Low loader trailer

SCHWARZMÜLLER 4-A SAF hydr.RampenBaggermuldeSpritzverzinktNEU!

WhatsApp:
SCHWARZMÜLLER NEW VEHICLE
4-AXLE LOW LOADER WITH CURVED PLATFORM
GVWR (permissible) 24 t
GVWR (technical) 40 t
Payload 8,200 kg
Dimensions
approx. 2,800 mm = raised platform at the front incl. frame curvature, corners chamfered
approx. 5,350 mm = low-bed platform - loading area
approx. 850 mm = rear access ramp
Overall width approx. 2,550 mm (with wideners approx. 3,000 mm)
Loading height when loaded approx. 870 mm
Frame
Steel welded construction with front frame curvature and chamfer at the rear
Access ramp with excavator bucket recess in the center = recess at the rear between the longitudinal beams, approx. 2,300 mm long.
Integrated in the outer frame: 5 pairs of 4t lashing points (4 x in the low-bed and 1 x on the raised platform)
8 pairs of recessed, extendable 10t lashing rings (5 x in the low-bed, 1 x in the access ramp and 2 x on the raised platform)
Standard ball race swivel coupling
Frame attachments
extendable wideners, 50 mm
4 pairs of foldable 10t lashing rings, arrangement:
1 pair at the front on the raised platform, inside the longitudinal beams
* 1 pair at the very rear in the excavator bucket recess, left and right
* 1 pair at the front on the raised platform in front of the curvature, inside the longitudinal beams
* 1 pair in the low-bed at the rear in front of the access ramp, in the excavator bucket recess, left and right
Coupling device
Fixed drawbar with 50 mm heavy-duty coupling pin, 5 degrees inclined, rubber bearing, drawbar retaining spring with tensioner
Truck coupling height 820 mm to 1,000 mm
Drawbar length 1,700 mm
2 automatic folding supports at the rear
Axles
SAF air suspension low loader axles with drum brakes, load capacity 11 t/axle,
S-cam brake 300/200 mm, automatic brake linkage adjuster
Wheels
16 tires 245/70 R 17.5, 141J
16 steel rims 6.75 x 17.5, with offset, silver
Braking system/Suspension
Braking system according to ECE regulations R13
Two-line pneumatic braking system
Braking system manufacturer Wabco
EBS system 4S3M, 1st + 3rd axle sensed
Spring brake parking brake on 3rd + 4th axle
Steel air tank
Brake/air connection lines with 2 individual coupling heads yellow/red
EBS/ABS connection cable
Rubber band as holder for EBS and electrical plug
Floor
Dcsdpfe Aibxhox Akiep
Softwood floor 50 mm impregnated, protruding approx. 5 - 10 mm above the frame top edge
Steel checkered plate covering over rear wheels
Without front/side walls
Ramps
2 foldable, 1-piece steel access ramps, length approx. 2,800 mm, width approx. 800 mm,
with hardwood floor 50 mm impregnated
Ramps can be shifted in width (intermediate distance approx. 250 mm to max. GB 3,000 mm)
Ramps lockable, by chains with tensioner
Hydraulic ramp lifting mechanism via existing 2-hose truck connection
Control in stainless steel box, ramps can be manually shifted laterally with a rod
Lighting/Electrical system
24-volt lighting system according to ECE regulations R48
2 full-LED five-chamber rear lights "MultiLED III" on ramps
2 LED position lights at the front
2 LED outline lights at the rear
Flashing LED side marker lights, via turn signal
2 LED license plate lights
Fixed connection cable 1 x 15-pole plug
1 attachable LED rotating beacon (mount at the rear)
Painting
Steel granulate cleaning, shot blasting, multi-layer epoxy zinc phosphate primer and
Sprayed with 2-component topcoat
Chassis = RAL 7021 Black-grey
Outer frame/end plate = RAL 7021 Black-grey
Access ramps = hot-dip galvanized, unpainted
Drawbar and swivel coupling =

Inzerát bol automaticky preložený. Chyby v preklade sú možné.