guard ensuring it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underride guard, and mechanical supports galvanised * Axles, air tank, and front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is immediately available

Stav: použitý, maximálna hmotnosť nákladu: 14 300 kg, celková hmotnosť: 20 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2023, ďalšia kontrola (TÜV): 11/2026, Rok výroby: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axles: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) Gbedpfx Asx Dp Amongsn * Lift axle with ride height +30 mm via positioning cylinder * Traction aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable control in the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-mounted towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary connector * LED lighting system 12 / 24 V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24 V electrics * Extended connection lines for agricultural and forestry vehicles * Power supply to remote control 12+24 V via tail light ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Detachable tow pin coupling (usable only when underrun protection is retracted) * Closed plastic single-splashguard fenders * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, right side * Closed side underrun protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connectors (engine side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (installed front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg tensile force * Hook height 1,570 mm * Hooklift control via remote control * Remote control with rapid function for tipping off, but not for lifting * Emergency stop switches on both the left and right sides * Container supports with 4 rests each side plus 1 roller each at rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be activated to enable radio release. Brake couplings must remain permanently connected to operate the hydraulic/pneumatically controlled valves. * Monitoring system for underrun protection—ensures retraction during tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access step, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, and front landing leg painted in a shade of black * Palfinger hooklift painted black/yellow ----Info: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Container: Dimensions: * Cargo length: 5,500 mm * Cargo width: 2,300 mm * Cargo height: 1,000 mm Info: * Mounting brackets for hook systems according to...

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via PIN reverse gear * Additional lock for the trailing axle controlled from the tractor unit for maneuvering – without truck-side installation – assigned to PIN 10; lock must be deactivated before driving on public roads ----Suspension: * Air suspension with lift and lower system and RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * LED tail lights, 12/24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard as info tool installed with pressure sensors solely for total axle load display * 7-pin socket at the rear for overlength lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air reservoir * Mechanical crank landing gear * Galvanised steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning board package ----Low Loader Deck: * 50 mm floor covering made from larch/Douglas fir instead of spruce/fir * Rear incline – 700 mm long – at the gooseneck transition to the low-bed with checker plate covering and a perforated strip at the end for hanging aluminum loading ramps * Tread plate covering above the wheels * SP-Kombi package: Tool box with 45° corners made of galvanized steel sheet, additionally powder-coated in RAL 9006 white aluminum on the gooseneck platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the slanted corners * Folding aluminum side walls, 500 mm high, on the gooseneck platform, incl. folding and removable rear stakes * Plug-in aluminum rear panel, 150 mm high * 2nd king pin position * Preparation for container locking system * Preparation for three stowage recesses in the run-on slope from low-bed to gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding mounting sockets into the outer frame ----Load Securing: Gooseneck platform: * 50 mm holes at the front corners and front for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor at the slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings per side, recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally in front of the approach slope to the gooseneck * 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, each side, retractable and recessed in the outer frame * 4 stake pockets recessed in the outer frame on each side * Profifix lashing rail centered on the longitudinal axis (3 t lashing capacity per securing circuit) ----Excavator Boom Rest: * From the end of the last rigid axle to the rear crossmember, W= 770 mm, D= 270 mm (2 x 6.4 t lashing rings per side firmly welded in the boom rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum loading ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) Gbedpfx Aeykx I Hongjn * Hydraulic ramp shifting on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider on the semi-trailer (if the truck’s hydraulic pump output exceeds 40 l/min up to a max. 250 l/min), climbing

