Müller-Mitteltal Ets-Ta-B 10,7 kúpiť použité (33 850)

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter Ncodpfx Afoxf Skvs Tjr * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Ncsdpfxoq Ra D Es Af Tjr ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right exterior on headboard ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Load Area: * Load area: 6.27 m * Suitable for container transport * 50 mm softwood floor * Bracket in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Sidewalls made of steel sheet, trapezoidal profile, foldable, with spring-assisted dropside devices * Steel rear wall can be fitted between ramp mounts, stowed inside in front of the headboard when not in use * Rear posts bolted ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * 3 t recessed lashing rings can be installed every 600 mm * 1 x 6.3 t lashing point each at front and rear corners * Various holes in front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical drive-on ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Approach slope at rear approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Coating: * Hot-dip galvanized chassis, drawbar, headboard, rear wall, rear posts, and drive-on ramps * Sideboard coating in RAL 9010 pure white * Sidewall coating in any RAL color available at extra cost ----Information: * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: * Available from KW (calendar week) [please specify]

Stav: nový, maximálna hmotnosť nákladu: 8 870 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing leg at front * External galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right on the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Mounting device in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth plate * Drop-down sidewalls made of trapezoidal profiled steel with folding wall spring assist * Removable steel rear wall slot-in between ramp supports when not in use, stored inside in front of the bulkhead * Bolt-on rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree edged, with 2 t lashing capacity every 480 mm * Option for 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 6.3 t lashing point * Various predrilled holes in front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical drive-on ramps with spring assembly for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) * Rear approach ramp approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stanchions and drive-on ramps * Side wall paint finish in RAL 9010 pure white * Sidewall painting available in alternative RAL colors at extra cost ----Information: * Subject to errors and prior sale Nsdpervvfwsfx Af Tecr * New vehicle with manufacturer's warranty ----Delivery Time: ?Available from week KW

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost support crank at the front * External folding supports at the rear * Tool box made of galvanized steel plate approx. 650 x 350 x 320 mm, right-hand side (black powder-coated) * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package on chassis for drill rig transport – load height +20 mm * 50 mm softwood floor, clamped design * Provision at front bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Side panels made of trapezoidal profiled steel, folding with drop-side lifting aids * Steel rear wall slidable between ramps – storage bracket inside at front bulkhead when not in use * Rear stanchions bolted * Perforated outer frame approx. 45° bent, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner 1 x 10 t lashing ring; various holes in front and rear cross-members for 1.2 t lashing options * One-piece mechanical steel grate ramps with spring assist for one-person operation, approx. 2,750 x 620 mm (can be pushed together up to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, rear folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and support crank painted in black * Wheelbase: 1,310 mm Ncjdepk D Ncjpfx Af Tjr * Tires: 235/75R17.5 * Side panels painted in RAL 9010 pure white * Painting of side panels in a RAL color of your choice available at extra cost * New vehicle with manufacturer's warranty * Subject to error and prior sale * Available immediately ex stock Egestorf

Stav: nový, maximálna hmotnosť nákladu: 14 550 kg, celková hmotnosť: 19 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension, drawbar with 50 mm flanged towing eye and height-adjustable drawbar * Front Jost landing gear * Rear external folding supports * Toolbox made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (black powder-coated) * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm * 50 mm softwood floor, clamped version * Front wall pre-fitted for subsequent installation of container locks * Bolted front wall made of flat steel sheet * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Steel rear wall, can be inserted between the ramps – storage bracket in front of the front wall when not in use * Rear stanchions bolted * Perforated external frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner front and rear: 1 x 10 t lashing ring; in the front and rear cross-member: several holes for 1.2 t lashing options * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible down to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, tailboard, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a black tone * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Drop sides painted in RAL 9010 pure white * Side walls paintable in any RAL color for an additional charge * New vehicle with manufacturer’s warranty Ncjdpfx Aopk D D Hjf Tsr * Errors and prior sale excepted * Available immediately ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem balance unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm displacement via headplate) with elevated gantry for connection lines * 12 V 7 + 4-pin electrical wiring * 12 / 24 V LED lighting system with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle, no installation required on the towing side * Side marker lights with indicator operation * Plastic quarter mudguards Ncodpfx Afor Dpzuj Tor * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Chassis made of fine-grain steel * Steel platform - 3-way tipper body with M-Strong side panels (fixed front wall, continuous side walls - without central posts - pendulum-mounted via manual central locking and mechanically foldable with side panel spring lifter * Hydraulic tailgate, 500 mm high, as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 t lashing rings in each corner, as well as 4 x 3 t on each side, recessed and foldable * Hot-dip galvanized two-step access in front of the front wall (driver's side left) * 1 pair of aluminum loading ramps (10 t / pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receptacle shafts for aluminum loading ramps, recessed into the rear of the chassis, load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Superstructure painted in RAL 9010 pure white * Chassis, drawbar, rear drop-down supports, underride guard hot-dip galvanized * Axles, air tank, front support winch * K80 coupling painted in black * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * EBS (electronic braking system) Njdpfol Th Dfsx Af Tocr * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering system * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in truck via EBS signal – no installation required on truck side * 15-pin power connector * LED lighting * Support winch at front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted externally, front right on bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Fixtures in front of bulkhead and at rear for retrofitting 20" container locks * Bolt-on smooth sheet steel bulkhead * Side panels made of trapezoidal-profile steel sheet, drop-down, split 1x in the middle * Sliding steel rear wall storable inside on the bulkhead when not in use * Bolt-on rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing brackets every 600 mm – 4 lashing rings installed on each side * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear end members for 1.2 t lashing options * One-piece mech. mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flanged towing eye, and support winch painted in black tone * Side panel paint color freely selectable up to approx. two weeks before production date (no metallic or special colors) * --Reinforced and certified body according to EN 12642 XL incl. load-securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available, Egestorf

