Trojsmerný sklápačský príves

HUMBAUR HTK3000.31 Alu

Stav: nový, pohotovostná hmotnosť: 870 kg, maximálna hmotnosť nákladu: 2 130 kg, celková hmotnosť: 3 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 3 140 mm, šírka ložného priestoru: 1 750 mm, výška ložného priestoru: 350 mm, objem nakladacieho priestoru: 2,2 m³, farba: iný, stavebná výška: 1 260 mm, pracovná šírka: 1 930 mm, Manufacturer: Humbaur Model: 3-way tipper HTK Alu 3000.31 Permissible total weight: 3,000 kg Payload: 2,130 kg Unladen weight: 870 kg Load bed dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 750 mm Load platform hydraulically tiltable via hand pump and electric pump Tipping angle: rear 42°, lateral 50° - V-drawbar, hot-dip galvanized (immersion bath) - Chassis and tipping bridge hot-dip galvanized (immersion bath) - One-piece steel tipping bridge construction - 4-stage hard chrome tipping cylinder - Hand pump; from 3,000 kg permissible total weight electric pump with hand pump - 13-pin connector and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear gate with swivel function - 6 lashing rings mounted on deck, tensile force 800 kg per ring, Dekra tested - Support wheel - Channel prepared for the retrofitting of aluminium ramps Price includes vehicle registration certificate (Part II and COC papers) Rodpfx Amjrq Ew To Hech We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we provide free temporary registration plates. We repair trailers from all manufacturers. Further accessories available on request. Technical specifications, prices, and errors subject to change. No liability for errors or misprints. Features: auto-reverse braking, rubber torsion axle, independent suspension, tilting load bed, support wheel, clearance lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard chrome tipping cylinder, hand pump, from 3,000 kg total weight electric pump with hand pump, 13-pin connector and reversing lights, removable 350 mm high aluminium side panels, rear swing tailgate, 6 lashing rings (800 kg tensile force each, Dekra certified) mounted on deck, preparation for easy retrofitting of aluminium ramps.

Stav: použitý, pohotovostná hmotnosť: 907 kg, maximálna hmotnosť nákladu: 2 130 kg, celková hmotnosť: 3 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2023, ďalšia kontrola (TÜV): 08/2026, dĺžka ložného priestoru: 3 140 mm, šírka ložného priestoru: 1 750 mm, výška ložného priestoru: 350 mm, objem nakladacieho priestoru: 2,2 m³, farba: iný, stavebná výška: 1 260 mm, pracovná šírka: 1 930 mm, Výbava: záruka na ojazdené vozidlá, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible Total Weight: 3,000 kg Payload: 2,130 kg Rjdpfx Amoxyulfs Hech Unladen Weight: 870 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle: rear 42°, side 50° With mesh extension (leaf grille or steel mesh extension), 600 mm high, foldable on all 4 sides Including aluminium loading ramps and 2 support legs The trailer was repurchased due to business closure. It is in like-new condition and has only been used about 3 times. - V-drawbar, hot-dip galvanised - Chassis and tipping bridge hot-dip galvanised - Tipping bridge made from a single piece of steel - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg permissible total weight with electric pump and hand pump - 13-pin connector and reversing lights - Drop sides made of aluminium, 350 mm high, fully removable - Rear tailgate is pendulum mounted - 6 lashing rings installed in the bed, each with a lashing capacity of 800 kg, Dekra certified - Jockey wheel - Channel ready for aluminium planks, can be easily upgraded Price includes vehicle registration papers (Part II registration document and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Upon request, we provide free temporary number plates for transfer. We repair trailers of all brands. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability for errors or misprints. Features: automatic reversing system, rubber suspension axle, independent wheel suspension, tiltable load area, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanised, braked, V-drawbar hot-dip galvanised, single-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, electric pump with hand pump from 3,000 kg, 13-pin connector and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear tailgate, 6 lashing rings mounted in the bed (each tested for a load capacity of 800 kg, Dekra certified), chassis channel ready for the easy retrofitting of aluminium planks.