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML Gedpfx Anoykx I Togjbn ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional lock for the trailing axle from the driver's cab for shunting purposes — no truck-side installation required — assigned to PIN 10. The lock must be deactivated before driving on public roads. ----Suspension: * Air suspension with lifting and lowering device as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal — no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as infotool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General attachments: * Aluminium air tanks * Mechanical crank landing gears * Galvanised steel mudguards * Swivel arm as a carrier for connecting lines in front of the front plate ----Warning package: * Mechanically adjustable warning sign package ----Low-loader platform: * 50 mm flooring made from larch / Douglas fir wood instead of spruce / fir * Rear slope — 700 mm long — on the semi-trailer platform to the low deck with checker plate covering and a perforated strip at the end for attaching aluminium approach ramps * Tear plate coverings above the wheels * SP combination package: toolbox with 45° corners made of galvanised sheet steel, additionally powder-coated in RAL 9006 white aluminium, installed on the semi-trailer platform approx. 2,480 x 500 mm * Top folding lid and side doors in the slanted corners * Foldable aluminium side walls, 500 mm high, on the semi-trailer platform, including rear stanchions, foldable and removable * Plug-in aluminium rear wall, 150 mm high * 2nd kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach slope from the low deck to the gooseneck * Preparation for retrofitting folding outriggers for 3 m width extension by welding in the bearing mounts into the outer frame ----Load securing: Semi-trailer platform: * Front corners and front 50 mm drilled holes for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor beside the approach slope * Perforated and bent outer frame 45 with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t recessed lashing rings in the outer frame Low-loader platform: * 2 x 16.5 t lashing rings centrally recessed directly in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, recessed into the outer frame * Each side with 4 stake pockets, recessed in the outer frame * Profifix lashing rail centrally on the longitudinal axis (lashing option 3 t per lashing point) ----Excavator arm trough: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings in the excavator arm trough, firmly welded) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminium approach ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp movement on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider in th

Stav: použitý, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2024, celková šírka: 2 550 mm, Rok výroby: 2023, Müller Mitteltal KA-TA-R 11.9 tandem three-way tipper with numerous extras. Gross weight: 11,900 kg Payload (standard): approx. 8,750 kg Internal dimensions: 5,000 x 2,420 x 500 mm Tyres: 385/55R19.5 Four-layer paint finish, single colour Wheels: silver Chassis/side protection: hot-dip galvanized Platform body with front wall: hot-dip galvanized Axles/springs/air tanks, etc.: black Side and rear walls: RAL 2011 deep orange Reinforced and certified body according to EN 12642 XL, including load securing certificate (only in combination with 500 mm high steel sideboards). Rear stanchions bolted, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN, recessed at the front. Net hooks integrated on both sides and rear into the central lock mounts of the main sideboard, plus two additional hooks on the front wall. BPW axles instead of GIANT Tipping platform with fixed front wall in hot-dip galvanized design, with bolted, galvanized rear stanchions, without further coating (not applicable for HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially in large floor panels; complaints related to this are excluded from warranty. Tyres 385/55R19.5 instead of 235/75R17.5 (ground and coupling height + approx. 110 mm, code 08.940 ramp length of 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), position: right side of chassis frame, in direction of travel. 1 pair of aluminium loading ramps without running channels (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg each. Two-step access, in front of the front wall, left-hand side in direction of travel (hot-dip galvanized). Connecting cables extended for agricultural and forestry towing vehicles. Gbodpfxsvy Tvte Angen Further information New: No