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2025, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes Njdpfx Aowh Hdxef Tocr * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with in-cab display via EBS signal – no installation required on truck side * 15-pin electrical connector * LED lighting * Front landing gear * Rear external folding support legs * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on bulkhead exterior Ncsdel Thvxepfx Af Tsr * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Mounting provisions for retrofitting 20" container locks in front of bulkhead and at rear * Bolted bulkhead made from smooth sheet steel * Side walls made of trapezoidal-profiled sheet steel, drop-down, split centrally 1x * Steel rear wall, retractable between ramp holders, with storage bracket inside front of bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, bent approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm (4 lashing rings fitted on each side) * One 6.3 t lashing ring in each front and rear corner * Several holes in front and end crossmember for 1.2 t lashing points * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm height) * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange tow eye, and landing gear painted in black * Side panel paint color freely selectable up to approx. 2 weeks before production date (no metallic or special colors) * -- Reinforced and certified body according to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available in Egestorf

Stav: nový, maximálna hmotnosť nákladu: 16 000 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 500 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2024, * KA-TA-RT 21.0 ML: * Without ABS/EBS, with 40 km/h approval * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalizing unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball head coupling ring (offset by +77 mm / 33 mm via the head plate), with elevated tower for the connection lines * 12 V, 7 + 4-pin power cable * LED lighting system 12/24 V with protective grid * 2 LED work lights at the rear, switchable from the towing vehicle without on-vehicle installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Chassis made of high-tensile steel * Steel three-way tipper body with M-Strong sidewalls (fixed front wall, continuous side walls – without center stanchions – pendulum-mounted via manual central locking and mechanically foldable with sideboard spring lift * Hydraulic tailgate 500 mm high, serves as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * One recessed and foldable lashing ring (7 t) in each corner; 4 recessed and foldable side lashing rings (3 t each) * Hot-dip galvanized two-step access ladder in front of the front wall (on the left) * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 storage compartments for aluminum ramps, integrated from the rear in the chassis; load securing in accordance with EN 12642 XL * --Coupling height loaded approx. 530 mm, unloaded approx. 590 mm-- * Body paintwork in RAL 9010 pure white Ncjdpfx Afsr Dpz Ho Tjr * Chassis, drawbar, rear supports, underrun protection hot-dip galvanized * Axles, air tanks, front support winch * K80 coupling painted in black * New vehicle with manufacturer's warranty * Errors and interim sale subject to change * Immediately available ex Egestorf

