Müller-Mitteltal Tiefladeanhänger T 3 Profi 30,0 Tiefladeranhänge kúpiť použité (64 677)

Stav: použitý, maximálna hmotnosť nákladu: 7 100 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2007, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 1 100 mm, celková šírka: 2 550 mm, Vozidlo / Nadstavba: Tandemový trojstranný sklápací vozík Prvá registrácia: 07/07 Celková hmotnosť: 10.000 kg Prevádzková hmotnosť: 2.900 kg Užitočné zaťaženie: 7.100 kg Celková dĺžka: 6.900 mm Dĺžka ložnej plochy: 5.000 mm Šírka: 2.550 mm / Šírka ložnej plochy cca 2.450 mm Výška ložnej plochy: cca 1.100 mm Ďalšie informácie - 40 km/h Pedpfxjyz H Azj Anrogk - 500 mm bočnice - 500 mm pozinkovaný predný nadstavec - 7 párov kotviacich ok na ložnej ploche - 4 páry kotviacich ok pod nadstavbou zvonka - Podperná noha - Zadná podpera - Pružina na zdvíhanie bočnice - Nástupné rampy voliteľné za 1.280,00 €

Stav: použitý, maximálna hmotnosť nákladu: 7 000 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/1999, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 1 100 mm, celková šírka: 2 550 mm, Celková hmotnosť: 10.000 kg Prázdna hmotnosť: 2.000 kg Užitočné zaťaženie: 7.000 kg Celková dĺžka: 6.900 mm Dĺžka ložnej plochy: 5.000 mm Šírka: 2.550 mm / Šírka ložnej plochy cca 2.450 mm Výška ložnej plochy: cca 1.100 mm Ďalšie informácie - 40 km/h - Bočnice 500 mm - 500 mm galvanizovaný čelný nadstavec Pjdpfx Anoyz H A Ierogk - 8 párov kotviacich ok na ložnej ploche - 4 páry kotviacich ok pod nadstavbou zvonka - Nápravy BPW - Podperná noha - Pružina na zdvíhanie bočnice - Nájazdové rampy voliteľné 1.280,00 €

Stav: použitý, pohotovostná hmotnosť: 8 800 kg, maximálna hmotnosť nákladu: 31 200 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/1996, dĺžka ložného priestoru: 10 000 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 1 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 4 nápravy, otočný záves, listové odpruženie, rozšíriteľný na 3 m, upevňovacie oká, dvojdielne najazdové rampy, hydraulické rampy, zadná podpera, bočná hliníková ochrana, dvojmontáž pneumatík, úložný box. Nadstavba: 4-nápravový nízkoložný príves s hydraulickými dvojdielnymi rampami. Nakladacia výška cca 900 mm. 4x 10t náprava SAF, bubnové brzdy, ťažné oko 40 a 50 mm! Dĺžka horného plošiny cca 2900 mm! Dĺžka dolného plošiny cca 7100 mm! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a omyly vyhradené! Podpfx Aneywvhrerjgk

Stav: použitý, maximálna hmotnosť nákladu: 16 950 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2006, ďalšia kontrola (TÜV): 04/2026, Rok výroby: 2006, * Müller Mitteltal T3 NG * Nízkonákladový přívěs (Nákladní vlek) * Nájezdové rampy * Dvojmontáž (dvojitá kola) * Povolená celková hmotnost: 24 000 kg * Pohotovostní hmotnost: 7 050 kg * Užitečná hmotnost: 16 950 kg * Pneumatiky: viz fotografie * Nápravy BPW * Okamžitě k dodání * Změny a omyly vyhrazeny Nabízíme: Nákup bez DPH pro firmy z EU s platným DIČ a pro zákazníky ze třetích zemí. Možnost leasingu a financování. Vyřízení veškerých celních formalit. Vystavení dočasných a exportních registračních značek. Zajištění přepravy do přístavu. Pgedpfxsyv Ug De Anrok Veškeré ceny uvedené v inzerátech jsou konečné (hrubé) a již zahrnují zákonnou DPH 19 %.