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle equalization at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring and turnbuckle ----Lighting / Electrical: Gbodpfxjl Th I As Angjn * RDÜ tire pressure monitoring system * Multi-voltage system * LED tail lights 12 / 24 V * Removable revolving beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel mud flaps, each with splash protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for tool box on the turntable platform * 4 stake pockets on each side (stakes not included) with lashing possibilities ----Load securing (La-Si package including): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swiveling and retractable, loadable in all directions and recessed into the outer frame * 13.4 t load capacity at the corners, otherwise 10 t ----Widening: * 6 pairs of mechanically folding extension arms for a total width of 3 meters (not in the rear slope) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofit of hydraulic side ramp displacement ----Loading area: * Above turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black tone ----Info: * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * Multi-voltage system * LED tail lights 12 / 24 V * Removable rotating beacon at the rear * 15-pin power connector ----General Attachments: * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Closed plastic mudguards on front axle and straight, galvanized steel fender skirts on rear axle, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Flip-up lid (hot-dip galvanized) to the toolbox on the turntable platform * Four stake pockets on each side (stakes not included) with integrated lashing points ----Load Securing (La-Si Package consisting of): * 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV-tested lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame * In the corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for a total width of 3 m (not in the rear slope area) * Widening boards stored in the center of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofit of hydraulic side-shifting ramps ----Loading Area: * Over fifth wheel: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight Gbodpfsl Th Nnjx Angsn ----Paintwork: * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone ----Info: * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available ex works Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, celková šírka: 2 550 mm, celková výška: 970 mm, Rok výroby: 2026, Výbava: ABS, Müller-Mitteltal KA-TA-R 11.9 ML / 024 Truck Tandem Three-Way Tipper Gsdpfx Aey S Nwvengobn - Tipper body dimensions: 5,000 x 2,420 mm (internal clearance) - Side wall height: 500 mm - Floor made of fine-grained steel S 420 MC, 4 mm thick - Side walls laser-welded from high-tensile fine-grained steel, fixed front wall - 2 pairs of folding lashing rings with a lashing capacity (LC) of 5,000 daN, 1 pair each recessed front and rear in the steel floor. 4 pairs of folding lashing rings with LC 3,000 daN recessed in the steel floor. - Net hooks integrated on both sides and rear in the side wall mounts and in the front wall - Reinforced and certified body according to EN 12642 XL - 2 LED reversing spotlights at the rear of the trailer - Aluminium loading ramps without wheel groove, suitable for rubber-tyred and tracked vehicles (8 t/pair), 3,310 x 400 x 105 mm - Plastic toolbox - Aluminium air reservoir - BPW axle, with S-cam brake - Tyres: 235/75R17.5 Suitable for a coupling height of approx. 925 mm unladen +/- 150 mm Subject to prior sale and errors! Sale exclusively based on our General Terms and Conditions. Important Notice – Please Read: Despite careful checking of all details stated in our offer, errors may occur. In some cases, such errors arise from data transmission systems of various platform providers. Therefore, we point out that all details are provided without guarantee and do not constitute a legally binding claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it is information intended to initiate a contract. The information provided here is non-binding and does not represent warranted characteristics.

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * NEW VEHICLE without first registration, * Now available immediately in RAL 7016 Anthracite, Ref. for inquiries: 11653 * GVW: 11.9 t, Payload: 8.77 t * Reinforced and certified body according to EN 12642 XL including load securing certificate Gbjdpfx Aeyxbdbengsn * 6.27 m x 2.47 m x 0.4 m steel side walls, laser-welded, foldable, with 2 spring supports * Front wall bolted, made of smooth sheet (hot-dip galvanized) * Rear wall: (hot-dip galvanized), inserted in front of the ramps with empty holder behind the front wall * Rear stanchions bolted (hot-dip galvanized) * Softwood floor, 50 mm thick * 4 pcs. UVV lashing rings LC 6300 daN recessed in the front and rear cross member * 10 pcs. UVV lashing brackets LC 3000 daN recessed in the existing hole grid in the outer frame * Ramps: one-piece, with hot-dip galvanized grating in anti-slip design * Preparation in front of the front wall for subsequent installation of container locks * Plastic toolbox mounted in front of the front wall * Chassis and tow bar (hot-dip galvanized) * 235/75 R17.5 (dual tires), parabolic springs * BPW axles, with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm towing eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with integrated indicator function * 1 removable round LED beacon (warning light) including bracket and installation ---- * Trade-in possible * Financing through our partners possible with or without down payment or residual value and various terms. Request a quote from us! ---- * Leasing example from our partner FM LeasingPartner: €485/month net for 60 months with no down payment and "0" Euro residual. Other terms with or without down payment/residual value possible. Request a quote from us! We are authorized Müller-Mitteltal dealers! ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 * Outside these hours, viewings are possible by appointment. * We speak German, English, Russian, Polish, and French.