Trojsmerný sklápačský príves

MÜLLER-MITTELTAL 11,9 to., verst. Strongwände, Kombi- Heckklappe

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: Nodpfsxf Skpox Afmelk * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 Nledpsxf Sk Ajfx Afmok ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) Nedpfsxf Skvsx Afmjlk ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf