Müller Mitteltal Ka-Ta Tandemkipper- Tieflader kúpiť použité (18 477)

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (Electronic Braking System) * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tyre pressure monitoring with in-cab display via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provision in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, drop-down design, split centrally once * Steel rear wall, can be slid in between the ramps, with bracket for unused storage inside at the front bulkhead * Screw-fastened rear stanchions * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm (with 4 lashing rings mounted per side) * 1 x 6.3 t lashing ring at each front and rear corner * Profifix lashing rail along vehicle longitudinal axis, centre-mounted for securing loads up to LC 3000 daN * Multiple holes in front and rear cross-members for securing loads up to 1.2 t * One-piece mechanical grating ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (retractable to 20 mm height) Fedpfxsl Thvxj Am Sopg * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanised * Axles, springs, air tanks, flange towing eye and support winch painted in a black tone * Side wall painting available in RAL colour of choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion * -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available from approx. CW 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Front support winch * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable in mm) * 15-pin electrical connector * LED lighting Fpedpfx Amou I Iqxo Ssg * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross beams * Enclosed fenders made of sheet steel with splash guards * Closed side underrun protection usable as advertising surface * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swivelling cable drum superstructure, clear width between drum arms 1,700 mm – with tension lock for securing the drum at the support arm ends, as well as central claw locking mechanism for securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 8 800 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Manual Landing Gear (front) * Spring-assisted square tube supports at rear with base plate, securing pins for multiple support heights * Drawbar with 40 mm bolt-type towing eye (height-adjustable, mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubing with cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, usable as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm * Swivel-mounted cable drum frame, clear width between drum arms 1,700 mm, with tension lock for securing drum at arm ends and a centrally positioned claw lock to secure the cable drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive Fodpfju I Iqljx Am Sspg * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 1 pair of stepped centering cones made of polyamide * Hydraulic power unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front landing gear * Spring-assisted square tube supports at the rear with base plate, safety locking pins for variable support heights * Drawbar with 40 mm screwed towing eye (height-adjustable ___ mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross-members * Closed steel mudguards with splash protection * Closed lateral underrun protection usable as advertising space * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling cable drum mounting, usable width between drum arms: 1,700 mm; with tension lock to secure the drum ends on the supporting arms as well as a central claw lock to secure the cable drum mounting to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed controller and brake for the drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped * Hydraulic power pack with Loncin gasoline engine, including manual and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Curb weight 2,690 kg * Vehicle is hot-dip galvanized Fpodpfx Amou I Iqrs Sjg * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle Fpedpfx Aeu I Iq Eom Sog * Parabolic leaf springs * Front support winch * Spring-assisted square tube supports at the rear with base plates, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection that can be used as an advertising surface * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure; clear width between drum arms 1,700 mm; with clamp lock for drum securing at the carrier arm ends and a central claw lock securing the cable drum superstructure to the chassis * Motor hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of polyamide centering cones, stepped in stages * Hydraulic power pack with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Hot-dip galvanized finish * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS brake system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Rear square tube supports with spring assistance and base plates, safety locking pins for multiple support heights * Drawbar with 40 mm screw coupling eye (height adjustable) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubing and cross members * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivelling cable drum mount, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the ends of the support arms and a central claw lock for securing the drum mount to the chassis Fsdpfeu I Iqfsx Am Sjpg * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centring and rotating ends * 1 pair of stepwise recessed polyamide centring cones * Hydraulic pump unit with Loncin petrol engine, including manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tyres * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 900 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square tube support legs at the rear with base plates and safety locking pins for different support heights * Drawbar with 40 mm bolt-type towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed steel fenders with splash guards * Closed side underrun protection usable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with locking clamps to secure drum at the bearing arm ends and a central claw lock to secure the cable drum superstructure to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive Fpedpfxoxyniwo Am Sjg * Steel drum shaft with 76 mm diameter with centering and rotatable ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic supply and return lines * Steel construction and hydraulics prepped for retrofitting an auxiliary engine * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release system for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering function * Pre-installed fittings at the front bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Drawbar with 50 mm flange eye and height-adjustable tow bar * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * LED lights * Design version: 21 t GVW with reinforced frame and reinforced axles * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Pre-installed fitting at the front bulkhead for subsequent installation of container locks * Screw-on bulkhead, smooth steel plate * Split steel side walls, trapezoidal-profiled, foldable with central folding stanchion * Removable steel rear wall, can be slid in between ramps (bracket for storage provided inside at front bulkhead when not in use) * Rear stanchions bolted * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm * Profifix lashing rail centrally along vehicle axis for lashing up to LC 3000 daN * One 10 t lashing ring at each front and rear corner * Load securing package with two 8 t retractable lashing rings per side in the outer frame, various holes in front and end crossmembers for 1.2 t lashing options * One-piece mechanical grating-type ramps with spring assist for one-person operation, approx. 3,000 x 620 mm (can be retracted to 20 mm) * Rear approach angle approx. 860 mm at chassis * Drawbar, front bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black shade * Loading height unladen approx. 940 mm * Loaded approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 Fsdpfx Asl Tihxsm Sjpg * Side wall paintwork in desired RAL color shade (no special or metallic paint, color changeable up to approx. 6 weeks before completion) * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from CW 29 / 2026