Stav: použitý, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 10/2006, dĺžka ložného priestoru: 9 500 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 1 250 mm, * Komi príves pre výmenné kontajnery Abroll & Absetz * Pneumatické zaistenie kontajnera * Výškovo nastaviteľné oje * BPW nápravy vzduch/vzduch Tak ako bolo prehliadnuté, resp. ponúkané, bez ďalších služieb / príslušenstva. Naša ponuka je všeobecne bez novej technickej kontroly (STK/TÜV). V prípade záujmu o novú technickú kontrolu Vám radi pripravíme ponuku od našich partnerských servisov! Vozidlo môže byť polepené alebo popísané reklamnými nápismi. Ncodpfxeizy Nyo Af Tjr Platí naše všeobecné dodacie a platobné podmienky. Pomôžeme Vám pri exporte, vypracovaní vývozných dokladov, získaní evidenčných značiek, vyhlásení dodávateľa a pod.! Uvedené údaje v inzerátoch, na internete, cenovkách a fotografiách sú nezáväzné popisy a neslúžia ako garantované vlastnosti. Predávajúci nepreberá žiadnu zodpovednosť/ručenie za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné v prípade záujmu overiť samostatne. Výslovne si vyhradzujeme právo na medzipredaj, keďže tento tovar ponúkame aj na iných portáloch. Údaje o príslušenstve bez záruky. Zmeny, medzipredaj alebo omyly vyhradené. Dôrazne odporúčame a ponúkame možnosť obhliadky a kontroly, aby nedošlo k mylným predstavám o stave a vhodnosti zo strany kupujúceho. Obhliadky a kontroly sú kedykoľvek možné po dohode a sú výslovne vítané.

Stav: použitý, pohotovostná hmotnosť: 8 680 kg, maximálna hmotnosť nákladu: 31 320 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2018, zavesenie: iný, veľkosť pneumatiky: 235/75R17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5, veľkosť zadnej pneumatiky: 235/75R17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Kotviace oká, ABS, rozšírenie s výstražnými tabuľami, vozidlo sa predáva na objednávku., -- Vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky --, Viac údajov na: !, More Details: ! Njdpfxsyy I Uvs Af Tecr

Stav: použitý, najazdené kilometre: 464 701 km, výkon: 96 kW (130,52 k), typ paliva: nafta, palivo: nafta, emisná trieda: Euro 3, Rok výroby: 2005, Výbava: ABS, prípojné zariadenie, Hrubá hmotnosť: 4.470 kg Užitočné zaťaženie: 3.020 kg Nodeyx If Eepfx Af Tjcr CELKOVÁ HMOTNOSŤ: 7.490 kg

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Nodpfxsy Etpvs Af Tecr

Stav: použitý, pohotovostná hmotnosť: 8 850 kg, maximálna hmotnosť nákladu: 31 150 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2019, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Celková dĺžka ložnej plochy cca 9.500 mm, dĺžka ložnej plochy hlbokého lôžka cca 7.360 mm, nakladacia výška cca 910 mm, 14 párov kotviacich ôk, vozidlo ponúkané na zákazku. Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie. Viac údajov na vyžiadanie! Ncedpfxoy Etl Ds Af Ter

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: ! Nodjy Etl Rspfx Af Tscr

Stav: použitý, pohotovostná hmotnosť: 3 110 kg, maximálna hmotnosť nákladu: 9 490 kg, celková hmotnosť: 12 600 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 05/2016, ďalšia kontrola (TÜV): 02/2025, dĺžka ložného priestoru: 4 550 mm, šírka ložného priestoru: 2 380 mm, výška ložného priestoru: 600 mm, zavesenie: oceľ, veľkosť pneumatiky: 285/70R19.5, farba: modrá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, oceľová nadstavba, 2 nápravy, ojový príves, listové pruženie, ABS (protiblokovací systém), upevňovacie oká, odkladacia schránka, výkyvné dvere Ncedpewth Iiefx Af Tor Nadstavba: 2-nápravový trojstranný sklápací príves s gigantovými nápravami, bubnové brzdy, rám žiarovo zinkovaný! Nakladacia výška cca 1290 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas medziobdobia a chyby vyhradené!

Stav: použitý, konfigurácia náprav: 3 nápravy, zavesenie: parabolický list (pružina), veľkosť pneumatiky: 235-75R17.5, Rok výroby: 2010, 3-nápravový nízkozdvižný príves, prejazdný zozadu. Povolená celková hmotnosť 30 000 kg, užitočné zaťaženie 22 700 kg. Nakladacia plocha 8 900 mm (7 000 + 1 900) x 2 550 mm, výstražný balík pre nadrozmer, 12 kotviacich ôk a 8 vreciek na stĺpiky s možnosťou súčasného kotvenia, 6 prepraviek na náradie. Dvojdielne hydraulické rampy cca 2 100 + 2 000 x 800 mm s gumovým povrchom, hydraulická zadná podpera. Nápravy BPW, EBS, parabolické pruženie s vyrovnávacou jednotkou, pneumatiky 235-75 R 17.5. Kovaný oje, otočné ťažné oko 40+50 mm. 2-vedenie pneumatík (duomatic), 2-vedenie hydrauliky, 24 voltov. Výška nakladania prázdneho prívesu cca 910 mm. Oranžový náter. STK platná do 03-2027. = Ďalšie informácie = Rozmer pneumatiky: 235-75R17.5 Pruženie: parabolické Ncjdpey Evvlsfx Af Tjr Vlastná hmotnosť: 7 300 kg Užitočné zaťaženie: 22 700 kg Celková hmotnosť: 30 000 kg Krajina výroby: DE Kontaktujte Jana-Marca Schwickerta pre viac informácií.

