Müller-Mitteltal Cisterna kúpiť použité (1 466)

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front landing gear * Spring-assisted square tube supports at the rear with base plate, safety locking pins for variable support heights * Drawbar with 40 mm screwed towing eye (height-adjustable ___ mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross-members * Closed steel mudguards with splash protection * Closed lateral underrun protection usable as advertising space * Plastic toolbox with base insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling cable drum mounting, usable width between drum arms: 1,700 mm; with tension lock to secure the drum ends on the supporting arms as well as a central claw lock to secure the cable drum mounting to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed controller and brake for the drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped * Hydraulic power pack with Loncin gasoline engine, including manual and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) Duedpfx Aisu I Iqrodsu * 315/80 R 22.5 tires * Curb weight 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS brake system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Rear square tube supports with spring assistance and base plates, safety locking pins for multiple support heights * Drawbar with 40 mm screw coupling eye (height adjustable) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubing and cross members * Enclosed steel mudguards with spray protection * Enclosed lateral underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivelling cable drum mount, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the ends of the support arms and a central claw lock for securing the drum mount to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, with centring and rotating ends * 1 pair of stepwise recessed polyamide centring cones * Hydraulic pump unit with Loncin petrol engine, including manual and electric starter * Fuel tank and manual starter Djdpfsu I Iqfsx Aideuu * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tyres * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf * Sample images

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic leaf springs * Front support winch * Spring-assisted square tube supports at the rear with base plates, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector Dujdpfx Aisu I Iq Esdsu * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection that can be used as an advertising surface * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure; clear width between drum arms 1,700 mm; with clamp lock for drum securing at the carrier arm ends and a central claw lock securing the cable drum superstructure to the chassis * Motor hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of polyamide centering cones, stepped in stages * Hydraulic power pack with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Hot-dip galvanized finish * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 000 kg, dovolené zaťaženie nápravy (náprava 2): 10 000 kg, povolené zaťaženie nápravy (náprava 3): 10 000 kg, prvá registrácia: 10/2013, celková šírka: 2 750 mm, Rok výroby: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-axle | Hydraulic lowdeck | 48 t permissible gross weight | 275 cm wide Dodjy I Si Tspfx Aidsuu The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for transporting machinery, construction equipment, and heavy-duty devices. It is renowned for its sturdy build and reliability. Technical specifications: Brand: Müller Mitteltal Model: ITS-VLL 30.0 Profi Chassis number (VIN): WMM00000D0057250 Permissible gross weight: 48,000 kg Axle configuration: 3 axles Axle loads: Axle 1: 10,000 kg Axle 2: 10,000 kg Axle 3: 10,000 kg Permissible point load: 18,000 kg Load deck: Low deck (low loader specification) Loading ramps: hydraulically operated Low bed: hydraulically adjustable (up/down) Tyres: in good condition Construction: all-steel chassis Max speed: 80 km/h Features & Options: Heavy-duty low loader version Hydraulically height-adjustable low deck Hydraulic rear loading ramps Wide (275 cm) and stable loading platform Suitable for excavators, rollers, cranes, etc. Robust construction, ready for immediate use Condition: The trailer is pre-owned but fully functional and shows age and use-related wear marks. Technically a robust and reliable equipment transporter. Ready for immediate use – ideal for transport and construction companies. For further information or to arrange a viewing, please contact us. = Further Information = Axle configuration Rear axle 1: Twin wheels; Max axle load: 10,000 kg; Steered Rear axle 2: Twin wheels; Max axle load: 10,000 kg; Steered Rear axle 3: Twin wheels; Max axle load: 10,000 kg; Steered Weights Unladen weight: 14,500 kg Payload: 33,500 kg Gross vehicle weight: 48,000 kg Maintenance, history, and condition APK (MOT/Technical inspection): valid until 02.2027 Technical condition: very good Visual condition: very good Financial information Price: On request Further information Please contact Klaas Gerrits or Henk Gerrits for more information.

