Müller-Mitteltal 3 Seitenkip.- Strongw., 10 To Rampen kúpiť použité (50 858)

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin as well as additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated steel sheet and spare wheel holder as basket version, mounted right side * Closed single plastic mudguard at front * Straight rear steel mudguards each with spray protection (anti-spray mist) * Side underrun protection * Extended offset by 500 mm forward * Front extension of the turntable platform by 520 mm with 45° corners, 3 recessed storage compartments incl. covers and lockable * Chassis made of high-tensile fine-grained steel * Floor over turntable platform made of 50 mm and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo * Each side with 4 stake pockets (no stakes included), each with 2 t lashing point * Cargo securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, front and rear on each side 1 pair of 13.4 t lashing rings on the outer frame, and each side 4 pairs of 10 t lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings in the excavator arm support, 8 pairs of galvanized fold-out markers for 3 m total width (not in the rear slope) * Widening planks stored left side in a storage compartment * Excavator arm support above the rear axle to the end of the access slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift on sliding tube from ramp axle * Load area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm access slope) * Chassis, turntable, loading ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and slewing ring painted black * New vehicle with manufacturer's warranty Rsdpfx Asl Th Evodvjt * Errors and prior sale reserved * Available from week 21 / 2026

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at the rear * Pressure gauge display for axle load determination (separate for two air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at the front and rear * FRP front mudguards, straight hot-dip galvanized steel skirts at the rear, each with spray protection * Reflective contour tape at side and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 2 x 7-pin electrical connectors * Four stake pockets per side, each with simultaneous 2 t lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and folding lashing rings, loadable in all directions and integrated in the outer frame – in the corners 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in the rear incline) * Extension planks stored in the center of the loading area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) laterally adjustable * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tanks etc. painted black Rsdpjl Tpwyjfx Advst * Tyres: 235/75 R 17.5 * Payload approx. 24,000 kg at a gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 500 kg, celková hmotnosť: 11 990 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Výbava: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes, 2 x 7 t. Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * 15-pin power connector * Multi-chamber tail lamps * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted right side * Plastic quarter mudguards Rsdpeq Hg D Hsfx Advot * Hot-dip galvanized chassis * Steel pallet – three-way tipper body * Continuous white-painted side walls with upper internal tubular reinforcement, drop-down, without central posts, with side wall spring lifter * Drop-down tailgate, optionally swinging, with manual central locking * Hot-dip galvanized, bolted rear stanchions * Each corner fitted with 1 x 5 t lashing ring; each side with 4 x 3 t lashing eyes recessed into outer frame * 4 mm fine-grain steel floor plate * Net hooks * Rear mounting rail for drive-on ramps * Removable steel extensions, 500 mm high, three-way swinging * Body reinforced, with load securing certificate according to EN 12642 XL * 1 pair of aluminium drive-on ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable rear storage compartment, recessed below the loading platform in the chassis * Axles, springs, air tanks, and landing gear painted in black * Tyres 285/70 R 19.5 * Side wall body colour RAL 9010 pure white * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex stock Egestorf at the A7

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem balance unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm displacement via headplate) with elevated gantry for connection lines * 12 V 7 + 4-pin electrical wiring * 12 / 24 V LED lighting system with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle, no installation required on the towing side * Side marker lights with indicator operation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Chassis made of fine-grain steel * Steel platform - 3-way tipper body with M-Strong side panels (fixed front wall, continuous side walls - without central posts - pendulum-mounted via manual central locking and mechanically foldable with side panel spring lifter * Hydraulic tailgate, 500 mm high, as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 t lashing rings in each corner, as well as 4 x 3 t on each side, recessed and foldable * Hot-dip galvanized two-step access in front of the front wall (driver's side left) * 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receptacle shafts for aluminum loading ramps, recessed into the rear of the chassis, load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Superstructure painted in RAL 9010 pure white * Chassis, drawbar, rear drop-down supports, underride guard hot-dip galvanized * Axles, air tank, front support winch * K80 coupling painted in black * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available from Egestorf Rsdpfx Aer Dpzujdvjt

