Müller-Mitteltal 4-Achs Anh. Tieflader, Klapprampe, Gummibelag kúpiť použité (41 849)

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes Kdjdpfxoylfvme Ac Isl ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: nový, maximálna hmotnosť nákladu: 31 900 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40.0 ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and Run-on-Release (RtR) valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck cockpit via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning panel packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, side right * Closed plastic individual fenders at the front * Straight steel rear splash guards each with spray suppression * Side underrun protection ----Low Loader Platform: * Gooseneck platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable covers * Floor over the gooseneck platform made of 50 mm and in the lowbed platform of 60 mm softwood * 20 mm rubber matting instead of wooden floor in the running track area with a lowbed length of 6,780 mm including the ramp slope * Rubber matting on the ramp slope, left and right, approx. 860 mm long * 4 side stake pockets per side (stakes not included) each with simultaneous 2 t lashing point ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Gooseneck Platform: * 2 pairs of 13.4 t lashing rings in the outer frame of the gooseneck platform Lowbed: * 4 pairs of 10 t lashing rings per side on the outer frame, retractable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings per side at the rear ----Ramps: * Rubber matting on the folding ramps * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shifting & load holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger brackets for total width of 3 m (not in the rear slope area) * Widening planks stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the ramp slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 t lashing rings per side in the excavator arm rest Kdedpfeylfvgjx Ac Iel ----Hydraulics: * Hydraulic flow divider on the trailer (for hydraulic pump output in the truck of over 40 - up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Loading area over turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm loaded, +/- 20 mm ----Paintwork: * Reflective contour tape on the sides and rear * Chassis, gooseneck, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air reservoirs, and turntable painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors * Sample images may show special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stav: použitý, pohotovostná hmotnosť: 8 850 kg, maximálna hmotnosť nákladu: 31 150 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2019, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Celková dĺžka ložnej plochy cca 9.500 mm, dĺžka ložnej plochy hlbokého lôžka cca 7.360 mm, nakladacia výška cca 910 mm, 14 párov kotviacich ôk, vozidlo ponúkané na zákazku. Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie. Viac údajov na vyžiadanie! Kjdpfxjy Nixho Ac Iedl

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS - Pneumatiky MICHELIN: 235/75 R 17.5 - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm Kdsdpowmpbdjfx Ac Isl - Ťažné oko: 50 mm Obzvlášť vhodný na prepravu fréz na vápno! - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený!

Stav: použitý, pohotovostná hmotnosť: 8 680 kg, maximálna hmotnosť nákladu: 31 320 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2018, zavesenie: iný, veľkosť pneumatiky: 235/75R17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5, veľkosť zadnej pneumatiky: 235/75R17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Kotviace oká, ABS, rozšírenie s výstražnými tabuľami, vozidlo sa predáva na objednávku., -- Vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky --, Viac údajov na: !, More Details: ! Kjdpfxoy Igu De Ac Iedl

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: ! Kdjdpfx Acsy Tll So Iel

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: ! Ksdpfx Acsy Ryb Nj Iodl

Stav: použitý, maximálna hmotnosť nákladu: 30 700 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2002, Výbava: ABS, * MüllerMitteltal 4-nápravový nízkozdvižný príves T40 * 2x riadené otočné nápravy Ksdpfxsyuri Es Ac Ijdl * Nemecký príves * pero * hydraulicky posuvné rampy / vľavo-vpravo * delené sklopné rampy * možnosť rozšírenia * ABS * BPW nápravy * 40 t * vlastná hmotnosť: 9300 kg * zaťaženie na nápravu = 10 t na nápravu * plne funkčný * pneumatiky v poriadku

Stav: použitý, pohotovostná hmotnosť: 6 200 kg, maximálna hmotnosť nákladu: 23 800 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2006, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17,5 141/140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5 141/140J, veľkosť zadnej pneumatiky: 235/75R17,5 141/140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Upevňovacie oká, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na: !, Viac informácií na: ! Kedpfxsy Hh Ico Ac Ijdl

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Kodpfxjy Tln Ts Ac Isdl

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Kedpfx Aey Rr Ihec Ijdl

Stav: použitý, pohotovostná hmotnosť: 5 750 kg, maximálna hmotnosť nákladu: 24 250 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/1993, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17,5 141/140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5 141/140J, veľkosť zadnej pneumatiky: 235/75R17,5 141/140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov: ! Kedpfx Acoy Ifhvs Ijdl