Stav: použitý, maximálna hmotnosť nákladu: 4 960 kg, celková hmotnosť: 10 500 kg, prvá registrácia: 04/1993, ďalšia kontrola (TÜV): 01/2026, dĺžka ložného priestoru: 6 260 mm, šírka ložného priestoru: 2 430 mm, výška ložného priestoru: 2 430 mm, objem nakladacieho priestoru: 37 m³, Výbava: ABS, zdvíhacie čelo, 2-nápravový tandemový chladiarenský príves, 7 m, so zdvíhacou plošinou s nosnosťou 1 t. * THERMOKING LND-II MAX (dieselový motor) a stacionárne chladenie 380 V ELEKTRO * Číslo vozidla pre zákaznícke dopyty: 4593 * Zdvíhacia plošina * Vzduchové pruženie * EBS * Protišmykový systém (ABS) Bez záruky za tlačové a pravopisné chyby Predaj iba podnikateľom Zmeny a medzičasný predaj vyhradené. Popis slúži iba na identifikáciu vozidla a nepredstavuje záruku v zmysle kúpneho práva. Záväzné je znenie v kúpnej zmluve. * TOP SERVIS + KVALITA * Radi Vám pripravíme ponuku na leasing, financovanie alebo splátkový predaj Poistenie záruky na vyžiadanie u poisťovateľa Duedoykxflepfx Aideu * TÜV / UVV LBW / tachografová kontrola a montáž OBU zariadenia cez našich partnerov na mieste * Colná poznávacia značka na 30 dní Všetky colné doklady pre export sú možné, je nutné ich objednať individuálne * Mýto cez Toll-Collect je možné objednať u nás * Bezplatný transfer z letiska Stuttgart alebo železničnej stanice Metzingen (Württ) * ŽELEZNIČNÁ STANICA PRE PRÍCHOD: 72555 METZINGEN/WÜRTT. * PRE ANGLIČTINU * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP číslo * * ---- Navštívte našu webovú stránku na * viac ako 200 vozidiel stále na sklade

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27,0 plošina: * EBS (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové valce * Bubnové brzdy * 3 x 9 t BPW Eco nápravy * Vzduchové odpruženie so zdvíhacou a spúšťacou funkciou s RTR-funkciou * 1. náprava zdvíhateľná * posledná náprava ako následná riadená náprava s elektropneumatickou uzávierkou riadenia cez PIN spätného chodu (uzávierka následnej nápravy z Fhs. pre manévrovacie účely - bez inštalácie na strane nákladného vozidla - zadelená na PIN 10 v 15-kolíkovom konektore, len na manévrovanie, nie pre verejnú cestnú premávku) * SmartBoard ovládacia jednotka ako infotool s tlakovými snímačmi na indikáciu celkového zaťaženia náprav * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v nákladnom vozidle cez EBS signál bez potreby inštalácie v nákladnom vozidle Duedpjr Dpzxefx Aidsu * Pevné stredové ťažné oj s 50 mm prírubovým ťažným okom (zaťažené 900 mm, mm výškové nastavenie na hlavovej doske) * Mechanická podperná kladka vpredu, mechanické výklopné vzpery vzadu na podvozku * Hydraulický rozdeľovač prietoku * Bočné steny priebežné (bez stredových stĺpikov) až po najazdovú rampu * Sklopné zadné stĺpiky * Oceľová zadná stena zasunutá pred zadné stĺpiky * Mechanicky nastaviteľná sada výstražných tabúl vpredu a vzadu * Náradové skrinky z pozinkovaného oceľového plechu - čierny práškový lak - cca 650 x 300 x 600 mm na pravej strane * 15-kolíkový elektrický konektor * LED koncové svetlá * LED maják (odnímateľný) vrátane držiaka a inštalácie * 2 x LED cúvacie svetlá na zadnej časti vozidla (ovládané spätným chodom) * Blikajúce LED bočné obrysové svetlá * 60 mm smrekovcová/douglasková podlážka * 400 mm oceľová čelná stena nasadzovacia * Dierovaný vonkajší rám cca 45° ohnutý s prípravou na montáž 3 t sklopných zaisťovacích strmeňov * V rohoch vždy 1 x 10 t istenie a navyše po bokoch vždy 2 x 10 t, ako aj 3 x 6,3 t zaisťovacie krúžky * V čelnej a zadnej priečke rozličné otvory pre zaisťovacie možnosti 1,2 t * Hydraulické jednoprvkové najazdové rampy cca 3 000 x 720 mm, mechanicky bočne nastaviteľné * 4-ventilový hydraulický blok pre prípadnú dodatočnú montáž hydraulického posuvu nájazdových rámp * Podvozok, ťažné oj, čelná stena, mechanické zadné podpery, najazdové rampy žiarovo zinkované * Nápravy, vzdušník, prírubové ťažné oko a predná podperná kladka nalakované čiernou farbou * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákl. vozidle nad 40 l až do 120 l/min) * Nové vozidlo so zárukou výrobcu * Právo na chyby a medzičasný predaj vyhradené * Ihneď k dispozícii, Egestorf