Stav: použitý, pohotovostná hmotnosť: 3 210 kg, maximálna hmotnosť nákladu: 8 690 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2021, ďalšia kontrola (TÜV): 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R17.5, Rok výroby: 2021, Výbava: ABS, Nemecké vozidlo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trojstranný sklápací náves s podskrutkovanými rampami Rok výroby: 05/2021 pozinkovaný Celková hmotnosť: 11 900 kg Prevádzková hmotnosť: 3 210 kg Užitočné zaťaženie: 8 690 kg Rozmer pneumatík: 235/75 R 17,5 tandemová náprava menej ako 1 m Ťažné zariadenie plynulo výškovo nastaviteľné, žiarovo pozinkované, ťažné oko 40 mm Rám pozinkovaný Nápravy BPW Výška podlahy: 0,93 m Možnosť ďalších služieb! Exportné značky (červené / 30 dní) Nemecko Prevozné značky (žlté / 5 dní) Nemecko Rakúske prevozné značky je možné sprostredkovať Dovoz vozidla (za poplatok) Psdpfjyxbgcjx Anregk Údaje z internetu sú nezáväznými popismi. Nepredstavujú garantované vlastnosti. Predajca nezodpovedá za chyby, preklepy a chyby pri prenose dát. Predaj s výhradou medzipredaja. Predaj len podnikateľom. Platné sú výhradne naše VOP.

Stav: použitý, pohotovostná hmotnosť: 3 210 kg, maximálna hmotnosť nákladu: 8 690 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2021, ďalšia kontrola (TÜV): 06/2026, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 500 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R17.5, Rok výroby: 2021, Výbava: ABS, Nemecké vozidlo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trojstranný sklápací náves s podskrutkovanými rampami Pgodpfx Anjyw N Npsrsk Rok výroby: 05/2021 pozinkovaný Celková hmotnosť: 11 900 kg Prevádzková hmotnosť: 3 210 kg Užitočné zaťaženie: 8 690 kg Rozmer pneumatík: 235/75 R 17,5 tandemová náprava menej ako 1 m Ťažné zariadenie plynulo výškovo nastaviteľné, žiarovo pozinkované, ťažné oko 40 mm Rám pozinkovaný Nápravy BPW Výška podlahy: 0,93 m Možnosť ďalších služieb! Exportné značky (červené / 30 dní) Nemecko Prevozné značky (žlté / 5 dní) Nemecko Rakúske prevozné značky je možné sprostredkovať Dovoz vozidla (za poplatok) Údaje z internetu sú nezáväznými popismi. Nepredstavujú garantované vlastnosti. Predajca nezodpovedá za chyby, preklepy a chyby pri prenose dát. Predaj s výhradou medzipredaja. Predaj len podnikateľom. Platné sú výhradne naše VOP.

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tyre pressure monitoring system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalisation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanised steel skirts, each with spray protection * Reflective contour tape on sides and rear * Tool box made of galvanised steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanised) for tool box on turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 50 mm draw eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swivelling and retractable, loadable in all directions and recessed into the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the centre of the loading area * One-piece hot-dip galvanised hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on taper) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanised * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tyres * Unladen weight approx. 5,980 kg * Technical permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026 Psdpol Th I Asfx Anregk