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp Kdsdsl Tihuspfx Ac Iel ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics Ksdexptn Dopfx Ac Isdl ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tyre pressure monitoring system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalisation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanised steel skirts, each with spray protection * Reflective contour tape on sides and rear * Tool box made of galvanised steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanised) for tool box on turntable platform * Multi-voltage electrical system * LED rear lights Kdedpfx Aol Th I Aec Isl * Removable rotating beacon at the rear * Drawbar with 50 mm draw eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swivelling and retractable, loadable in all directions and recessed into the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the centre of the loading area * One-piece hot-dip galvanised hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on taper) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanised * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tyres * Unladen weight approx. 5,980 kg * Technical permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for toolbox located on the bogie platform * Multi-voltage system Kodol Th Nnopfx Ac Ijdl * LED tail lights * Removable rotating beacon at the rear * Drawbar with 50 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lash-down points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of bogie platform, 6 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t each * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear tapered section) * Widening planks stored in the center of the loading area * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control block for retrofitting hydraulic sideways ramp displacement * Loading platform above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Own weight approx. 5,980 kg * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Errors and intermediate sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * 19.5" disc brakes * Automatic braking when opening the cross-locking units * 2 x 10-ton BPW wide track axles * Air suspension (automatic lowering when disconnecting the brake) * Tire pressure monitoring system with display option in the truck via EBS signal—no truck-side installation required * Pneumatically lowerable towing drawbar, 1,800 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic toolbox 858 x 500 x 500 mm fitted on the right side * Stowage box for container net made from galvanized perforated sheet, 1,000 x 500 x 500 mm, side-mounted * Enclosed plastic mudguards front & rear axle * Enclosed side impact guard (RAL 9010 pure white) usable as advertising surface * Rear underride protection * Rear plastic bumper guards * Folding A-sign * Hazardous goods sign with document holder and rear reflective parking warning board * 15-pin electrical connector * LED lighting system with protective cover * 2 LED reversing lights (activated via reverse gear) * Additional front loading possible with rear track lowering and removable stop * Roller recesses in the area of the turntable with mechanically adjustable stop angles (2 positions) at front left and right on the running tracks Kdedsl Tn U Ropfx Ac Iol * Roller track length approx. 6,830 mm * Pneumatic 4-point clamping lock * For transport of external roll containers as per DIN 30722 Part 1—Dekra cargo securing certificate available * Loaded platform height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable, and drawbar painted in black * --Technically permissible gross weight 20,000 kg-- * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale * Available from approx. week 21/2026 * Sample images

Stav: použitý, pohotovostná hmotnosť: 3 550 kg, maximálna hmotnosť nákladu: 10 850 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2012, ďalšia kontrola (TÜV): 04/2027, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, zavesenie: oceľ, veľkosť pneumatiky: 385/55R19,5 150J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 385/55R19,5 150J, veľkosť zadnej pneumatiky: 385/55R19,5 150J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Kotviace oká, široké pneumatiky, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, Viac detailov: ! Kdodpfsy R Dgiox Ac Iol

Stav: použitý, pohotovostná hmotnosť: 3 680 kg, maximálna hmotnosť nákladu: 10 720 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 11/2021, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, zavesenie: oceľ, veľkosť pneumatiky: 385/55R19,5 156J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 385/55R19,5 156J, veľkosť zadnej pneumatiky: 385/55R19,5 156J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, AKO NOVÝ, široké pneumatiky, sklápačová plošina POZINKOVANÁ, 12 kotviacich ôk, bočnice 600 mm, príplatok za rampy 1.000 €, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na požiadanie! Kdodpfxoy N Rwfj Ac Isl