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: Dedpfx Aioykx Nksdeuu * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) Dedpfx Aisykx Nqsdeuu * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: nový, maximálna hmotnosť nákladu: 20 500 kg, celková hmotnosť: 27 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse PIN (axle lock for maneuvering controlled by PIN 10 of the 15-pin connector—only for maneuvering, not for public road use, without truck-side installation) * SmartBoard control box as information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange eye (loaded height 900 mm, adjustable on head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Mechanically adjustable warning sign kit, front and rear * Toolboxes made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm, mounted on the right side * Hydraulic flow divider * Continuous side walls (without center posts) up to the approach slope * Rear stanchions foldable * Steel rear wall slid in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation * 2 x LED reversing lights at rear of vehicle (operated via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wood floor * 400 mm steel front wall, slotted in * Perforated outer frame, approx. 45° angled, with provisions for mounting 3 t drop lashing rings * In each corner: 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings along each side * Various holes in front and rear crossmembers for 1.2 t lashing options * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm, mechanically adjustable width * 4-section hydraulic control block for optional retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, rear mechanical support legs, ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange eye, and front landing gear painted black * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 l/min up to 120 l/min) * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf Dusdpfx Aijr Dpz Aodeu

Stav: nový, maximálna hmotnosť nákladu: 16 500 kg, celková hmotnosť: 21 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low Loader | Drive-Over Flatbed Trailer Ref. No. for enquiries: 11630 – Vehicle available immediately ex-stock Alsdorf NEW VEHICLE incl. COC Dodsyvxg Ujpfx Aideuu * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Flatbed version with 400mm high front wall, ramp safety via ramp support bar and diagonal bracing * 21t version with reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7m loading area with 400 mm high front wall * Extended ramps: 3m, hot-dip galvanized one-piece ramps with galvanized grating * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * Load securing package: – 4 x UVV drop lashing brackets (LC 8,000 daN) mounted to existing hole pattern in the 45° outer frame, positioned approx. 1m from front/rear cross-member – 10 x UVV retractable lashing brackets LC 3,000 daN in existing hole matrix in the outer frame – 2 x UVV lashing rings each recessed at the front and rear in the cross-member, LC 10,000 daN – Further lashing options through holes (Ø 50 mm, LC 1,200 daN) in the front and rear cross-member * Prepared for retrofitting container locks (container locks available and offered at extra charge) * 50mm thick softwood floor * Gigant air suspension axles incl. EBS 2S/2M, lifting and lowering * 235/75R 17.5 (8 units) dual tires with tire pressure monitoring sensor * Plastic toolbox mounted in front of the front panel, right in direction of travel * LED lighting system * 7-pin socket at the rear, connects to overlength lighting with rear light (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize warning panel * 1 removable LED beacon incl. mounting bracket and installation * Foldable rear supports, front support leg with gear winch --- Sample hire purchase offer from our partner MMV Leasing: €665/month net for 60 months with no down payment and zero residual value Other terms with/without down payment / residual values possible! We are a Müller-Mitteltal trading partner --- Our opening times * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours, we are available by appointment * we speak German, English, Russian, Polish, French * WhatsApp

Stav: použitý, maximálna hmotnosť nákladu: 8 650 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2017, ďalšia kontrola (TÜV): 05/2026, dĺžka ložného priestoru: 6 250 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Ďalšie informácie 400 mm sklápateľné bočné steny - Pružinový zdvihák bočnice - Nasadzovacia zadná stena - Veľký upínací balík - Dierovaná lišta na ložnej ploche Dusdsy Hn D Rspfx Aidju - Predná oporná noha výškovo nastaviteľná - Zadné oporné nohy sklápateľné - Plastová náradová skrinka - BPW nápravy - Pružinové rampy s mriežkou