Stav: nový, maximálna hmotnosť nákladu: 8 450 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 22 420 mm, výška ložného priestoru: 1 500 mm, Rok výroby: 2024, * KA-TA-R 11,9 Masterline: * incl. 1 m mesh side extensions * EBS braking system * Emergency release device for spring brake cylinders * TPMS (Tire Pressure Monitoring System) * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizer unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 rear mechanical hot-dip galvanized folding supports * Right-hand side galvanized steel toolbox * 15-pin electrical connector * Bolted underrun guard with LED tail lights * Plastic quarter mudguards * Mesh hooks on sides and rear in the central locking housing, plus 3 on the front wall * Hot-dip galvanized chassis * Fully galvanized steel 3-way tipper body * Continuous side walls without central stanchion, foldable, with spring-assisted drop sides * Rear tailgate foldable and swinging via manual central locking Rjdpfsp Ncl Sex Advst * Hot-dip galvanized bolted rear stanchion * 1 x 5 t recessed and foldable lashing point at each corner, plus 4 x 3 t on each side * Lashing rings set into the outer frame, foldable * 4 mm steel floor plate * Rear ramp mounting track * Body reinforced with load securing certificate per EN 12642 XL * 1 pair aluminium loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable rear storage compartment beneath the load bed, integrated into the chassis * Tyres: 235/75 R 17.5 * Axles, springs, air tanks, drawbar and landing gear painted black * Side wall body colour hot-dip galvanized * 1 meter galvanized mesh side extensions * Sample images * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex stock Egestorf, A7

Stav: nový, maximálna hmotnosť nákladu: 10 700 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 1 500 mm, Výbava: ABS, * KA-TA-R 14.4: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalization unit * Height-adjustable hot-dip galvanized drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical hot-dip galvanized folding supports * 15-pin electrical connector * Multi-chamber rear lights * Hot-dip galvanized bolted underrun protection * Side toolbox made of galvanized sheet steel, right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous, fold-down white painted side walls with internal tube reinforcement, without central stanchions, with sideboard spring lifters Rodpfx Asp Ncmaedvet * Tailgate can be folded down or used as a swinging gate via manual central locking * Rear pillars bolted and hot-dip galvanized * Each corner with one 5 t lashing point, plus four 3 t lashing rings recessed into each side frame * 4 mm fine-grained steel floor plate * Net hooks, rear mounting rail for loading ramps * Prepared for later installation of side wall extensions * Reinforced body with load securing certificate to EN 12642 XL * 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed in chassis under the loading area * Axles, springs, air tanks, and landing gear painted in black shade * Side wall body color: RAL 9010 pure white * 1 meter galvanized mesh extension * Tires: 285/70 R 19.5 * Sample images * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf, near the A7

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2024, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at the rear * Manometer pressure gauge for load weight determination (axle-specific, on two air suspension circuits) * Side underrun protection Rodpfxel Tq Euo Advet * Swiveling supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards; rear axle with straight galvanized steel skirts, both with spray guards * Reflective contour tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED rear lights * Detachable beacon at the rear * Towing drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 2 x 7-pin electrical sockets * Four stanchion pockets per side, each with simultaneous 2-ton lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV folding and lowering lashing rings, loadable in all directions and recessed into the outer frame — 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3-meter overall width (except at the rear chamfer) * Widening planks stored in the center of the loading area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Load area above the kingpin: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, towing drawbar, folding widenings, and loading ramps hot-dip galvanized * Axles, turntable, air tanks, etc., painted in a black tone * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg GVW * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS/EBS, with 40 km/h approval * Spring-loaded parking brake, drum brakes Rsdpfx Ador Dpz Hevst * Gigant axles * Tandem equalizing unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball head coupling ring (offset by +77 mm / 33 mm via the head plate), with elevated tower for the connection lines * 12 V, 7 + 4-pin power cable * LED lighting system 12/24 V with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle without on-vehicle installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Chassis made of high-tensile steel * Steel three-way tipper body with M-Strong sidewalls (fixed front wall, continuous side walls – without center stanchions – pendulum-mounted via manual central locking and mechanically foldable with sideboard spring lift * Hydraulic tailgate 500 mm high, serves as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * One recessed and foldable lashing ring (7 t) in each corner; 4 recessed and foldable side lashing rings (3 t each) * Hot-dip galvanized two-step access ladder in front of the front wall (on the left) * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 storage compartments for aluminum ramps, integrated from the rear in the chassis; load securing in accordance with EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Body paintwork in RAL 9010 pure white * Chassis, drawbar, rear supports, underrun protection hot-dip galvanized * Axles, air tanks, front support winch * K80 coupling painted in black * New vehicle with manufacturer's warranty * Errors and interim sale subject to change * Immediately available ex Egestorf

