Nízky nakladačHumbaur
HBT 106224 BS Basic abgeschrägt
Nízky nakladač
Humbaur
HBT 106224 BS Basic abgeschrägt
Pevná cena plus DPH
20 890 €
(24 859 € brutto)
Stav
Nový
Umiestnenie
Burghaun 

Zobraziť obrázky
Zobraziť mapu
Základné údaje
Cena a lokalita
Pevná cena plus DPH
20 890 €
(24 859 € brutto)
- Umiestnenie:
- Burghaun, Hessen

Zavolať
Technické detaily
- Konfigurácia náprav:
- 2 nápravy
Podrobnosti ponuky
- ID inzerátu:
- A211-20-182
- Referenčné číslo:
- hbt106224-1
- Aktualizácia:
- naposledy dňa 15.02.2026
Popis
Humbaur HBT 106224 BS Basic, tapered design
Technical Data:
- Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm
- Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm
- Permissible total weight: 11,900 kg
- Payload: approx. 9,100 kg
- Wheelbase: 990 mm
- Tyres: 235/75 R17.5 inch
- Loading height: approx. 920 mm
- Drawbar length: approx. 1,800 mm
- Coupling height: approx. 750–1,000 mm
- Ramp angle: approx. 16°
- Plank length: approx. 2,600 mm
- Plank width: approx. 540 mm
- 3 pairs of lashing rings, 3,000 kg per lashing point, recessed into the bed floor
- 7 pairs of lashing rings, 1,000 kg per lashing point, fitted in the outer frame
Standard Equipment:
- Axles from well-known manufacturers
- Low-maintenance parabolic suspension with load compensation
- Tyres as selected by the manufacturer on steel rims
- ABS braking system according to ECE guidelines with ALB function
- ABS connector ISO 7638
- Spindle-type parking brake
- 2 non-interchangeable coupling heads red/yellow ISO 1728
- Drawbar with DIN towing eye Ø 40 mm, galvanized, continuously height-adjustable via crank
- 24V lighting system with multi-chamber rear lights and LED side marker lights
- 15-pin socket for lighting
- Robust, welded and hot-dip galvanized frame
- Rear area tapered, gradient 12°
- Floor covering made of 40 mm softwood planks
- Side walls made of anodized aluminum, foldable and removable
- Galvanized corner stanchions, plug-in front and rear
- 2 foldable, single-piece galvanized steel ramps, laterally adjustable
- Ramp lift: 1 gas strut per ramp
- Ramp securing at rear stanchion
- Ramp surface made of galvanized grating
- Reinforced 12 t gearbox support winch with load and rapid mode
- 2 telescopic folding supports at left and right rear of vehicle
- Steel mudguards with anti-spray mats
Hodpfjyfvg Aex Ag Tefd
- Side underrun protection, foldable up to 1st axle
- 2 wheel chocks with holders
- Side and rear contour markings
- Space for two-line licence plate on left ramp
Upon request, we can offer you a leasing or financing solution.
Mr. Seidel (phone) will be happy to assist you.
For further information, please visit our website.
... Errors, changes and prior sale excepted !!!
= More information =
GVW: 11,900 kg
External dimensions: 0 x 2,550 x 3,260 mm
Please contact Marius Herden for further information.
Inzerát bol automaticky preložený. Chyby v preklade sú možné.
Technical Data:
- Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm
- Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm
- Permissible total weight: 11,900 kg
- Payload: approx. 9,100 kg
- Wheelbase: 990 mm
- Tyres: 235/75 R17.5 inch
- Loading height: approx. 920 mm
- Drawbar length: approx. 1,800 mm
- Coupling height: approx. 750–1,000 mm
- Ramp angle: approx. 16°
- Plank length: approx. 2,600 mm
- Plank width: approx. 540 mm
- 3 pairs of lashing rings, 3,000 kg per lashing point, recessed into the bed floor
- 7 pairs of lashing rings, 1,000 kg per lashing point, fitted in the outer frame
Standard Equipment:
- Axles from well-known manufacturers
- Low-maintenance parabolic suspension with load compensation
- Tyres as selected by the manufacturer on steel rims
- ABS braking system according to ECE guidelines with ALB function
- ABS connector ISO 7638
- Spindle-type parking brake
- 2 non-interchangeable coupling heads red/yellow ISO 1728
- Drawbar with DIN towing eye Ø 40 mm, galvanized, continuously height-adjustable via crank
- 24V lighting system with multi-chamber rear lights and LED side marker lights
- 15-pin socket for lighting
- Robust, welded and hot-dip galvanized frame
- Rear area tapered, gradient 12°
- Floor covering made of 40 mm softwood planks
- Side walls made of anodized aluminum, foldable and removable
- Galvanized corner stanchions, plug-in front and rear
- 2 foldable, single-piece galvanized steel ramps, laterally adjustable
- Ramp lift: 1 gas strut per ramp
- Ramp securing at rear stanchion
- Ramp surface made of galvanized grating
- Reinforced 12 t gearbox support winch with load and rapid mode
- 2 telescopic folding supports at left and right rear of vehicle
- Steel mudguards with anti-spray mats
Hodpfjyfvg Aex Ag Tefd
- Side underrun protection, foldable up to 1st axle
- 2 wheel chocks with holders
- Side and rear contour markings
- Space for two-line licence plate on left ramp
Upon request, we can offer you a leasing or financing solution.
Mr. Seidel (phone) will be happy to assist you.
For further information, please visit our website.
... Errors, changes and prior sale excepted !!!
= More information =
GVW: 11,900 kg
External dimensions: 0 x 2,550 x 3,260 mm
Please contact Marius Herden for further information.
Inzerát bol automaticky preložený. Chyby v preklade sú možné.
Poskytovateľ
Poznámka: Zaregistrujte sa zadarmo alebo sa prihláste, aby ste získali všetky informácie.
Registrovaný od: 2007
680 Inzeráty online
Odoslať dopyt
Telefón & Fax
+49 6652 ... inzercie
Tieto inzeráty by vás mohli tiež zaujímať.
Malý inzerát
Burghaun
750 km
Nízky nakladač
WörmannBauTL105.55/200 Rampen verzinkt
WörmannBauTL105.55/200 Rampen verzinkt
Váš inzerát bol úspešne odstránený
Došlo k chybe






















