Trojsmerný sklápačský prívesMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Trojsmerný sklápačský príves
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
pevná cena bez DPH
28 500 €
(33 915 € brutto)
Rok výroby
2024
Stav
Nový
Umiestnenie
Egestorf 

Zobraziť obrázky
Zobraziť mapu
Základné údaje
Cena a lokalita
pevná cena bez DPH
28 500 €
(33 915 € brutto)
- Umiestnenie predajcu:
- Eichenstich 12, 21272 Egestorf, Nemecko

Volať
Technické detaily
- Maximálna hmotnosť nákladu:
- 8 620 kg
- Celková hmotnosť:
- 11 900 kg
- Konfigurácia náprav:
- 2 nápravy
- Dĺžka ložného priestoru:
- 5 500 mm
- Šírka ložného priestoru:
- 2 420 mm
- Výška ložného priestoru:
- 500 mm
Podrobnosti ponuky
- ID záznamu:
- A104-27-000
- Referenčné č.:
- 5892
- Naposledy aktualizované:
- dňa 13.01.2026
Popis
* KA-TA-R 11.9:
—Brakes:
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
—Axles:
* 2 x 5.5 t Gigant axles
—Suspension:
* Parabolic springs with tandem equalizer unit
—Drawbar / Flange Eye:
* Height-adjustable drawbar (hot-dip galvanized, adjustable by 300 mm) with 40 mm flange eye
—Electrics / Lighting:
* Tire pressure monitoring system (TPMS)
* 15-pin power connector
* LED tail lights
—General Attachments:
* Jost mechanical landing leg at the front
* Two mechanical hot-dip galvanized foldable supports at the rear
* Tool box made of galvanized sheet steel, mounted right side
* Hot-dip galvanized bolt-on underrun protection
* Tool box made of galvanized sheet steel, mounted right side
* Plastic quarter mudguards
—Tipping Platform:
* Mesh hooks on the sides and rear in the central locking mounts, plus 3 on the front wall
* Hot-dip galvanized chassis
* Steel pallet three-way tipping body
* Continuous drop sides without center stanchions, foldable with sideboard spring assist
* Tailgate foldable or swinging, operated via manual central locking
* Bolted, hot-dip galvanized rear stanchions
* 4 mm steel floor plate
* Prepared for retrofitting of side wall extensions
Podpel Thx Ejfx Agnsgg
* 5.5 m platform length
—Load Securing:
* Each corner fitted with one 5 t lashing point
* Four 3 t lashing rings per side, mounted flush in the outer frame
—Ramps:
* Rear mounting rail for drive-on ramps
* Pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the load bed, integrated into the chassis from the rear
—Wheelbase:
* Wheelbase: 990 mm
—Tyres:
* Tyres: 235/75 R17.5
—Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in black
* Platform superstructure color: RAL 9010 pure white
* Custom painting of side walls and tipping bridge in other RAL colors available at extra cost
—Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer's warranty
* Subject to errors and prior sale
—Delivery Time:
* Immediately available ex Egestorf, A7
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
—Brakes:
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
—Axles:
* 2 x 5.5 t Gigant axles
—Suspension:
* Parabolic springs with tandem equalizer unit
—Drawbar / Flange Eye:
* Height-adjustable drawbar (hot-dip galvanized, adjustable by 300 mm) with 40 mm flange eye
—Electrics / Lighting:
* Tire pressure monitoring system (TPMS)
* 15-pin power connector
* LED tail lights
—General Attachments:
* Jost mechanical landing leg at the front
* Two mechanical hot-dip galvanized foldable supports at the rear
* Tool box made of galvanized sheet steel, mounted right side
* Hot-dip galvanized bolt-on underrun protection
* Tool box made of galvanized sheet steel, mounted right side
* Plastic quarter mudguards
—Tipping Platform:
* Mesh hooks on the sides and rear in the central locking mounts, plus 3 on the front wall
* Hot-dip galvanized chassis
* Steel pallet three-way tipping body
* Continuous drop sides without center stanchions, foldable with sideboard spring assist
* Tailgate foldable or swinging, operated via manual central locking
* Bolted, hot-dip galvanized rear stanchions
* 4 mm steel floor plate
* Prepared for retrofitting of side wall extensions
Podpel Thx Ejfx Agnsgg
* 5.5 m platform length
—Load Securing:
* Each corner fitted with one 5 t lashing point
* Four 3 t lashing rings per side, mounted flush in the outer frame
—Ramps:
* Rear mounting rail for drive-on ramps
* Pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the load bed, integrated into the chassis from the rear
—Wheelbase:
* Wheelbase: 990 mm
—Tyres:
* Tyres: 235/75 R17.5
—Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in black
* Platform superstructure color: RAL 9010 pure white
* Custom painting of side walls and tipping bridge in other RAL colors available at extra cost
—Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer's warranty
* Subject to errors and prior sale
—Delivery Time:
* Immediately available ex Egestorf, A7
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
Poskytovateľ
Poznámka: Zaregistrujte sa zadarmo alebo sa prihláste, aby ste získali všetky informácie.
Registrované od: 2001
Odoslať žiadosť
Telefón & Fax
+49 40 33... inzercie
Tieto inzeráty by vás mohli tiež zaujímať.
Váš inzerát bol úspešne odstránený
Došlo k chybe




















