Stav: použitý, konfigurácia náprav: 2 nápravy, objem nakladacieho priestoru: 10 m³, celková dĺžka: 7 500 mm, celková šírka: 2 550 mm, celková výška: 4 000 mm, Rok výroby: 2012, Aplikačný materiál: Betón Hrubá hmotnosť: 6.530 kg Užitočné zaťaženie: 25.470 kg CELKOVÁ HMOTNOSŤ: 32.000 kg Redpfxex Utq Ss Advst

Stav: použitý, maximálna hmotnosť nákladu: 29 850 kg, celková hmotnosť: 32 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2012, ďalšia kontrola (TÜV): 05/2028, Rok výroby: 2012, Interné číslo vozidla: G300402 Nemecké vozidlo Ihneď k dispozícii v našom areáli v Kaufungen - Kassel, Nemecko Viac INFO u Luis Lucena Rok výroby 2012 Prázdna hmotnosť návesu: 6 530 kg Miešač na betónový náves LIEBHERR 10 m³ Zmeny a omyly vyhradené Rsdpfx Adoxy Ul Ssvst Radi prijmeme vaše ojazdené vozidlo na protiúčet. Financovanie priamo u nás v spoločnosti možné. GOLEC NUTZFAHRZEUGE GMBH Hovoríme: nemecky, anglicky, španielsky, poľsky, ukrajinsky, rusky, bulharsky.

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brake System: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye Rjdpsxglibjfx Advot ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally on the front right bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Steel rear wall can be inserted between ramps – storage bracket provided internally in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t drop lashing rings every 600 mm * Each corner front and rear fitted with 1 x 6.3 t lashing ring * Various bore holes in the front and rear beam for 1.2 t lashing options ----Ramps: * Single-section mechanical grating drive-on ramps with spring system for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Drop-side color RAL 9010 pure white * Side walls can be painted in any RAL color at extra cost ----Information: * Reinforced and certified superstructure in accordance with EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brake System: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally on the front right bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Steel rear wall can be inserted between ramps – storage bracket provided internally in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t drop lashing rings every 600 mm * Each corner front and rear fitted with 1 x 6.3 t lashing ring * Various bore holes in the front and rear beam for 1.2 t lashing options ----Ramps: * Single-section mechanical grating drive-on ramps with spring system for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) Rsdpfx Adjxglh Revot * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Drop-side color RAL 9010 pure white * Side walls can be painted in any RAL color at extra cost ----Information: * Reinforced and certified superstructure in accordance with EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) Rjdpeykx Nkofx Advjt * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis Redpfx Adoykx Nqjvjt * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: nový, maximálna hmotnosť nákladu: 16 750 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering function * Mounting brackets in front of the bulkhead and rear slope, provision for subsequent installation of container locks for transport of 20" containers * Drawbar with 50 mm flange draw eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * Version 21 t GVW with reinforced frame and axles * Reinforcement package for drill rig transport on chassis * 50 mm softwood floor, clamped design * Mounting points in front of the bulkhead for container locks retrofit * Bolt-on bulkhead made of flat sheet metal * Split side walls of steel sheet, trapezoidal profile, folding with centre folding stake * Rear wall of steel, sliding between the ramps (bracket for storage in the front when not in use) * Bolt-on rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for 3 t drop lashing rings every 600 mm * Profifix lashing rail in the longitudinal axis, centre, for lashing up to LC 3000 daN * One 10 t lashing ring in each corner front and rear * Lashing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes in the front and rear crossmembers for 1.2 t lashing capacity * One-piece mechanical grating ramps with spring mechanism for single-operator use, approx. 3,000 x 620 mm (collapsible down to 20 mm) * Rear approach ramp approx. 860 mm chassis * Drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in black Rodpfx Ajl Tihxodvst * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall paint color can be freely chosen up to approx. 2 weeks before production, but no metallic or special colors * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 29 / 2026