Stav: použitý, konfigurácia náprav: 2 nápravy, objem nakladacieho priestoru: 10 m³, celková dĺžka: 7 500 mm, celková šírka: 2 550 mm, celková výška: 4 000 mm, Rok výroby: 2012, Aplikačný materiál: Betón Hrubá hmotnosť: 6.530 kg Užitočné zaťaženie: 25.470 kg Dedpfx Aex Utq Ssideuu CELKOVÁ HMOTNOSŤ: 32.000 kg

Stav: nový, maximálna hmotnosť nákladu: 6 810 kg, celková hmotnosť: 9 600 kg, konfigurácia náprav: 1 náprava, dĺžka ložného priestoru: 4 030 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 700 mm, Rok výroby: 2026, * EK 9,6 ----Brzda: * EBS (elektronický brzdový systém) * Núdzové uvoľnenie pružinových valcov * Bubnová brzda ----Náprava: * SAF náprava ----Odpruženie: * Parabolické pružiny ----Ťažné zariadenie / Okno na ťažné zariadenie: * Ťažné zariadenie ako stredná oj s 40 mm skrutkovacím ťažným okom * Plynule nastaviteľná výška ťažného zariadenia pomocou vretenového zdvihacieho prvku namiesto pevného ťažného zariadenia ----Výška spojenia: * Štandardná spojovacia výška približne 900 mm (+/- 150 mm) ----Elektrika / Osvetlenie: Dsdpfow Ndr Uex Aideuu * Kontrola tlaku v pneumatikách s možnosťou zobrazenia v LKW cez EBS signál – bez inštalácie na strane LKW * 15-pólová elektrická zástrčka * LED zadné svetlá * Blikajúce bočné obrysové svetlá ----Všeobecné príslušenstvo: * Predný podperný zdvihák * Uzavreté plastové blatníky * Sklopná ochrana proti podbehnutiu pre cestné finišery ----Podvozok: * Podvozok z jemnozrnnej ocele ----Sklopná korba: * Paletový 3-stranný sklápač * 700 mm oceľová predná stena * Hliníkové bočné steny asymetrické – priebežné bez stredového stĺpika – sklopné s dlhodobejšími západkami, ako aj kyvné cez manuálne centrálne zamykanie * Oceľová zadná stena vysoká 800 mm a automatické otváranie zadnej steny pri vyklápaní dozadu * 4 mm podlaha z ocele Hardox 450 ----Zabezpečenie nákladu: * Na každej strane 2 páry 3 t sklopných upínacích ok, zapustených v oceľovej podlahe ----Lak: * Podvozok, ťažné zariadenie, ochrana proti podbehnutiu žiarovo zinkované * Lakovanie sklopnej korby v požadovanom odtieni RAL (ale žiadne špeciálne alebo metalické lakovanie), možná zmena do cca 6 týždňov pred dokončením ----Informácie: * Nové vozidlo s výrobnou zárukou * Zmeny a predaj vyhradený, chyby vyhradené ----Dodacia lehota: * dostupné približne od 42. týždňa 2026

Stav: použitý, maximálna hmotnosť nákladu: 13 860 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2022, dĺžka ložného priestoru: 6 770 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 600 mm, objem nakladacieho priestoru: 10 m³, Výbava: ABS, ? pozinkované šasi ? nízko podopnuté ? 50 mm ťažné oko ? uzamknutie kontajnera ? 12 kotviacich ôk na každej strane ? cúvacia kamera ? bubnové brzdy Duedpexb Ig Sefx Aidsu ? duomatická prípojka ? ABS ? vzduchové odpruženie ? skrinka na náradie ? EBS ? podperné nohy ? dvojmontáž ? BPW nápravy Všetky údaje sú bez záruky / Medzipredaj vyhradený.