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles Pgodpfxol Th Nnj Anrjk * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for toolbox located on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 50 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lash-down points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of bogie platform, 6 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t each * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear tapered section) * Widening planks stored in the center of the loading area * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control block for retrofitting hydraulic sideways ramp displacement * Loading platform above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Own weight approx. 5,980 kg * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Errors and intermediate sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14,4 plošina: ----Brzdy: * EBS (elektronický brzdový systém) * Núdzové uvoľnenie pre pružinové brzdové valce * Bubnové brzdy ----Nápravy: * 2 x 7 t BPW nápravy ----Pruženie: Podpfsv D Tbksx Anrjgk * Vzduchové pruženie so zdvíhacími a spúšťacími zariadeniami ----Ťažné zariadenie / prírubové oko: * výškovo nastaviteľné ťažné zariadenie o 300 mm * Skrátené ťažné zariadenie o cca 200 mm na cca 1 800 mm (tým pádom B-rozmer cca 8 080 mm) * 40 mm prírubové ťažné oko ---- Elektrika / Osvetlenie: * 15-pólová elektrická zásuvka * LED svetelný systém 12 / 24 V * 2 LED cúvacie svetlá navyše vzadu (ovládané spiatočkou) * 1 LED výstražný maják (odnímateľný vrátane držiaka) vzadu * RDÜ (monitorovanie tlaku v pneumatikách) ----Všeobecná výbava: * mechanicky nastaviteľné 3 m varovné tabuľové balíky vpredu a vzadu * Podperná kľuka vpredu * Vonkajšie sklopné podpery vzadu * Plastové náradie cca 750 x 350 x 300 mm po oboch stranách vľavo aj vpravo * Bočná ochrana proti nárazu * Ochrana proti podjazdu * Plastové štvrť-blatníky ----Nakladacia plocha: * 400 mm vysoká skrutkovaná čelná stena * 50 mm podlaha z mäkkého dreva * 2 páry kontajnerových uzáverov (vysúvateľné na vonkajšiu šírku kontajnera 3 m) a zaistiteľné, uzamykací rozmer zasunuté podľa ISO - DIN 15190 = 2 259 mm. Kontajnerové uzávery vysunuté = 2 819 mm (tento rozmer nie je podľa DIN) pri absolútnej vonkajšej šírke 3 000 mm ----Zaistenie nákladu: * perforovaný vonkajší rám zahnutý pod uhlom cca 45 stupňov s 2 t upevňovacou silou každých 480 mm * Možnosť zabudovania 3 t sklopných upevňovacích ôk každých 600 mm – na každej strane zabudovaných 5 x 3 t UVV upevňovacích ôk * V predných a zadných rohoch vždy 1 x 6,3 t upevňovacie oko (vpredu priamo za uzávermi kontajnerov v drevenej podlahe, vzadu v záverečnom nosníku) * V čelnej a koncovej priečke rôzne otvory pre možnosti upevnenia do 1,2 t ----RAMPY: * 1 pár hliníkových zasúvacích rámp cca 3 570 x 410 mm (nosnosť 10 t / pár) vhodných pre pneumatikové aj pásové vozidlá * Úložný priestor zozadu pod nakladacou plochou, zabudovaný v ráme vozidla ----Lakovanie: * ---Rám, ťažné zariadenie, čelná stena, ochrana proti podjazdu a zadné podpery žiarovo zinkované--- * Nápravy, vzduchový zásobník, predná podperná kľuka a prírubové oko lakované v čiernom odtieni ----Informácie: * Nové vozidlo s továrenskou zárukou * Zmeny a predaj počas ponuky vyhradené ----Doba dodania: * dostupné od 22. týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 10 950 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-ER 14.4 Platform: ---- Brakes: * EBS (electronic braking system) * Emergency release device for spring brake chambers * Drum brakes ---- Axles: * 2 x 7 t BPW axles Podpfx Asv D Tbdsnregk ---- Suspension: * Air suspension with raising and lowering function ---- Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at rear (activated via reverse gear) * 1 removable LED beacon (incl. holder) at rear * TPMS (Tire Pressure Monitoring System) ---- General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing leg at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, on left & right sides * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ---- Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor, * 2 pairs of container locks (extendable to 3 m container external width) and lockable, lock dimensions when retracted as per ISO - DIN 15190 = 2,259 mm, container locks extended = 2,819 mm (this dimension is non-DIN) with an overall external width of 3,000 mm ---- Load Securing: * Perforated external frame approx. 45 degrees angled with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing brackets every 600 mm possible—5 x 3 t UVV lashing brackets each side installed * In the front and rear corners 1 x 6.3 t lashing ring each (front directly behind container locks in wood floor and rear in end crossmember) * Various bores in front wall and rear crossmember for 1.2 t lashing options ---- Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Rear stowage compartment below the platform, integrated into the chassis ---- Painting: * --- Chassis, drawbar, front wall, rear underrun protection and rear stabilisers hot-dip galvanised --- * Axles, air tanks, front landing leg as well as flange towing eye painted in black ---- Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ---- Delivery Time: * Available from calendar week 22/2026