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2010, zavesenie: oceľ, veľkosť pneumatiky: 235 / 75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235 / 75 R 17,5, veľkosť zadnej pneumatiky: 235 / 75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Vozidlo sa predáva na zákazku zákazníka., čiastočne poškodené drevené podlahové dosky, 17 párov kotviacich ôk, výška nakladania cca 900 mm, -- technické údaje, chyby a zmeny vyhradené, ilustračné fotografie --, Viac informácií nájdete na: !, Ďalšie podrobnosti: ! Ncedpjyy I U Nsfx Af Ter

Stav: použitý, pohotovostná hmotnosť: 7 340 kg, maximálna hmotnosť nákladu: 22 660 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 05/2012, dĺžka ložného priestoru: 9 200 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75 R 17,5, veľkosť zadnej pneumatiky: 235/75 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Dĺžka ložnej plochy cca 9 200 mm, ložná výška cca 900 mm, 16x kotviacich ôk, vozidlo sa predáva na objednávku, vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky. Viac údajov na: !, More Details: ! Ncedpfx Ajyy I U Aof Tjr

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V Ncjdpfx Aeykx Nkjf Tor * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: Ncodpjykx Nqsfx Af Ter * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 09/1993, Rok výroby: 1993, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS = Ďalšie informácie = Ncsdpfx Asxt Rw Ref Tsr Hrubá hmotnosť: 4.600 kg Užitočné zaťaženie: 13.400 kg CELKOVÁ HMOTNOSŤ: 18.000 kg Predajná cena: € 6.500, US$ 7.658

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profil 30.0: * EBS-E (elektronisches Bremssystem) * RDÜ Reifendrucküberwachung * Notlöseeinrichtung für Federspeicherzylinder * Trommelbremsen * 3 x 11 t BPW Eco Achsen * Luftfederung mit Hebe- und Senkanlage * SmartBoard als Infotool am Anhänger, inkl. Drucksensoren zur Anzeige der Gesamtachslast je Achsgruppe * Seitlicher Anfahrschutz * Mechanisch verstellbare Warntafelsätze vorn und hinten * Vorderachse mit geschlossenen Kunststoffkotflügeln, Hinterachse mit geraden, feuerverzinkten Stahlblechschürzen, jeweils mit Spritzschutz * Klappdeckel (feuerverzinkt) zum Werkzeugkasten in der Drehgestellplattform * Werkzeugkasten aus verzinktem Stahlblech, ca. 650 x 300 x 600 mm (schwarz pulverbeschichtet), seitlich rechts * 15-poliger Stromstecker * LED-Beleuchtung 12 / 24 V * LED-Rundumkennleuchte (abnehmbar) hinten * Seitenmarkierungsleuchten mit Blinkeransteuerung * Zugstange mit 40 mm Zugöse sowie Höhenverstellung über Zugfeder & Spannschloss * Reifendrucküberwachungssystem mit Anzeige im LKW über EBS-Signal (keine LKW-seitige Installation notwendig) * Gummiauflage auf den Klapprampen sowie an der Auffahrschräge links und rechts (ca. 860 mm lang) * Gummibelag auf den Längsträgern vom Stirn- bis Abschlussquerträger * Hartholzboden auf den Laufflächen der Tiefladeplattform * Jeweils 4 Rungentaschen pro Seite, kombinierbar mit 2 t Zurrmöglichkeit * LaSi-Paket bestehend aus: 5 Paar UVV-Zurringe, schwenk- und absenkbar, in alle Richtungen belastbar, im Außenrahmen eingelassen – in den Ecken 13,4 t, sonst 10 t * 6 Paar mechanische Klappausleger für 3 m Gesamtladebreite (nicht an der Heckschräge) * Bohlenhalterung unter der Ladefläche, längsseitig * Walzenanschlag vor dem Stirnträger, hochgezogen, seitlich je 1 x 6,4 t Zurröse * Hydraulische Klapprampen (ca. 4.650 x 720 mm) mit hydraulisch ausstellbarem Spitzteil und Lasthalteventilen * Hydraulischer seitlicher Rampenverschub * Heckabstützung hydraulisch (einstufiger Zylinder) Nsdsq Dyvcepfx Af Tecr * Hydraulischer Mengenteiler im Anhänger (bei Pumpenleistung LKW > 40 l/min bis max. 140 l/min) * Spritzwassergeschützter Hydraulik-Steuerblock * Zweileitungshydraulik * Ladefläche über Drehkranz: ca. 1.960 x 2.520 mm * Hintere Ladefläche: ca. 6.500 x 2.520 mm (inkl. 860 mm Anfahrschräge) * Ladehöhe beladen: ca. 890 mm +/- 20 mm (Luftfederung) * Fahrgestell, Drehgestell, Walzenanschlag, Klappverbreiterungen & Auffahrrampen feuerverzinkt * Achsen, Drehkranz, Zugstange, Luftkessel etc. in Schwarz lackiert * Ladehöhe beladen: ca. 890 mm +/- 20 mm * Neufahrzeug mit Herstellergarantie * Irrtümer und Zwischenverkauf vorbehalten * Verfügbar ab KW 20/2026