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake chambers * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Fittings at the front bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * 21 t GVWR version with reinforced chassis and strengthened axles * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamp-mounted * Fittings at the front bulkhead for subsequent installation of container locks * Bolted smooth sheet metal front wall * Split side walls made of steel sheet, trapezoidal profile, foldable with central drop-in stake * Steel rear wall, can be inserted between the ramps—storage bracket for disuse located inside at the front wall * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * Profifix lashing rail centrally along the longitudinal axis, up to LC 3000 daN * 1 x 10 t lashing ring in each front and rear corner * Cargo securing package: 2 x 8 t recessed lashing rings per side in the outer frame; various bores for 1.2 t lashing points in the front and end carrier * One-piece mechanical grating loading ramps with spring mechanism for single-operator use, approx. 3,000 x 620 mm (can be collapsed to 20 mm width) * Rear approach slope approximately 860 mm on the chassis * Drawbar, front wall, tailgate, foldable supports, and loading ramps hot-dip galvanized Fpodpfx Amoq Dyu Ue Sog * Axles, springs, air tanks, and landing gear lacquered in black * Loading height (unladen) approx. 940 mm * Loading height (laden) approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Drop-side paintwork in your choice of RAL color (except special or metallic finishes), changeable up to approx. 6 weeks before completion * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 29 / 2026

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via PIN reverse gear * Additional lock for the trailing axle controlled from the tractor unit for maneuvering – without truck-side installation – assigned to PIN 10; lock must be deactivated before driving on public roads ----Suspension: * Air suspension with lift and lower system and RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * LED tail lights, 12/24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard as info tool installed with pressure sensors solely for total axle load display * 7-pin socket at the rear for overlength lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air reservoir * Mechanical crank landing gear * Galvanised steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning board package ----Low Loader Deck: * 50 mm floor covering made from larch/Douglas fir instead of spruce/fir * Rear incline – 700 mm long – at the gooseneck transition to the low-bed with checker plate covering and a perforated strip at the end for hanging aluminum loading ramps * Tread plate covering above the wheels * SP-Kombi package: Tool box with 45° corners made of galvanized steel sheet, additionally powder-coated in RAL 9006 white aluminum on the gooseneck platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the slanted corners * Folding aluminum side walls, 500 mm high, on the gooseneck platform, incl. folding and removable rear stakes * Plug-in aluminum rear panel, 150 mm high * 2nd king pin position * Preparation for container locking system * Preparation for three stowage recesses in the run-on slope from low-bed to gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding mounting sockets into the outer frame ----Load Securing: Gooseneck platform: * 50 mm holes at the front corners and front for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor at the slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings per side, recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally in front of the approach slope to the gooseneck * 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, each side, retractable and recessed in the outer frame * 4 stake pockets recessed in the outer frame on each side * Profifix lashing rail centered on the longitudinal axis (3 t lashing capacity per securing circuit) ----Excavator Boom Rest: * From the end of the last rigid axle to the rear crossmember, W= 770 mm, D= 270 mm (2 x 6.4 t lashing rings per side firmly welded in the boom rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum loading ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp shifting on sliding tube of the ramp shaft ----Hydraulics: Fpedpfeykx I Hsx Am Sjg * Hydraulic flow divider on the semi-trailer (if the truck’s hydraulic pump output exceeds 40 l/min up to a max. 250 l/min), climbing