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal -no truck-side installation required- * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar by approx. 300 mm with 40 mm flanged towing eye * Jost mechanical landing gear at front * 2 mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side of the chassis, front * 15-pin power connector * LED tail lights 12/24 V * Bolted underrun protection * Plastic quarter mudguards * Net hooks at the central locking brackets as well as 2 at the front wall * Chassis made from fine-grain steel * Steel pallet 3-way tipper body with reinforced Strong sideboards (continuous side panels on top with internal pipe reinforcement -without center stakes- foldable with sideboard spring lifter) * Rear stakes bolted * Combination steel wing doors at the rear, 2-leaf, asymmetrically split, swiveling and lockable up to 270°, not foldable, with additional pendulum frame for automatic tailgate opening during tipping process, rear lock via galvanized rotary bolt and central locking, deactivation function for automatic tailgate operation when tipping backwards with open wing door * In each corner 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side * 4 mm floor plate made of fine-grain steel * Rear mounting rail for loading ramps * Body – reinforced – with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment below the loading area rear, integrated in the chassis for the ramps Pgedjx Hm Rispfx Anrjk * Drawbar, underrun protection, rear stake, folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black * Tires 358/55 R 19.5 * Sideboard coating in RAL 9010 pure white * Side wall paint in an RAL shade available at extra charge * Subject to errors and prior sale * Immediately available from calendar week 10/2026 * Sample photos

Stav: nový, maximálna hmotnosť nákladu: 10 660 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal—no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit Pgedpfx Anox Hm Rcsrjk * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Tie-down hooks at each central locking housing and 2 on the front bulkhead * Chassis made of fine-grained steel * Steel three-way tipper body with reinforced Strong side walls (continuous upper side panels with internal tube reinforcement—without central stanchions—side walls foldable with sidewall spring lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split—270° swing and lockable—not foldable—and with additional swing frame for automatic tailgate opening during tipping, rear locking via galvanized rotary lock and central locking, deactivation function for automatic tailgate when tipping backwards with open wing doors * 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm fine-grained steel floor plate * Rear ramp rails mounting track * Reinforced body with load securing certificate * 1 pair aluminum ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment recessed under the loading area at the rear, integrated into chassis for ramps * Drawbar, underrun guard, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing gear painted black * Tires: 358/55 R 19.5 * Side boards painted RAL 9010 pure white * Painting of side panels in RAL color of choice available for a surcharge * Errors and prior sale excepted * Immediately available ex stock from CW 10/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 13 410 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 900 mm, objem nakladacieho priestoru: 11 m³, Rok výroby: 2026, * Wabco EBS-E (elektronický brzdový systém s RSS) * Núdzové uvoľnenie pre pružinové brzdové valce * Bubnové brzdy * Systém monitorovania tlaku v pneumatikách s možnosťou zobrazenia na displeji nákladného vozidla prostredníctvom EBS signálu – bez montáže na strane vozidla – * 2 x 9 t Gigant nápravy * Vzduchové odpruženie s kontrolou výšky počas sklápania * Ťažné oko s 50 mm prírubou (posuvné o +77 mm a -33 mm prostredníctvom odsadzovacej dosky) * Jost podperná podpera vpredu * Sklopný pozinkovaný oceľový podbehový ochranný kryt pre zásobovanie finišérom * Uzavreté plastové jednostranné blatníky * Stojacia plošina pri čelnej stene * Mechanická rolovacia plachta * 15-pólová elektrická zásuvka * LED koncové svetlá s pozinkovanou ochrannou strieškou * Podvozok z jemnozrnnej ocele * Oceľová trojstranná korba (bočné steny s MM profilom – priebežné bez stredného stĺpika – výkyvné cez manuálne centrálne zamykanie, ľavá strana sklopná s pružinovým zdvihákom) * Rolovacia plachta podobná RAL 7038 achátovo sivá s napínaním pomocou račňových napínačov po stranách a elastickými lanami vpredu a vzadu * Čelná plošina z roštového plechu so stupňom na ťažnom ramení a držadlom na čelnej stene * Zadná stena z HBW 400 ocele – výkyvná cez automatické dvojité pazúrové uzáverie * 5 mm oceľová podlaha z HBW 450 ocele * Po stranách po 4x 3 t zápustné a sklopné upevňovacie oká, zabudované v oceľovej podlahe * Zosilnená a certifikovaná nástavba podľa EN 12642 XL vrátane certifikátu zabezpečenia nákladu do 19 t * Sklápacia plošina a bočné steny v RAL 9010 čisto bielej * Lakovanie bočných stien v dohodnutom farebnom odtieni RAL za príplatok možné Pedpfxsxl Nkge Anrsgk * Podvozok lakovaný v RAL 9011 grafitovo čiernej * Nové vozidlo s plnou výrobcom poskytnutou zárukou * Zmena údajov a predaj vyhradený * Ihneď k dispozícii v Egestorfe