Stav: použitý, maximálna hmotnosť nákladu: 7 100 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2007, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 1 100 mm, celková šírka: 2 550 mm, Vozidlo / Nadstavba: Tandemový trojstranný sklápací vozík Prvá registrácia: 07/07 Celková hmotnosť: 10.000 kg Prevádzková hmotnosť: 2.900 kg Užitočné zaťaženie: 7.100 kg Celková dĺžka: 6.900 mm Dĺžka ložnej plochy: 5.000 mm Šírka: 2.550 mm / Šírka ložnej plochy cca 2.450 mm Výška ložnej plochy: cca 1.100 mm Ďalšie informácie - 40 km/h - 500 mm bočnice - 500 mm pozinkovaný predný nadstavec - 7 párov kotviacich ok na ložnej ploche - 4 páry kotviacich ok pod nadstavbou zvonka - Podperná noha Rjdpfx Asyz H Azsdvst - Zadná podpera - Pružina na zdvíhanie bočnice - Nástupné rampy voliteľné za 1.280,00 €

Stav: použitý, maximálna hmotnosť nákladu: 7 000 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/1999, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 1 100 mm, celková šírka: 2 550 mm, Celková hmotnosť: 10.000 kg Prázdna hmotnosť: 2.000 kg Užitočné zaťaženie: 7.000 kg Celková dĺžka: 6.900 mm Dĺžka ložnej plochy: 5.000 mm Šírka: 2.550 mm / Šírka ložnej plochy cca 2.450 mm Výška ložnej plochy: cca 1.100 mm Ďalšie informácie - 40 km/h - Bočnice 500 mm - 500 mm galvanizovaný čelný nadstavec - 8 párov kotviacich ok na ložnej ploche - 4 páry kotviacich ok pod nadstavbou zvonka Rsdpfxsyz H A Io Advet - Nápravy BPW - Podperná noha - Pružina na zdvíhanie bočnice - Nájazdové rampy voliteľné 1.280,00 €

Stav: použitý, pohotovostná hmotnosť: 8 800 kg, maximálna hmotnosť nákladu: 31 200 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/1996, dĺžka ložného priestoru: 10 000 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 1 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 4 nápravy, otočný záves, listové odpruženie, rozšíriteľný na 3 m, upevňovacie oká, dvojdielne najazdové rampy, hydraulické rampy, zadná podpera, bočná hliníková ochrana, dvojmontáž pneumatík, úložný box. Nadstavba: 4-nápravový nízkoložný príves s hydraulickými dvojdielnymi rampami. Nakladacia výška cca 900 mm. 4x 10t náprava SAF, bubnové brzdy, ťažné oko 40 a 50 mm! Dĺžka horného plošiny cca 2900 mm! Dĺžka dolného plošiny cca 7100 mm! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a omyly vyhradené! Redpjywvhrjfx Advst

Stav: použitý, konfigurácia náprav: 2 nápravy, Rok výroby: 2002, Sklápací nízkozdvižná kombinácia. Povolená celková hmotnosť 10 500 kg, užitočná nosnosť 7 550 kg. Trojstranná sklápacia nadstavba, vnútorné rozmery cca 5 000 x 2 420 x 400 mm, 4 úchytné oká, kývavé a sklopné oceľové bočnice so centrálnym uzamykaním. 1 pár hliníkových nájazdových rámp v uzamykateľných priehradkách pod sklápacou časťou. Nakladacia výška bez záťaže cca 900 mm. Predná dvojrýchlostná oporná noha, sklopné podpery vzadu. Oje 40 mm, ťažná tyč plynulo výškovo nastaviteľná. Dvojokruhový vzduch, jedno-okruhová hydraulika, 24 V. Nápravy BPW, parabolické pruženie, ABS. Pneumatiky 235-75R17.5. Podvozok sivý, sklápacia nadstavba zelená. TK platná do júna 2026. Predaj v aktuálnom stave. Hliníkové rampy = Ďalšie informácie = Prevádzková hmotnosť: 2 950 kg Užitočná nosnosť: 7 550 kg Povolená celková hmotnosť: 10 500 kg Pneumatiky vpredu: 235-75R17.5 Pneumatiky vzadu: 235-75R17.5 Krajina výroby: DE Pre viac informácií kontaktujte Jana-Marca Schwickerta. Redpfsyw Hw Rsx Advjt

Stav: použitý, maximálna hmotnosť nákladu: 17 500 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2005, ďalšia kontrola (TÜV): 01/2027, šírka ložného priestoru: 2 500 mm, ? Hydraulické rampy ? Rozšíriteľné Rjdoytz Hwopfx Advot ? 8 upevňovacích ôk na každej strane ? Držiak na rezervné koleso ? Nakladacia výška: cca 930 mm ? Bubnová brzda ? Duomatické pripojenie ? Listové pruženie ? Dvojmontáž pneumatík Všetky údaje sú bez záruky / Medzipredaj vyhradený.