Stav: nový, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 38 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, TS 2 ML ----Braking system: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional lock for the trailing axle from the driver's cab for shunting purposes — no truck-side installation required — assigned to PIN 10. The lock must be deactivated before driving on public roads. ----Suspension: * Air suspension with lifting and lowering device as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal — no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as infotool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General attachments: Fsdpfx Amsykx I Te Sspg * Aluminium air tanks * Mechanical crank landing gears * Galvanised steel mudguards * Swivel arm as a carrier for connecting lines in front of the front plate ----Warning package: * Mechanically adjustable warning sign package ----Low-loader platform: * 50 mm flooring made from larch / Douglas fir wood instead of spruce / fir * Rear slope — 700 mm long — on the semi-trailer platform to the low deck with checker plate covering and a perforated strip at the end for attaching aluminium approach ramps * Tear plate coverings above the wheels * SP combination package: toolbox with 45° corners made of galvanised sheet steel, additionally powder-coated in RAL 9006 white aluminium, installed on the semi-trailer platform approx. 2,480 x 500 mm * Top folding lid and side doors in the slanted corners * Foldable aluminium side walls, 500 mm high, on the semi-trailer platform, including rear stanchions, foldable and removable * Plug-in aluminium rear wall, 150 mm high * 2nd kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach slope from the low deck to the gooseneck * Preparation for retrofitting folding outriggers for 3 m width extension by welding in the bearing mounts into the outer frame ----Load securing: Semi-trailer platform: * Front corners and front 50 mm drilled holes for 1.2 t lashing capacity per hole * 2 x 16.5 t lashing rings recessed in the floor beside the approach slope * Perforated and bent outer frame 45 with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t recessed lashing rings in the outer frame Low-loader platform: * 2 x 16.5 t lashing rings centrally recessed directly in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings, recessed into the outer frame * Each side with 4 stake pockets, recessed in the outer frame * Profifix lashing rail centrally on the longitudinal axis (lashing option 3 t per lashing point) ----Excavator arm trough: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings in the excavator arm trough, firmly welded) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminium approach ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp movement on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider in th

Stav: nový, maximálna hmotnosť nákladu: 14 660 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 19,0: * Wabco EBS brzdový systém * RDÜ systém monitorovania tlaku v pneumatikách * Núdzové uvoľnenie pružinových valcov * Bubnové brzdy * 2 x 10 t BPW Eco nápravy * Parabolické listové pružiny - 110 mm široké - s tandemovým vyrovnávacím agregátom * Ťažná tyč s 50 mm prírubovým okom a výškovo nastaviteľná ťažná tyč * Predná stabilná podpera Jost * Zadné výklopné opory zvonka * Bočný ochranný rám proti nárazu * Plastové štvrtinové blatníky * 15-kolíkový elektrický konektor * LED zadné svetlá * 50 mm podlaha z ihličnatého dreva * Príprava pred čelnou stenou na dodatočnú montáž uzáverov kontajnera * Skrutkovaná čelná stena z hladkého plechu * Bočné steny z oceľového plechu - trapézový profil - sklopné s pružinovým zdvihákom bočnice Fedpfx Ael Th Hwjm Sjpg * Zadná oceľová stena zasúvateľná medzi rampy s držiakom vo vnútri pred čelnou stenou, ak sa nepoužíva * Skrutkované zadné stĺpiky * Perforovaný vonkajší rám ohnutý cca 45° so zaťažiteľnosťou 2 t každých 480 mm * Možnosť inštalácie 3 t závesných upevňovacích ôk každých 600 mm * V predných a zadných rohoch vždy 1 x 10 t upevňovacie oko, v čelnom a koncovom nosníku rôzne otvory na upevnenie 1,2 t * Profifix upevňovacia lišta v pozdĺžnej osi uprostred na upevnenie do LC 3000 daN * Jednodielne mechanické rampy s roštom a pružinovým mechanizmom pre jednoručnú obsluhu cca 2.750 x 620 mm (možno stiahnuť na 20 mm) * Zadný nábehový uhol cca 860 mm * Podvozok, ťažná tyč, čelná stena, zadná stena, rampy a výklopné opory žiarovo pozinkované * Náter bočníc v RAL 9010 čistá biela * Náter bočných stien v inom RAL odtieni za príplatok * Nápravy, pružiny, vzduchové nádrže, prírubové oko a stabilná podpera v čiernej farbe * Nové vozidlo s plnou zárukou výrobcu * Zmeny a predchádzajúci predaj vyhradené * Dostupné približne od týždňa 21/2026 * Ilustračné fotografie