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: Podpfoq Euaksx Anrogk * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards Pgsdpfx Ajtpta Denrsk * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering device including return-to-ride (RtR) valve * Smart-Board installed on trailer as info tool (for axle load display – front and rear separate) * Tyre pressure monitoring system with in-cab display via EBS signal, no installation required on the truck * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels front and rear * VA plastic quarter mudguards with spray protection * Rear straight galvanized steel skirts with spray protection * High-visibility reflective contour tape laterally and at the rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via traction spring & turnbuckle Pjdpfstplwiox Anrogk * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Equipment box within turntable with folding lid, 2 container locks permanently fitted (directly after turntable platform) * ROBOT-welded anti-slip surface on steel plate of the turntable platform (raised weld seams) * Load securing package (La-Si-Paket) includes: 2 lashing eyes (13.4 t) front left & right on front wall support, 1 pair each front & rear UVV lashing rings (13.4 t), 3 pairs per side of swiveling and retractable UVV lashing rings (10 t), loadable in any direction, integrated into external frame, plus 3 stake pockets per side with simultaneous 2 t lashing point * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear slope) * Extension planks stored in centre of load area * Hydraulic one-piece access ramps approx. 3,000 x 720 mm * Mechanically adjustable laterally * 4-way hydraulic valve block for later retrofitting of hydraulic ramp shifting * Excavator arm rest spanning rear axle up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, positioned sideways in main frame * 2 galvanized steps at turntable, left and right * Profifix lashing rail centered lengthwise in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop leg supports and access ramps hot-dip galvanized * Axles, turntable ring, air tanks, and drawbar painted in black finish * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Errors and prior sales excepted * Available approx. from calendar week 22/2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 380 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles Pgsdpfx Aexptn Rsnrjk * Air suspension with lift/lower function and RtR-valve * Smart-Board infotool mounted on trailer (for axle load display – front and rear individually) * Tire pressure monitoring with display capability in the truck via EBS signal, without installation required on the truck side * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanized steel skirts with spray protection * Reflective contour marking strips on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Storage box in the turntable for accessories, with hinged lid, 2 container locks permanently installed (directly after turntable platform) * ROBOT-welded anti-slip surface on the steel plate of the turntable platform (projecting weld beads) * Load securing package including: 2 lashing eyes (13.4 t) at front left & right on the bulkhead beam, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs each side of UVV lashing rings (10 t), pivotable and lowerable, loadable in all directions and recessed in the outer frame; 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3-meter overall width (not in rear bevel) * Width boards stored centrally on the loading platform * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way valve block for future retrofitting of hydraulic ramp adjustment * Continuous excavator arm rest above rear axle up to end beam (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6,400 daN in excavator arm rest, mounted laterally in the longitudinal frame * 2 galvanized steps at the turntable, left and right * Profifix lashing rail in the center axis, in flat area for lashing up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted in black * Loading edge height approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available approx. from CW 22/2026 * Sample photos

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release system for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering device ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck cab via EBS signal – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing spotlights (activated by reverse gear) * LED lighting ----General Equipment: * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix external frame, 45° angled, perforated for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lashing rings on each side * 5 pockets on each side for posts 100 x 50 mm in the outer frame (posts not included) * 30 mm phenolic plywood floor ----Drum supports: Pgedpfjx Nli Nex Anrek * 3 galvanized drum supports, secured by container locks, with side forklift pockets, 800 mm center/center (pocket width: 185 mm) * Maximum drum diameter: 2,600 mm; maximum drum width: 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * Maximum drum weight per drum support: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum axle * Steel drum axle, diameter 76 mm, with centering and rotatable ends * 2 locating rings * 2 polyamide centering cones * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and uncoiling ----Loading height: * Loaded approx. 1,040 mm ----Painting: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in black shade ----Information: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from CW 28/2026

