Kompresor

Doosan 7 / 41 - N

Stav: použitý, Rok výroby: 2016, prevádzkové hodiny: 945 h, Účel použitia: Stavebníctvo Pohotovostná hmotnosť: 900 kg Ffedpfx Aaowaq D Helst Značka motora: Yanmar 4NTV88 Priechodnosť: 4,1 m³/min Pracovný tlak: 7 bar Pre viac informácií kontaktujte oddelenie predaja.

Stav: nový, pohotovostná hmotnosť: 9 650 kg, maximálna hmotnosť nákladu: 30 350 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 740 mm, šírka ložného priestoru: 2 550 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r17,5 zoll, Rok výroby: 2026, Výbava: ABS, stredová otočná doska, 4-AXLE LOWBED TRAILER WITH TOP-LEVEL EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, TURNTABLE FRAME, ACCESS RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE UNIT!) => SAF LOWBED AXLES => LASHING PACKAGE => PERFORATED OUTER FRAME FOR ADDITIONAL LASHING POINTS => CLEAT STRIPS ON THE REAR OF THE ACCESS SLOPE => 6 LASHING POINTS IN THE EXCAVATOR SHOVEL WELL AT THE REAR END => LONG ONE-PIECE ACCESS RAMPS => SHALLOW RAMP ANGLE Perm. Gross Weight: 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized Turntable frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension SAF axle with drum brakes EBS - Electronic Braking System Fsdohvxgzepfx Aaljft Tires: 235/75R17.5 – 16 ply Lowbed length approx. 7,160 mm Excavator stick recess approx. 3,000 mm x 730 mm x 180 mm at rear lowbed 4 pairs of 10 t recessed lashing rings in the lowbed 2 pairs of 10 t recessed lashing rings in the highbed 4 pairs of 3 t lashing points on lowbed outer frame 3 pairs of 6 t lashing eyes on outer frame 4 pairs of stake pockets on highbed outer frame 4 pairs of stake pockets on lowbed outer frame 3-meter widening package with fold-out extensions (no taper) 4 x warning boards with lighting Rotating beacon at the rear LARGE STEEL TOOLBOX under the loading area 2 storage compartments with hinged lids in the high platform Hydraulic ramp lifters One-piece ramps approx. 3,150 x 750 mm Softwood flooring on loading area and ramps 40,000 kg gross weight only with special permit according to §70 => Delivery freight: €2.90 plus VAT per km => All prices ex works D-86368 Gersthofen Your direct contact: Mr. Hauptmann, Tel. DOLL VEHICLE MANUFACTURING *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sales only to commercial customers!* *Pictures may differ and are for general guidance only => may show/contain optional accessories subject to surcharge*

Stav: použitý, Rok výroby: 2016, prevádzkové hodiny: 1 017 h, Účel použitia: stavebníctvo Prevádzková hmotnosť: 900 kg Značka motora: Yanmar 4TNV88-K Výkon: 4,1 m³/min Pracovný tlak: 7 bar Pre viac informácií kontaktujte oddelenie predaja. Ffjdpfx Aajv H I Siolot

Stav: použitý, Rok výroby: 2012, prevádzkové hodiny: 1 858 h, Účel použitia: Stavebníctvo Pohotovostná hmotnosť: 900 kg Fodpov H I Svjfx Aaleft Značka motora: Yanmar 4NTV88 Priechodnosť: 4,1 m³/min Pracovný tlak: 7 bar Pre viac informácií kontaktujte oddelenie predaja.

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower system and RtR valve * SmartBoard for payload determination * Warning sign packages at the front & rear * Contour marking tape, reflective, on sides and rear Ffsdpfx Ael Tphrsalot * Removable rear beacon light * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel sheet and spare wheel holder in basket design on the right side * Front closed plastic single mudguards * Rear straight steel mud flaps, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm, with 45° corners and 3 recessed lockable storage compartments including lids * Chassis made from high-strength fine-grained steel * Decking over the turntable platform made from 50 mm, and in the low-bed platform from 60 mm softwood * Outer planks of the ramps made of hardwood * 4 stake pockets per side (no stakes included) usable as 2 t lashing points at the same time * Load securing package including: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * 2 pairs of 13.4 t lashing rings each at the front and rear sides on the outer frame; 4 pairs per side of 10 t swingable and lowerable lashing rings * Usable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick support * 8 pairs of galvanized folding outriggers for 3 m total width (not at the rear bevel) * Widening planks stored in a compartment on the left side * Excavator stick support above the rear axle up to the start of the rear slope, approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically adjustable ramp tips approx. 4,650 x 720 mm, incl. hydraulic side ramp shift & load holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm entry slope) * Flow divider installed * Chassis, turntable, ramps, folding outriggers, and mechanical support legs hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle without first registration, with manufacturer's warranty * Errors and prior sale excepted * Available from CW 07/2026