Stav: nový, maximálna hmotnosť nákladu: 13 410 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 995 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 900 mm, objem nakladacieho priestoru: 11 m³, Rok výroby: 2026, * Wabco EBS-E (elektronický brzdový systém s RSS) * Núdzové uvoľnenie pre pružinové brzdové valce * Bubnové brzdy * Systém monitorovania tlaku v pneumatikách s možnosťou zobrazenia na displeji nákladného vozidla prostredníctvom EBS signálu – bez montáže na strane vozidla – * 2 x 9 t Gigant nápravy * Vzduchové odpruženie s kontrolou výšky počas sklápania * Ťažné oko s 50 mm prírubou (posuvné o +77 mm a -33 mm prostredníctvom odsadzovacej dosky) * Jost podperná podpera vpredu * Sklopný pozinkovaný oceľový podbehový ochranný kryt pre zásobovanie finišérom * Uzavreté plastové jednostranné blatníky * Stojacia plošina pri čelnej stene * Mechanická rolovacia plachta * 15-pólová elektrická zásuvka * LED koncové svetlá s pozinkovanou ochrannou strieškou * Podvozok z jemnozrnnej ocele * Oceľová trojstranná korba (bočné steny s MM profilom – priebežné bez stredného stĺpika – výkyvné cez manuálne centrálne zamykanie, ľavá strana sklopná s pružinovým zdvihákom) * Rolovacia plachta podobná RAL 7038 achátovo sivá s napínaním pomocou račňových napínačov po stranách a elastickými lanami vpredu a vzadu * Čelná plošina z roštového plechu so stupňom na ťažnom ramení a držadlom na čelnej stene * Zadná stena z HBW 400 ocele – výkyvná cez automatické dvojité pazúrové uzáverie * 5 mm oceľová podlaha z HBW 450 ocele * Po stranách po 4x 3 t zápustné a sklopné upevňovacie oká, zabudované v oceľovej podlahe Rjdpfx Adexl Nkgsvot * Zosilnená a certifikovaná nástavba podľa EN 12642 XL vrátane certifikátu zabezpečenia nákladu do 19 t * Sklápacia plošina a bočné steny v RAL 9010 čisto bielej * Lakovanie bočných stien v dohodnutom farebnom odtieni RAL za príplatok možné * Podvozok lakovaný v RAL 9011 grafitovo čiernej * Nové vozidlo s plnou výrobcom poskytnutou zárukou * Zmena údajov a predaj vyhradený * Ihneď k dispozícii v Egestorfe

