Mobilný žeriav

Liebherr LTR1100 Diesel, 100t Capacity, 52m Main Boom, Runn

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon Hedpoh Etf Refx Ablen - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: veľmi dobrý (použitý), typ paliva: nafta, farba: žltá, zdvíhacia výška: 50 000 mm, prvá registrácia: 06/2018, typ stožiara: teleskopický, Rok výroby: 2018, Technické informace Počet válců: 6 Pohon: Kola Provozní hmotnost: 54 073 kg Hjdpfxjwud Ihj Abljn Funkční Stožár: Teleskopický (5 dílů) Délka stožáru: 50 m Nosnost: 100 000 kg Značka nadstavby: GROVE GRT8100 Stav Technický stav: Velmi dobrý Vizuální stav: Velmi dobrý Finanční informace Cena: Na vyžádání GROVE GRT8100 JEŘÁB DO OBTÍŽNÉHO TERÉNU

Stav: použitý, najazdené kilometre: 129 252 km, zdvíhacia výška: 38 000 mm, Rok výroby: 2015, Určenie: stavebníctvo Pohon: kolesový Pohotovostná hmotnosť: 27 875 kg Nosnosť: 23 800 kg Sériové číslo: 122024 Stav predných pneumatík: 70 % Hjdpfx Abew A Hb Tjlsn Stav zadných pneumatík: 70 % Prepravné rozmery (dĺžka x šírka x výška): 11,1 x 2,55 x 3,9 m Pre viac informácií kontaktujte PFEIFER GROUP.

Stav: nový, maximálna hmotnosť nákladu: 67 200 kg, celková hmotnosť: 85 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from equipment. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. 3,700 mm long, rear tapered approx. 1,000 mm x 10° * For tractors: 6x2, 6x4, and 8x4 short wheelbase * Steel front wall, removable, approx. 400 mm high * 3 kW electro-hydraulic power pack for controlling hydraulic operations, except for hydraulic winches * Outer beams of gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of removable ALU side walls, approx. 400 mm high, anodized * 1 removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck, approx. 40 mm thick hardwood floor; over the king pin, checker plate floor * 3.5-inch king pin * Guide plate from gooseneck for fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. cabling bracket for supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed into the gooseneck for approx. 100 x 50 mm plug-in stakes PLATFORM * Extendable platform, approx. 11,000 mm long, rear tapered approx. 500 mm x 10° Hsdpfx Abergzv Njlen * Pneumatic locking with conical lock bolts and reinforced lock positions; supply lines protected within the extendable rails and automatically adjust to the platform length * BPW axles and suspension, 1st axle steered ahead, 2nd axle fixed, all other axles hydraulic-mechanical forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with two-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Platform with continuous and between the axles interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Long holes for attachable and repositionable bridging elements: – at the fixed section behind the gooseneck – at the front of the platform * 1 sliding intermediate platform, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate floor, front and rear with long holes for attachable and movable bridging elements * 1 pair of recessed flat lashing rings in the fixed front platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, folding outward (LC 10,000 daN) * 1 pair of mechanical rear supports * Steering from front and rear operated via cable remote control, with single-track alignment of the axles, without installation in the tractor * 1st axle with automatic lift-axle function and starting aid in accordance with EU regulation 2021/535 * Under the gooseneck and at the rear cross-member, left and right, each with a 7-pin socket and holder for warning plates * Painted sand coating on the outer frame of the platform as well as on the checker plates and the transition area between the platf

Stav: použitý, najazdené kilometre: 110 160 km, typ paliva: nafta, palivo: nafta, farba: iný, celková dĺžka: 12 970 mm, celková šírka: 2 700 mm, celková výška: 3 820 mm, Rok výroby: 1990, Prázdna hmotnosť: 47 050 kg Poškodenia: žiadne Referenčné číslo: M7 Hodpoyxp Nrofx Ablon