Stav: použitý, maximálna hmotnosť nákladu: 13 860 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2022, dĺžka ložného priestoru: 6 770 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 600 mm, objem nakladacieho priestoru: 10 m³, Výbava: ABS, ? pozinkované šasi ? hlboko spojené ? 50 mm ťažné oko ? uzamknutie kontajnera Dodpfxoxb Igls Aidsuu ? na každej strane 12 kotviacich ôk ? cúvacia kamera ? bubnové brzdy ? Duomatic prípojka ? ABS ? vzduchové pruženie ? náradie ? EBS ? oporné nohy ? dvojmontáž kolies ? BPW nápravy Všetky údaje bez záruky / možnosť medzi predaja vyhradená.

Stav: veľmi dobrý (použitý), konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 85 000 mm, šírka ložného priestoru: 30 000 mm, výška ložného priestoru: 30 000 mm, Rok výroby: 2016, T3 Profile 30, 0: Drum brakes, 3 x 10 t axles, side underrun protection, swivel supports at the rear on the chassis frame, mechanically adjustable warning sign packages at the front and rear, hinged lid for the toolbox on the turntable platform, 4 lashing eyes on each side, 6 pairs of mechanical folding outriggers for 3 m total width, widening boards stored in the center of the loading area, hydraulically operated two-section loading ramps, movable sideways, loading area above the turntable: approx. 2,000 x 2,520 mm, loading height approx. 1,070 mm, rear loading area: approx. 6,500 x 2,520 / 3,000 mm, loading height approx. 910 mm (incl. 860 mm drive-up slope), technically permissible gross vehicle weight: 30,000 kg, vehicle is hot-dip galvanized and as new. = Further Information = Weights Payload: 24,000 kg gross vehicle weight (GVW): 6,000 kg Dedpfxsyz Ix Rs Aidjuu Maintenance, History and Condition Number of previous owners: 1 Technical condition: very good Visual condition: very good Additional Information Tyre condition front: 90 Tyre condition rear: 90 Front tyres: 235/75 R 17.5 Rear tyres: 235/75 R 17.5 Country of manufacture: DE Further Information Please contact Bernd Strack for more information.

Stav: použitý, maximálna hmotnosť nákladu: 7 100 kg, celková hmotnosť: 10 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2007, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 450 mm, výška ložného priestoru: 1 100 mm, celková šírka: 2 550 mm, Vozidlo / Nadstavba: Tandemový trojstranný sklápací vozík Prvá registrácia: 07/07 Celková hmotnosť: 10.000 kg Prevádzková hmotnosť: 2.900 kg Dedpfjyz H Azex Aideuu Užitočné zaťaženie: 7.100 kg Celková dĺžka: 6.900 mm Dĺžka ložnej plochy: 5.000 mm Šírka: 2.550 mm / Šírka ložnej plochy cca 2.450 mm Výška ložnej plochy: cca 1.100 mm Ďalšie informácie - 40 km/h - 500 mm bočnice - 500 mm pozinkovaný predný nadstavec - 7 párov kotviacich ok na ložnej ploche - 4 páry kotviacich ok pod nadstavbou zvonka - Podperná noha - Zadná podpera - Pružina na zdvíhanie bočnice - Nástupné rampy voliteľné za 1.280,00 €

Stav: použitý, maximálna hmotnosť nákladu: 19 800 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2019, Výbava: ABS, * Müller Mitteltal 3-nápravový príves pre abroll kontajnery Duodpfeyx R Enox Aidou * Typ TM 2 24 * Pre dva abroll kontajnery od 7 do 10 m³ * Zaistenie nákladu len dvoma reťazami na každý kontajner * Dvojitá pneumatika 265/70 R19,5 * Vzduchové odpruženie * Nápravy BPW * Otočný oje pneumaticky sklopiteľné s pneumatickým odistením * 8 UVV kotviacich ôk 5t na upevnenie upínacích prvkov * 8 preklápateľných dorazov kontajnerov na bočné centrovanie * EBS * Technicky prípustná celková hmotnosť 27 000 kg

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles Dusdsl Tihuspfx Aidju * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) Dujdpfsxptn Dex Aideu ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT Veľmi dobre udržiavaný tandemový valníkový príves ZANDT Cargo * TAT B 110 * Valník * Spevnená drevená podlaha * Záťažové upevňovacie koľajnice * Dvojosý tandem * Široké pneumatiky * Nastaviteľné ťažné oje * Celková povolená hmotnosť 11 900 kg * Veľmi dobrý stav Možný protiúčet Financovanie od 3,99% Duodpfjymuz Uox Aidou Chyby a predaj vopred vyhradené! Údaje v tomto inzeráte sú nezáväzné a neslúžia ako garantované vlastnosti. Predávajúci nepreberá zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné osobitne preveriť. Všetky údaje v inzerátoch sú nezáväzné! Doručenie v rámci celej SR na požiadanie Otváracie hodiny: pondelok až štvrtok od 9:00 - 17:00 h, piatok od 9:00 - 14:00 h a podľa dohody!