Stav: nový, maximálna hmotnosť nákladu: 14 660 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 19,0: * Wabco EBS brzdový systém * RDÜ systém monitorovania tlaku v pneumatikách * Núdzové vypúšťanie pre pružinové brzdové valce * Bubnové brzdy Fpsdpsl Th Hlsfx Am Sog * 2 x 10 t BPW Eco nápravy * Parabolické pružiny - 110 mm široké - s tandemovým vyrovnávacím agregátom * Ťažné oje s 50 mm prírubovým ťažným okom a výškovo nastaviteľné oje * Predný podperný zdvihák Jost * Vonkajšie vyklápacie podpery vzadu * Bočný nárazový ochranný systém * Plastové štvrť-blatníky * 15-pólová elektrická zásuvka * LED zadné svetlá * 50 mm podlaha z ihličnatého dreva * Pred prednou stenou pripravená montážna sada pre dodatočnú montáž kontajnerových zámkov * Skrutkovaná predná stena z hladkého plechu * Bočné steny z oceľového plechu – trapézový profil – sklopné s plynovou pružiou na sklápanie * Oceľová zadná stena zasúvateľná medzi rampy – držiak pri nevyužívaní vo vnútri pri prednej stene * Zadné stĺpiky skrutkované * Dierovaný vonkajší rám, ohnutý cca 45 stupňov, s viazací silou 2 t každých 480 mm * Možná montáž 3 t padacích upevňovacích oka každých 600 mm * V každom rohu vpredu a vzadu 1 x 10 t viazacie oko, vo prednej i zadnej priečnej stene rôzne otvory na upevnenie 1,2 t * Profifix upevňovacia lišta pozdĺž stredu vozidla pre upevňovacie možnosti až do LC 3000 daN * Jednodielne mechanické roštové najazdové rampy s pružinou pre jednému obsluhu, cca 2 750 x 620 mm (zúžiteľné na 20 mm) * Zadný najazdový sklon cca 860 mm * Podvozok, oje, predná stena, zadná stena, nájazdové rampy a výklopné podpery žiarovo pozinkované * Nátery bočníc v RAL 9010 čistobiele * Nátery bočných stien možné vo farebnom odtieni RAL za príplatok * Nápravy, pružiny, vzduchové nádrže, prírubové ťažné oká a podperný zdvihák natreté čiernou farbou * Nové vozidlo s plnou zárukou výrobcu * Zmeny a medzipredaj vyhradené * Dodanie cca od 21. týždňa roku 2026 * Ilustračné obrázky

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Fpsdpfx Aeq Ra D Ejm Seg ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right exterior on headboard ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Load Area: * Load area: 6.27 m * Suitable for container transport * 50 mm softwood floor * Bracket in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Sidewalls made of steel sheet, trapezoidal profile, foldable, with spring-assisted dropside devices * Steel rear wall can be fitted between ramp mounts, stowed inside in front of the headboard when not in use * Rear posts bolted ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * 3 t recessed lashing rings can be installed every 600 mm * 1 x 6.3 t lashing point each at front and rear corners * Various holes in front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical drive-on ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Approach slope at rear approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Coating: * Hot-dip galvanized chassis, drawbar, headboard, rear wall, rear posts, and drive-on ramps * Sideboard coating in RAL 9010 pure white * Sidewall coating in any RAL color available at extra cost ----Information: * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: * Available from KW (calendar week) [please specify]

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles Fpodpfspk D D Hox Am Ssg * Air suspension, drawbar with 50 mm flanged towing eye and height-adjustable drawbar * Front Jost landing gear * Rear external folding supports * Toolbox made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (black powder-coated) * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm * 50 mm softwood floor, clamped version * Front wall pre-fitted for subsequent installation of container locks * Bolted front wall made of flat steel sheet * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Steel rear wall, can be inserted between the ramps – storage bracket in front of the front wall when not in use * Rear stanchions bolted * Perforated external frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner front and rear: 1 x 10 t lashing ring; in the front and rear cross-member: several holes for 1.2 t lashing options * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible down to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, tailboard, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a black tone * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Drop sides painted in RAL 9010 pure white * Side walls paintable in any RAL color for an additional charge * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing leg at front Fpsdpfx Aervvfwem Ssg * External galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right on the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Mounting device in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth plate * Drop-down sidewalls made of trapezoidal profiled steel with folding wall spring assist * Removable steel rear wall slot-in between ramp supports when not in use, stored inside in front of the bulkhead * Bolt-on rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree edged, with 2 t lashing capacity every 480 mm * Option for 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 6.3 t lashing point * Various predrilled holes in front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical drive-on ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) * Rear approach ramp approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stanchions and drive-on ramps * Side wall paint finish in RAL 9010 pure white * Sidewall painting available in alternative RAL colors at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: ?Available from week KW