Stav: nový, maximálna hmotnosť nákladu: 16 400 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profil 30,0: * EBS-E (elektronisches Bremssystem) * RDÜ Reifendrucküberwachung * Notlöseeinrichtung für Federspeicherzylinder * Trommelbremsen * 3 x 11 t BPW Eco Achsen * Luftfederung mit Hebe- und Senkanlage * SmartBoard als Informations-Tool am Anhänger, mit Drucksensoren zur Anzeige der Gesamtachslast je Achsgruppe * Seitlicher Anfahrschutz * Mechanisch verstellbare Warntafelpakete vorne und hinten * VA (Edelstahl) geschlossene Kunststoff-Kotflügel vorne sowie verzinkte, gerade Stahlblechschürzen hinten, jeweils mit Spritzschutz * Klappdeckel (feuerverzinkt) zum Werkzeugkasten in der Drehgestell-Plattform * Werkzeugkasten aus verzinktem Stahlblech, ca. 650 x 300 x 600 mm (schwarz pulverbeschichtet), seitlich rechts * 15-poliger Stromstecker * LED-Beleuchtung 12 / 24 V * LED-Rundumleuchte (abnehmbar) hinten * Seitenmarkierungsleuchten mit Blinkansteuerung * Zugschere mit 40 mm Zugöse und Höheneinstellung über Zugfeder & Spannschloss * Reifendrucküberwachungssystem mit Anzeigeoption im LKW über EBS-Signal (ohne separate LKW-Installation) * Gummibelag auf den Klapprampen sowie auf den Auffahrschrägen links und rechts (je ca. 860 mm lang) * Gummibelag auf Längsträgern vom Stirn- bis Abschlussträger * Hartholzboden auf den Laufflächen der Tiefladeplattform * Je Seite 4 Rungentaschen mit gleichzeitiger 2 t Zurrmöglichkeit * Ladungssicherungspaket bestehend aus: 5 Paar UVV-zertifizierte Zurringe, schwenk- und absenkbar, in alle Richtungen belastbar und im Außenrahmen eingelassen – an den Ecken 13,4 t, sonst 10 t * 6 Paar mechanische Klappausleger für 3 m Gesamtbreite (nicht in der Heckschräge) Njdpotplv Njfx Af Tecr * Bohlenhalter unter der Ladefläche, längs verbaut * Walzenanschlag vor dem Stirnträger hochgezogen, seitlich je 1 x 6,4 t Zurröse * Hydraulische Klapprampen (ca. 4.650 x 720 mm) mit hydraulisch ausstellbarem Spitzteil und Lasthalteventilen * Hydraulischer Seitenverschub der Rampen * Hintere hydraulische Abstützung (einstufiger Zylinder) * Hydraulischer Mengenteiler im Anhänger (bei hydraulischer Pumpenleistung des LKW von über 40 bis max. 140 l/min) * Hydrauliksteuerblock spritzwassergeschützt * Zweileitungshydraulik * Ladefläche über dem Drehkranz: ca. 1.960 x 2.520 mm * Hintere Ladefläche: ca. 6.500 x 2.520 mm (inkl. 860 mm Anfahrschräge) * Ladehöhe beladen: ca. 890 mm +/- 20 mm durch Luftfederung * Fahrgestell, Drehgestell, Walzenanschlag, Klappverbreiterungen und Auffahrrampen feuerverzinkt * Achsen, Drehkranz, Zugschere, Luftkessel etc. in Schwarz lackiert * Ladehöhe beladen: ca. 890 mm +/- 20 mm * Neufahrzeug mit Hersteller-Gewährleistung * Irrtümer und Zwischenverkauf vorbehalten * Lieferbar ab KW 20/2026