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: Kdedpfx Aeq Euaksc Iel ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for maneuvering purposes on the first axle, controlled via EBS (without truck-side installation) * Rear-most axle as trailing steering axle with electro-pneumatic steering lock * Trailing axle lock operated from the cab for maneuvering via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system and Ride-Height Return (RtR) valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as infotool with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable rear LED warning beacon * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swiveling supports at the rear of the chassis * Straight steel fenders * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low Loader Deck: * 2nd king pin position * Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high folded and removable aluminum side boards (in RAL custom color) on the sides of the semi-trailer platform * Removable rear board, 150 mm high * Rear slope on the semi-trailer platform to low-bed section, approx. 700 mm long with chequered plate covering, as well as a perforated strip at the end for attaching aluminum approach ramps * Semi-trailer platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Checker plate over the axles * 9 mechanical folding extensions for total width up to 3 meters, except on the rear slope (extension boards available, with closed storage compartment transversal under the loading area) * 3 recesses under the platform for storing either aluminum approach ramps or wooden planks for wheel well covers ----Load Securing (LaSi package): Semi-trailer Platform: * Perforated outer frame, 45° angled, with pattern for lashing equipment (2 t lashing capacity per lashing point at a min. 480 mm spacing) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the semi-trailer platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low-Bed Platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the semi-trailer platform step, 1 x start of the ramp slope, 1 x end of ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel wells (2 on the front well, 1 on the rear) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle, over the steering axle, to the end beam, continuous, with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 / Depth front 170 mm * Each side with 2 x 6.4 t lashing ri

Stav: nový, maximálna hmotnosť nákladu: 37 390 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the cab for shunting purposes, operated via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring system with display function in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning signage packages at the front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low-bed loading area: * 2nd king pin position * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminum side boards on the fifth wheel platform (custom RAL color), foldable and removable * Rear wall -150 mm- slotted in * Rear chamfer on the fifth wheel platform to low-bed, approx. 700 mm long with checker plate cover and at the end a perforated strip for hooking in aluminum approach ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, and low-bed platform with 60 mm clamped wooden floorboards * Checker plate above the axles * 9 mechanical folding wideners to 3 m total width, but not on the rear chamfer (widening planks available with closed storage box transversely under the loading area) * 3 receiver shafts under the fifth wheel platform for optional storage of aluminum approach ramps or wooden planks for covering wheel recesses Kodpfetpta Dsx Ac Ijdl ----Load securing (LaSi Package): Fifth wheel platform: * Perforated outer frame bent at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point with a minimum spacing of 480 mm) * Each side: 3 x 13.4 t lashing rings recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the kick-up, 1 x above the middle axle next to the longitudinal beam) Low-bed platform: * Each side: 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the fifth wheel platform kick-up, 1 x at the beginning of the approach ramp, 1 x at the end of the approach ramp) * Each side: 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between the 2nd and 3rd axle) * Each side: 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator arm trough: * Extended excavator arm trough, continuous from end of last rigid axle over steering axle to end cross member, with inner reinforcement profile approx. W = 770 mm x D rear = 27

Stav: použitý, maximálna hmotnosť nákladu: 38 230 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2026, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Müller-Mitteltal Low Loader with Wheel Recesses TS 3 RM ML 30.0, 2 Loading Heights and Ramps * King Pin Load Increase from 12 t to 18 t incl. King pin mounted in: second king pin position 2", king pin up to and including gooseneck 2,750 mm. Rear clearance radius approx. 2,400 mm in the clear (minimum clearance of 150 mm recommended). Front clearance radius 1,480 mm or 1,570 mm with spare wheel. Note: Adequate clearance to the tractor unit must be ensured by the customer. * Extension components for the front and rear wheel recesses (205 mm deep). 6 loose planks for wheel recesses with bracket holders as receiving shafts according to code 09.112. Aluminum air tank instead of steel. * Smartboard control box mounted as an info tool on the trailer with pressure sensors, serves as a total axle load indicator. Display possible either via the control box or in the truck via the EBS air suspension system (depending on truck manufacturer). * SP Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the tractor platform B=2,480 x H=500 mm with top hinged lid, side doors and slanted. Aluminum side panels foldable to tractor platform (500 mm high), aluminum rear wall plug-in (150 mm high), aluminum drop sides inside and outside in RAL 9006 white aluminum painted. Includes foldable & removable rear stakes, galvanized (without final coat). Includes bolted front structure. Length front cross member to gooseneck 3,935 mm. Front clearance radius, without spare wheel, at gooseneck dimensions 2,450 mm or 2,750 mm approx. 1,750 or approx. 1,480 mm * 2 container locks recessed in the front cross member * 3 storage shafts under the tractor platform for optional aluminum approach ramps or wooden planks for wheel recess covers * Folding outriggers/extending outriggers (galvanized) and wooden planks for widening included (not at the rear slope), plank holder on the tractor platform (track width of the load must not exceed 2,500 mm) * Second LED position light at the warning package front and rear (double lighting), only in conjunction with the warning package Kdjdpfxey R Ipuo Ac Isl * 2 LED reversing spotlights on the rear of the trailer, controlled by reverse gear (suitable for 12V and 24V), max. a total of 2 additional permissible * 7-pin socket at the rear, assigned for overlength lighting with tail light (58R) and ground * Rubber covering on the loading ramp slope left and right (approx. 860 mm long), 190 07644 rubber covering strip on the inner plank of the one-piece ramps * Fully automatic central lubrication system with pump (24V), grease container and integrated trailer control, without ramp connection (for steering: incl. connection of the manifold on the tractor platform). Note: Only possible for tractor units with 24V lighting system! Subject to prior sale and errors! Sale exclusively according to our terms and conditions Important note ? Important information: Despite careful verification of all details in our offer, errors may occur. Some are caused by transmission errors in the systems of various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for contract initiation. The details provided here are without guarantee and do not constitute assured characteristics.