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost support crank at the front * External folding supports at the rear * Tool box made of galvanized steel plate approx. 650 x 350 x 320 mm, right-hand side (black powder-coated) * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package on chassis for drill rig transport – load height +20 mm * 50 mm softwood floor, clamped design * Provision at front bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Side panels made of trapezoidal profiled steel, folding with drop-side lifting aids * Steel rear wall slidable between ramps – storage bracket inside at front bulkhead when not in use * Rear stanchions bolted * Perforated outer frame approx. 45° bent, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner 1 x 10 t lashing ring; various holes in front and rear cross-members for 1.2 t lashing options * One-piece mechanical steel grate ramps with spring assist for one-person operation, approx. 2,750 x 620 mm (can be pushed together up to 20 mm) * Rear approach angle approx. 860 mm Fpsdspk D Ncepfx Am Ssg * Chassis, drawbar, bulkhead, tailgate, rear folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and support crank painted in black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Side panels painted in RAL 9010 pure white * Painting of side panels in a RAL color of your choice available at extra cost * New vehicle with manufacturer's warranty * Subject to error and prior sale * Available immediately ex stock Egestorf

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Fjdpfx Amoy Rr Iho Sspg

Stav: použitý, pohotovostná hmotnosť: 8 850 kg, maximálna hmotnosť nákladu: 31 150 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2019, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Celková dĺžka ložnej plochy cca 9.500 mm, dĺžka ložnej plochy hlbokého lôžka cca 7.360 mm, nakladacia výška cca 910 mm, 14 párov kotviacich ôk, vozidlo ponúkané na zákazku. Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie. Viac údajov na vyžiadanie! Fsdsy Nixhopfx Am Sjpg

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Fpsdsy Izwyopfx Am Seg

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: ! Fedpfxjy Izvvo Am Sjpg

Stav: použitý, maximálna hmotnosť nákladu: 39 500 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2010, ďalšia kontrola (TÜV): 12/2026, dĺžka ložného priestoru: 9 345 mm, Rok výroby: 2010, * Müller Mitteltal T50 Kompakt * Nízka nakladacia plošina (tieflader) * Rámpy * Pneumatiky: viď fotografie * 5 náprav * Gigant nápravy * Povolená celková hmotnosť: 50 000 kg * Pohotovostná hmotnosť: 10 500 kg * Užitočné zaťaženie: 39 500 kg * Vzduchové odpruženie * Okamžite k dispozícii * Možnosť chyby vyhradená Máte otázky? Kontaktujte nás pre rýchlu konzultáciu, prípadne priamo cez WhatsApp: Fodsyzlyxopfx Am Sopg Ponúkame: Čistý nákup pre firmy z EÚ s platným IČ DPH, rovnako aj pre zákazníkov z tretích krajín. Možnosť leasingu a financovania. Zabezpečenie všetkých colných formalít. Vystavenie krátkodobých a vývozných ŠPZ. Doprava do prístavu. Všetky ceny na portáli Kleinanzeigen sú uvedené ako ceny s DPH a zahŕňajú zákonnú DPH vo výške 19 %.

Stav: použitý, maximálna hmotnosť nákladu: 16 950 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2006, ďalšia kontrola (TÜV): 04/2026, Rok výroby: 2006, * Müller Mitteltal T3 NG * Low-bed trailer * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tires: see pictures * BPW axles * Immediately available * Subject to errors and prior sale Do you have any questions? Contact us for a quick consultation—feel free to reach out directly via WhatsApp: We offer: Net purchase for companies within the EU holding a VAT ID number and for customers from non-EU countries. Leasing and financing options. Handling of all customs formalities. Fsdpfx Ajyv Ug Djm Sopg Issuance of temporary and export license plates. Transport to the port. All prices advertised are gross prices and already include the statutory VAT of 19%.

Stav: použitý, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 14 700 kg, prvá registrácia: 02/2001, ďalšia kontrola (TÜV): 10/2024, celková šírka: 25 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17.5 / 10mm, veľkosť prednej pneumatiky: 235 / 75 R 17.5 / 10mm, prevádzková hmotnosť: 24 000 kg,

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: Fpsdpfx Amsylfvmo Ssg * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026