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, ETÜ-TA-R 14,4 ----Brzda: * EBS – elektronický brzdový systém * Nouzové odjištění pružinových brzdových válců * Bubnové brzdy ----Nápravy: * 2 × 7 t nápravy Gigant ----Odpružení: * Vzduchové odpružení ----Tažná oj / přípojný čep: * Tažná oj výškově stavitelná v rozsahu 300 mm * Prodloužení oje o 250 mm na celkovou délku 2 250 mm * 40mm přípojný čep s přírubou ----Osvětlení / elektroinstalace: * RDÜ (monitoring tlaku v pneumatikách) * LED koncová světla 12 / 24 V * 15pinová elektrická zásuvka ----Obecná přídavná výbava: * Opěrná noha Jost vpředu * Vnější žárově zinkované sklopné podpěry vzadu * Plastová skříň na nářadí vpředu vpravo zvenčí na přední stěně * Boční ochrana proti najetí * Plastové čtvrt-blatníky ----Plošina plošinového přívěsu: * 50mm podlaha z jehličnatého dřeva * Příprava před čelní stěnou pro dodatečnou montáž kontejnerových uzávěrů * Šroubovaná čelní stěna z hladkého plechu * Boční stěny ze stěnového ocelového plechu – trapézový profil – sklopné s pružinovým mechanismem * Zadní stěna z oceli, zasouvací mezi rampové držáky a při nepoužívání uložitelná uvnitř před čelem * Zadní sloupky šroubované * Nájezdová hrana vzadu cca 860 mm ----Zajištění nákladu: * Perforovaný vnější rám ohnutý cca 45° s vázací silou 2 t každých 480 mm * Možnost instalace sklopných vázacích třmenů s vázací silou 3 t každých 600 mm * V předních a zadních rozích vždy 1× vázací oko s nosností 6,3 t * V čelní a koncové příčce různé otvory pro vázání 1,2 t ----RAMPY: * Jednodílné mechanické nájezdové rampy z roštového materiálu s pružinovým mechanismem pro obsluhu jednou osobou cca 2 750 × 600 mm (stlačitelné na šířku 20 mm) ----Nátěr: * Podvozek, tažná oj, čelní stěna, zadní stěna, zadní část i nájezdové rampy žárově zinkované * Barva bočních stěn v odstínu RAL 9010 čistě bílá * Nástřik bočních stěn v jiném odstínu RAL možný za příplatek ----Informace: * – Zesílená a certifikovaná nástavba dle EN 12642 XL včetně certifikátu zajištění nákladu – Redpfx Adoq Dyvysvot * Nové vozidlo s garancí výrobce * Změny a předchozí prodej vyhrazeny ----Dodací lhůta: * K dispozici ihned, odběr v Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 10 900 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, ETÜ-TA-R 14.4 ----Brzda: Rjdpfx Aspk Dv Rsdvot * EBS – elektronický brzdový systém * Nouzové uvolňovací zařízení pro pružinové válce * Bubnové brzdy ----Nápravy: * 2 x 7 t nápravy Gigant ----Odpružení: * Vzduchové odpružení ----Tažná oj / tažné oko s přírubou: * výškově stavitelná tažná oj (nastavitelná o 300 mm) * prodloužení oje o 250 mm na celkovou délku 2 250 mm * 40mm tažné oko s přírubou ----Osvětlení / Elektrická výbava: * RDÜ (monitorování tlaku v pneumatikách) * LED koncová světla 12 / 24 V * 15-pólová elektrická zástrčka ----Obecné přídavné prvky: * Podpěrná noha Jost vpředu * Vnější žárově zinkované sklopné podpěry vzadu * Plastová schránka na nářadí vpravo vpředu na čele korby * Boční nárazová ochrana * Plastové čtvrt blatníky ----Ložná plocha návěsu: * 50mm podlaha ze smrkového masivu * Před čelní stěnou příprava na dodatečnou montáž uzávěrů kontejneru * Šroubovaná přední stěna z hladkého plechu * Sklopné bočnice z trapézového ocelového plechu s pomocnými pružinami * Zadní stěna z ocelového plechu zasouvatelná mezi držáky nájezdových ramp, při nepoužívání uložená vnitřně před čelní stěnou * Zadní sloupky šroubované * Zadní nájezd cca 860 mm ----Zajištění nákladu: * Děrovaný vnější rám, ohnutý cca 45°, zajišťovací síla 2 t každých 480 mm * Možnost instalace výklopných ok s nosností 3 t každých 600 mm * V každém rohu vpředu a vzadu 1x zajišťovací oko s nosností 6,3 t * V předním a zadním příčníku různé otvory pro zajišťovací možnosti s nosností 1,2 t ----RAMPY: * Jednodílné mechanické nájezdové rampy z roštového plechu s pomocnou pružinou pro ovládání jedním člověkem, rozměry cca 2 750 x 600 mm (ve shrnutém stavu až na 20 mm) ----Nátěr: * Žárově zinkovaný rám vozidla i oje, čelní stěna, zadní stěna, zadní čelo a nájezdové rampy * Boční stěny standardně v barvě RAL 9010 (čistě bílá) * Na přání lakování bočnic do jiné barvy RAL za příplatek ----Informace: * --Zesílená a certifikovaná konstrukce dle EN 12642 XL včetně certifikátu o zajištění nákladu-- * Nové vozidlo s plnou zárukou výrobce * Chyby a mezitímní prodej vyhrazeny ----Doba dodání: * K okamžitému odběru v Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear Rodpfx Aoq Euakedvot * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: Rsdpfx Astpta Djdvot ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27