Stav: použitý, najazdené kilometre: 70 275 km, výkon: 390 kW (530,25 k), prvá registrácia: 06/2021, typ paliva: nafta, konfigurácia náprav: 8x8, rázvor náprav: 4 800 mm, palivo: nafta, brzdy: brzdenie motorom, farba: biely, kabína vodiča: spacia kabína, typ prevodu: automatický, emisná trieda: Euro 6, zavesenie: oceľ, dĺžka ložného priestoru: 5 950 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 1 460 mm, Rok výroby: 2021, Výbava: ABS, AdBlue, centrálne zamykanie, elektrické ovládanie okien, klimatizácia, nezávislé kúrenie, prípojné zariadenie, systém kontroly trakcie, tempomat, uzávierka diferenciálu, vyhrievanie sedadla, žeriav, = Ďalšie možnosti a výbava = - Diaľkovo ovládané centrálne zamykanie - Oko na pripojenie prívesu (maulová spojka) - Nábojová redukcia - Vývodový hriadeľ (PTO) - Rádio - Cúvacia kamera - Slnečná clona - Nezávislé kúrenie (vzduchové kúrenie) - Skrinka na náradie = Poznámky = Mercedes-Benz Arocs 3253 8x8 Plne listové odpruženie. 2 sady pneumatík. Cestné: 385/65R22.5 315/80R22.5 Terénne: 14.00R20 Copma 650 .6 Výložník – 6 hydraulických výsuvov. Navijak. Predné oporné nohy. Scanreco rádiové diaľkové ovládanie. Pracovná plošina pre personál. 2,00 m – 27 520 kg 4,30 m – 12 800 kg 5,95 m – 9 070 kg 7,70 m – 6 840 kg 9,55 m – 5 380 kg Hsdpfx Absx S N Hksljn 11,40 m – 4 420 kg 13,50 m – 3 680 kg 15,60 m – 3 160 kg 2x manuálne výsuvy 18,71 m – 1 720 kg 20,11 m – 1 520 kg 21,75 m – 1 240 kg 23,46 m – 1 000 kg 25,19 m – 870 kg 26,96 m – 800 kg 28,76 m – 720 kg 80 cm hydraulický výsuv na ložnej ploche. = Ďalšie informácie = Technické informácie Počet valcov: 6 Konfigurácia náprav Brzdy: bubnové brzdy Odpruženie: listové Predná náprava 1: riadená Predná náprava 2: riadená Hmotnosti Pohotovostná hmotnosť: 24 855 kg Užitočné zaťaženie: 12 145 kg Celková hmotnosť: 37 000 kg Funkčné vybavenie Žeriav: Copma Finančné informácie Cena: na vyžiadanie Identifikácia Kód typového čísla: AROCS 3253 8x8 / 65 t/m ŽERIAV + = Firemné informácie = VŠETKY CENY SÚ BEZ DPH PRE VÝVOZ, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ruski Snažíme sa poskytovať presné informácie, avšak z uverejnených textov nie je možné odvodiť žiadne právne nároky.

Stav: použitý, najazdené kilometre: 278 066 km, Rok výroby: 2009, Pohon: kolesá Vlastná hmotnosť: 72 000 kg Nosnosť: 150 000 kg Rozmery ložného priestoru: 1620 x 285 x 395 cm Sériové číslo: 068506 Hedpfjw D N Raox Ablon Stav pneumatík vpredu: 80 % Stav pneumatík vzadu: 80 % Pre viac informácií kontaktujte PFEIFER GROUP.

Stav: použitý, najazdené kilometre: 41 260 km, výkon: 230 kW (312,71 k), prvá registrácia: 03/1995, typ paliva: nafta, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, farba: zelený, typ prevodu: automatický, Výbava: žeriav, Vehicle Identification Number: W09363000SEL05061 Crane Serial Number: 19211 German machine – Inspection due ---- Crane chassis data: Operating kilometers: 41,260 km – approx. 14,703 h Number of axles: 3 Driven / steered: 6x6x6 Central lubrication system Tyres: 445/95 R 25 ---- Crane superstructure data: Heated cab Telescopic boom / sections: 30 m / 3 Maximum lifting capacity: 40 t Counterweights: 7.1 t Hook block Central lubrication system Operating hours: 11,596 h All information is subject to change, prior sale, and errors. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense. The description stipulated in the purchase contract is decisive. Our offers are generally without new TÜV inspection. If a new TÜV inspection is required, we will gladly provide a quotation from our partner workshops! The vehicle may be labeled or branded with advertisements. Our general terms and conditions of delivery and payment apply. Hodpow Ii Ewofx Ablsn

Stav: použitý, najazdené kilometre: 53 318 km, zdvíhacia výška: 110 000 mm, Rok výroby: 2018, Pohon: kolesový Prevádzková hmotnosť: 60 000 kg Nosnosť: 250 000 kg Rozmery ložného priestoru: 1586 x 299 x 399 cm Sériové číslo: 088666 Stav predných pneumatík: 90 Stav zadných pneumatík: 90 Hodpewz Utzofx Abljn Pre viac informácií kontaktujte spoločnosť PFEIFER GROUP.

Stav: použitý, najazdené kilometre: 45 700 km, Rok výroby: 2005, Pohon: koleso Prevádzková hmotnosť: 36 000 kg Nosnosť: 45 000 kg Rozmery nákladového priestoru: 1150 x 270 x 390 cm Sériové číslo: 53517 Stav pneumatík vpredu: 70 Stav pneumatík vzadu: 70 Hedpoyl Huwsfx Abljn Pre viac informácií kontaktujte PFEIFER GROUP.