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes Pjdpfxox Nlkae Anrjgk ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raising and lowering system ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck's display via EBS signal -without installation on the truck side- * 15-pin power socket * 2 additional LED reverse lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Stainless steel side toolbox, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, with hole pattern for lashing devices; lashing force per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop-in lashing rings at approx. 600 mm intervals - 12 x 3,000 kg lashing rings included per side * 5 pockets per side for 100 x 50 mm pipe stakes in the outer frame - stakes not included in delivery * 30 mm phenolic plywood floor ----Cable Drum Supports: * 3 galvanised cable drum supports, secured with container locks, with side forklift pockets spaced 800 mm centre/centre (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per support: 6,000 kg * No drive or drum brake * Support arm with tension lock for securing the drum axle * 76 mm diameter steel drum axle, centred, with rotating ends * 2 locating rings * 2 polyamide centring cones * 4 x 3.2 t lashing eyes on support arms for customer lashing to prevent drum rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection: hot-dip galvanised * Axles painted in black

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Brake system: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display function in the truck cockpit via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General attachments: * Aluminium air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform body: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Installation of 3,000 kg drop-in lashing brackets possible at approx. 600 mm intervals – each side supplied with 12 x 3,000 kg lashing brackets as standard * Each side with 5 pockets for stanchions 100 x 50 mm in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum supports: * 3 galvanised drum supports secured with container locks, with side forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * Maximum drum weight per cable drum support: 6,000 kg * Without drive and drum brake Pgedpfx Ansx Nlkgorjk * Support arm includes clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 polyamide centring cones * 4 x 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable bogie, drawbar, outer frame and underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available from week 28 / 2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake actuators * Drum brakes ----Axles: Pgedpfx Ajpk D I Asnrek * 3 x 11 t BPW Eco Plus axles * Last axle is trailing-steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering device and RtR valve ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * Smartboard control unit mounted on trailer as information terminal with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED rotating beacon at rear left ----General Attachments: * Side underrun protection * Landing gear at the front and mechanical swing-out supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low-bed Surface: * Saddle platform with 45° chamfered front corners and front toolbox made from galvanised steel plate, dimensions: W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white), foldable and removable on the sides of the saddle platform * Rear panel 150 mm high, slotted in * Rear bevel on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Chequer plate above the axles ----Widenings: * 8 mechanical folding extensions to 3 m overall width (extensions not present in the rear slope; planks for extension provided with storage on the saddle platform) * Mechanically adjustable warning board sets front and rear ----Load Securing (Lashing Package): * On the saddle platform: 2 x 6.3 t lashing rings each as well as 3 x 5 t lashing bars per side on the outer frame * On the low-bed: 2 x 13.4 t lashing rings per side and 4 x 10 t swingable/lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring in the excavator arm rest at rear * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Rest: * Excavator arm rest runs continuously from end of last rigid axle over steering axle to end cross member with integrated reinforcement profile, approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, single-piece, hot-dip galvanised hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve for possible later retrofit of hydraulic ramp shift by customer * Outer board of the ramp made from 50 mm hardwood * Climbing laths on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic oil flow divider in trailer (for hydraulic pump output in truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (including 860 mm approach slope) ----Fifth-Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paint Coating: * Chassis, ramps, rear folding supports, widening consoles all hot-dip galvanised * Axles, landing gear, air tanks painted in black * Vehicle is hot-dip galvanised ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may depict equipment not included in the offered vehicle ----Delivery Time: * Available from week 26/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lower function and RtR valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as info tool with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gear at front, mechanical swing-down supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted underneath chassis on right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminium sideboards (RAL 9010 pure white) on sides of platform * Rear wall inserted at 150 mm height * Rear going slope at platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Chequer plate above axles ----Widenings: * 8 x mechanical folding extensions to 3 m overall width (not in rear slope). Extension planks present, stored on fifth wheel platform * Mechanically adjustable warning sign kits at front and rear ----Load Securing (Lashing Package): * On fifth wheel platform: 2 x 6.3 t lashing rings each, plus 3 x 5 t lashing bars on outer frame per side * On low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, swivelling and lowerable, integrated into outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring in excavator stick recess at the rear * 2 x container locks directly after gooseneck in low-bed platform ----Excavator Stick Recess: * From end of last fixed axle, over steering axle to rear crossmember, continuous with internal reinforcing profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future retrofitting by customer for hydraulic ramp shifting * Outer plank of ramp made of 50 mm hardwood * Climbing strips on outer ramp frame and on approach slope Pgsdpjl Tnvgefx Anrek ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance from tractor unit between 40 l/min and 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Saddle Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, widening consoles hot-dip galvanized * Axles, landing gear, air tanks painted black * Vehicle is galvanized ----Information: * New vehicle with manufacturer warranty * Errors and prior sale excepted * Sample photos may show equipment not included with the offered vehicle ----Delivery Time: * available from calendar week 26/2026