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic suspension with compensating unit ----Drawbar / Flange Drawbar Eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange drawbar eye ----Lighting / Electronics: * TPMS (Tyre Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * 50 mm softwood flooring * Fittings in front of the front wall for retrofitting container locks * Bolted smooth steel front wall * Trapezoidal, fold-down side walls with drop-side lift assist * Slidable steel rear wall between the ramps – stowed on inside front wall mounting when not in use * Bolt-on rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm Kedpfeq Dyvvox Ac Isdl * Optional installation of 3 t recessed lashing rings at 600 mm intervals * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various boreholes in the front and rear cross-members for 1.2 t lashing options * Profifix lashing rail centrally along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece mechanical mesh loading ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear ramp slope approx. 860 mm ----Paint/Finish: * Hot-dip galvanized chassis, drawbar, front wall, loading ramps, and rear wall * Side board color in RAL 9010 pure white * Painting of side walls in other RAL colors available at extra charge ----Information: * --Reinforced and certified body built to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: * Available from calendar week 29/2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange-eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm (to 2,250 mm total) * 40 mm flange towing eye ----Lighting / Electrics: Kdedpfervvflox Ac Iel * TPMS (tire pressure monitoring system) * LED lighting ----General Attachments: * Jost landing leg at front * Externally mounted, hot-dip galvanized folding support legs at rear * Plastic toolbox mounted front right on bulkhead * Side underrun protection * Plastic quarter-mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Side panels made of trapezoidal profile steel, foldable with drop-side spring-assisted lifting * Rear steel wall, insertable between ramps, storage holder at front bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, approx. 45° crimped, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and end cross members for 1.2 t lashing options * Profifix lashing rail along vehicle centerline for lashing up to LC 3000 daN ----Ramps: * Single-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear ramp slope approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Drop-side color in RAL 9010 pure white * Side panel painting in a chosen RAL color available at extra charge ----Notes: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Lead Time: * Available from approx. week 29/2026

Stav: použitý, maximálna hmotnosť nákladu: 39 500 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2010, ďalšia kontrola (TÜV): 12/2026, dĺžka ložného priestoru: 9 345 mm, Rok výroby: 2010, * Müller Mitteltal T50 Kompakt * Nízka nakladacia plošina (tieflader) * Rámpy * Pneumatiky: viď fotografie * 5 náprav * Gigant nápravy * Povolená celková hmotnosť: 50 000 kg * Pohotovostná hmotnosť: 10 500 kg * Užitočné zaťaženie: 39 500 kg * Vzduchové odpruženie * Okamžite k dispozícii * Možnosť chyby vyhradená Máte otázky? Kontaktujte nás pre rýchlu konzultáciu, prípadne priamo cez WhatsApp: Ponúkame: Čistý nákup pre firmy z EÚ s platným IČ DPH, rovnako aj pre zákazníkov z tretích krajín. Možnosť leasingu a financovania. Zabezpečenie všetkých colných formalít. Vystavenie krátkodobých a vývozných ŠPZ. Kdjdpfx Asyzlyxoc Isl Doprava do prístavu. Všetky ceny na portáli Kleinanzeigen sú uvedené ako ceny s DPH a zahŕňajú zákonnú DPH vo výške 19 %.