Nízkozdvižný prívesMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Nízkozdvižný príves
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
pevná cena bez DPH
28 500 €
(33 915 € brutto)
Rok výroby
2024
Stav
Nový
Umiestnenie
Egestorf 

Zobraziť obrázky
Zobraziť mapu
Základné údaje
Cena a lokalita
pevná cena bez DPH
28 500 €
(33 915 € brutto)
- Umiestnenie predajcu:
- Eichenstich 12, 21272 Egestorf, Nemecko

Volať
Technické detaily
- Maximálna hmotnosť nákladu:
- 8 620 kg
- Celková hmotnosť:
- 11 900 kg
- Konfigurácia náprav:
- 2 nápravy
- Dĺžka ložného priestoru:
- 5 500 mm
- Šírka ložného priestoru:
- 2 420 mm
- Výška ložného priestoru:
- 500 mm
Podrobnosti ponuky
- ID záznamu:
- A112-18-097
- Referenčné č.:
- 58921
- Naposledy aktualizované:
- dňa 13.01.2026
Popis
* KA-TA-R 11.9:
----Braking system:
* Electronic Braking System (EBS)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
Djdpfxsm Angvs Ag Tscc
* 15-pin electrical connector
* LED tail lights
----General Accessories:
* Jost mechanical landing leg at the front
* Two mechanical, hot-dip galvanized folding supports at the rear
* Galvanized sheet steel toolbox, installed on the right side
* Hot-dip galvanized bolted underrun protection
* Plastic quarter mudguards
----Tipping Platform Body:
* Net hooks mounted laterally and at the rear in the central locking mounts, plus 3 hooks on the front wall
* Hot-dip galvanized chassis
* Steel pallet-wide 3-way tipper body
* Full-length drop sides, no center stanchions, with tailboard spring lifters
* Drop-down and swinging rear flap via manual central locking
* Bolted, hot-dip galvanized rear stanchions
* 4 mm steel floor plate
* Prepared for later retrofitting of side extension boards
* Platform length: 5.5 meters
----Load Securing:
* One 5 t lashing ring in each corner
* Four 3 t recessed lashing rings per side in the outer frame
----Ramps:
* Rear mounting track for drive-on ramps
* One pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment integrated under the loading platform in the chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in a shade of black
* Platform body color: RAL 9010 pure white
* Painting of side walls and tipper body in any RAL color available at extra cost
----Additional information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex works Egestorf, near the A7 motorway
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
----Braking system:
* Electronic Braking System (EBS)
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
Djdpfxsm Angvs Ag Tscc
* 15-pin electrical connector
* LED tail lights
----General Accessories:
* Jost mechanical landing leg at the front
* Two mechanical, hot-dip galvanized folding supports at the rear
* Galvanized sheet steel toolbox, installed on the right side
* Hot-dip galvanized bolted underrun protection
* Plastic quarter mudguards
----Tipping Platform Body:
* Net hooks mounted laterally and at the rear in the central locking mounts, plus 3 hooks on the front wall
* Hot-dip galvanized chassis
* Steel pallet-wide 3-way tipper body
* Full-length drop sides, no center stanchions, with tailboard spring lifters
* Drop-down and swinging rear flap via manual central locking
* Bolted, hot-dip galvanized rear stanchions
* 4 mm steel floor plate
* Prepared for later retrofitting of side extension boards
* Platform length: 5.5 meters
----Load Securing:
* One 5 t lashing ring in each corner
* Four 3 t recessed lashing rings per side in the outer frame
----Ramps:
* Rear mounting track for drive-on ramps
* One pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment integrated under the loading platform in the chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in a shade of black
* Platform body color: RAL 9010 pure white
* Painting of side walls and tipper body in any RAL color available at extra cost
----Additional information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex works Egestorf, near the A7 motorway
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
Poskytovateľ
Poznámka: Zaregistrujte sa zadarmo alebo sa prihláste, aby ste získali všetky informácie.
Registrované od: 2001
Odoslať žiadosť
Telefón & Fax
+49 40 33... inzercie
Tieto inzeráty by vás mohli tiež zaujímať.
Váš inzerát bol úspešne odstránený
Došlo k chybe




















