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * Wabco EBS * RDÜ (tire pressure monitoring system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem balancing unit * Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin electrical connector * LED tail lights * Hot-dip galvanized bolted underrun protection * Side-mounted tool box, right, made of galvanized steel sheet * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous side walls at the top with internal tube reinforcement, foldable without central stanchions, with drop side spring-assist * Rear gate foldable and pivoting with manual central locking * Hot-dip galvanized, bolted rear stanchions * 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings each side integrated into the outer frame * 4 mm fine grain steel plate floor * Net hooks, rear mounting rail for loading ramps * Prepared for subsequent installation of extension boards * Reinforced body with load securing certificate according to EN 12642 XL * 2-step entry on the left side as step-up aid * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment at the rear, recessed into the chassis below the loading area Pjdpfx Ael Th A Eonrogk * Axles, springs, air tanks, and landing gear painted black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle without first registration, with manufacturer’s warranty * Tyres: 385/55 R 22.5 * Side boards painted in RAL 9010 pure white * Painting of the side walls in an RAL colour shade available at extra cost * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, * Wabco EBS (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring brake chamber * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalization unit * Height-adjustable drawbar (approx. 300 mm), hot-dip galvanized, with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin electrical connector * LED tail lights * Hot-dip galvanized, bolted underride guard Podov Dz N Njpfx Anrsgk * Lockable toolbox made of galvanized sheet steel, right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous side walls with internal tube reinforcements (no centre stanchions), drop sides with sideboard spring assist * Rear tailgate foldable and swinging with manual central locking * Screwed, hot-dip galvanized rear stanchions * Each corner fitted with one 5 t lashing point, each side with four 3 t lashing rings integrated in outer frame * 4 mm fine-grain steel floor plate * Net hooks, rear ramp mounting rail * Preparation for later retrofitting of sideboard extensions * Reinforced body with load securing certificate according to EN 12642 XL * 2-step access step on the left side as boarding aid * 1 pair aluminium loading ramps, approx. 3570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment recessed under the load bed in the chassis * Axles, springs, air tanks and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle without first registration, with manufacturer's warranty * Tyres: 385/55 R 22.5 * Sideboard painting in RAL 9010 pure white * Side wall painting in any RAL colour available at extra cost * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4: Pgsdpfxsl Th Hts Anrsk * Wabco ABS system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 tonne Gigant axles * Parabolic suspension with tandem equalizer unit * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underride protection * Plastic quarter mudguards * Net hooks at each position of the central locking, plus 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body, continuous side panels with internal tube reinforcements, drop sides without central stanchions, foldable with side wall spring lifts * Bolted rear stanchions * Combination steel wing doors at the rear, asymmetrically split 2-wing design, can pivot and lock at 270°, not foldable, with additional pendulum frame for automatic rear wall opening during tipping operation, locking via galvanized rotary rod lock at the rear and central locking, deactivation function for the automatic rear wall function when tipping backwards with the wing door open * Each corner fitted with one 5-ton lashing point, four 3-ton lashing rings recessed into the outer frame on each side * 4 mm fine-grain steel floor plate * Rear mounting rail for loading ramps * Reinforced superstructure with load securing certificate * 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 tons per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed into the chassis below the loading surface, accessible from the rear * Chassis, drawbar, underride guard, rear stanchion and folding supports at the rear hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tyres: 285/70 R19.5 * Side panels painted to RAL 9010 pure white * Painting of side walls in other RAL colours possible at extra cost * Vehicle has a day permit (unused) * Errors and prior sale excepted * Immediately available ex Egestorf