Stav: nový, pohotovostná hmotnosť: 907 kg, maximálna hmotnosť nákladu: 2 130 kg, celková hmotnosť: 3 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 3 140 mm, šírka ložného priestoru: 1 750 mm, výška ložného priestoru: 350 mm, objem nakladacieho priestoru: 2,2 m³, farba: iný, stavebná výška: 1 260 mm, pracovná šírka: 1 930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Gross Vehicle Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Body Dimensions: 3,140 x 1,750 x 350 mm Rodpfxoktm Sus Am Hjch Tyres: 13 inch Loading Height: 750 mm Loading platform hydraulically tipper with manual and electric pump Tipping angle: rear 42°, lateral 50° With mesh extension/steel mesh extension, 600 mm high, swingable on all four sides - V-drawbar, hot-dip galvanised - Chassis and tipping bridge, hot-dip galvanised - Tipping bridge made from a single piece of steel - 4-stage hard-chromed tipping cylinder - Manual pump, from 3,000 kg gross vehicle weight with additional electric pump - 13-pin plug and reversing lights - Drop sides made from aluminium, 350 mm high, completely removable - Rear panel is swingable - 6 lashing rings mounted on the platform floor, lashing force 800 kg per ring, DEKRA tested - Jockey wheel - Channel prepared for aluminium ramps for easy retrofit Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we offer a complimentary temporary licence plate for transport. We repair trailers of all manufacturers. Further accessories upon request. Technical changes, price changes, and errors excepted. No liability for mistakes or printing errors. Features: Auto-reverse brake, rubber spring axle, independent suspension, tipping platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanised, braked, including warranty, V-drawbar hot-dip galvanised, tipping bridge made from a single piece of steel, 4-stage hard-chromed tipping cylinder, manual pump, additional electric pump from 3,000 kg GVW, 13-pin plug and reversing lights, drop sides aluminium, 350 mm high, completely removable, rear panel swingable, 6 lashing rings on platform floor, lashing force 800 kg per ring, DEKRA tested, channel prepared for aluminium ramps for easy retrofit.

Stav: nový, pohotovostná hmotnosť: 907 kg, maximálna hmotnosť nákladu: 2 130 kg, celková hmotnosť: 3 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 3 140 mm, šírka ložného priestoru: 1 750 mm, výška ložného priestoru: 350 mm, objem nakladacieho priestoru: 2,2 m³, farba: iný, stavebná výška: 1 260 mm, pracovná šírka: 1 930 mm, Manufacturer: Humbaur Model: 3-way tipper HTK Alu 3000.31 Permissible total weight: 3,000 kg Payload: 2,130 kg Unladen weight: 870 kg Bed dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading height: 750 mm Loading area hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, sides: 50° With 600 mm high sheet metal side extensions, 4-way pendulum system Incl. flat tarpaulin - V-drawbar, hot-dip galvanised - Chassis and tipping body, hot-dip galvanised in immersion bath Rcsdoyw Ez Uopfx Am Hjh - Tipping body made of one-piece steel construction - 4-stage hard-chrome tipping cylinder - Hand pump; from 3,000 kg permissible total weight, electric pump with hand pump - 13-pin plug and reversing light - Aluminium side panels, 350 mm high, fully removable - Rear flap pendulum-mounted - 6 lashing rings on load bed, pull strength 800 kg each, Dekra-certified - Jockey wheel - Stake pockets pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration certificate (registration certificate part II and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we offer free temporary license plates. We repair trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for errors or misprints. Auto-reverse brakes, rubber suspension axle, independent suspension, tilting load area, jockey wheel, marker lights, hot-dip galvanised chassis and tipper body, braked, with warranty, V-drawbar hot-dip galvanised, tipping bridge from one-piece steel construction, 4-stage hard-chrome tipper cylinder, hand pump, electric pump with hand pump from 3,000 kg permissible gross weight, 13-pin plug and reversing lights, 350 mm high aluminium side panels, fully removable, pendulum rear flap, 6 lashing rings on the bed, each with 800 kg pull strength, Dekra-tested, stake pockets pre-installed for easy retrofitting of aluminium ramps.