Stav: použitý, maximálna hmotnosť nákladu: 9 400 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2020, dĺžka ložného priestoru: 6 300 mm, šírka ložného priestoru: 2 480 mm, Interné číslo: ZANDT veľmi dobre udržiavaný tandemový plošinový príves Duodpfjymuz Ijx Aidou ZANDT Cargo * TAT B 110 * plošina * zosilnená drevená podlaha * uchytenia pre ťažké náklady * tandem s 2 nápravami * široké pneumatiky * nastaviteľné oje * celková prípustná hmotnosť 11.900 kg * veľmi dobrý stav Možná výmena protiúčtom Financovanie od 3,99 % Možné chyby a predaj vopred vyhradený! Údaje v tomto inzeráte sú nezáväzné popisy a neslúžia ako zaručené vlastnosti. Predajca nepreberá žiadnu zodpovednosť za chyby v písaní alebo prenose údajov. Uvedené vybavenie je potrebné overiť samostatne. Všetky údaje v inzerátoch sú nezáväzné! Doručenie po celom Nemecku na požiadanie Otváracie hodiny: Pondelok až štvrtok 9:00-17:00 Piatok 9:00-14:00 a po dohode!!!

Stav: použitý, maximálna hmotnosť nákladu: 14 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2010, ďalšia kontrola (TÜV): 05/2025, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, celková výška: 1 300 mm, Rok výroby: 2010, Výbava: ABS, MÜLLER MITTELTAL RA18 Trailer for hook-lift containers with external rollers 5,500 mm – 7,000 mm German trailer, second owner Technical Data Suitable for hook-lift containers with external rollers, in lengths of 5,500–7,000 mm (internal length), for rear loading. Weights: - Gross vehicle weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40-70% tread remaining Features: - ABS/EBS socket according to ISO 7638 (5- or 7-pin) - Main chassis frame with raised outer rails to guide the roll-off containers, hot-dip galvanized - Container locking system: The container is secured by 2 pneumatic cross-clamping units at 4 points. After sliding the container onto the trailer, the 4 locking claws are engaged via a valve, fixing the container against the chassis frame. - Additional front securing via 2 plug-in pieces (with empty holder), insertable in various positions along the guide rails. - 2 x 9t BPW axles, 420 mm drum brakes, with air suspension units - Air suspension with lowering function - Steel welded chassis construction - 2-line braking system in accordance with EC EBS regulation - DUOMATIC coupling head - Spring-loaded parking brake - 24 V electrical system - Multi-chamber lighting - 15-pin connector with cable - Lighting according to EC regulations - Factory silver rims - Aluminium underrun protection Dsdpfovg T Nyjx Aidsuu - Chocks with holder - 1/2 shell plastic mudguards - Toolbox (approx. 800 x 300 x 500) Condition corresponding to age and mileage! Delivery available at extra cost. All information provided without guarantee! Sale to businesses or export only! ATTENTION: PRICE IS NET PLUS VAT Deutsch, English: JOSEF WhatsApp: We speak the following languages: Deutsch, Czech, Polski, Romanian, Russian, English

Stav: použitý, číslo stroja/vozidla: GE11/142/2022, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 08/2008, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 500 mm, zavesenie: vzduch, Veľmi dobre zachované vozidlo od prvého majiteľa Trojosý prejazdný nízkoložný príves Nízkoložný príves s nájazdovou rampou Dedpon Aw Hkjfx Aideuu Ťažká preprava Typ T3 Komakt 30,0 Dĺžka 8500 mm Šírka 2500 mm Vzduchové odpruženie Obchodno/exportná netto cena – 15 990 € Zmeny, medzi-predaj a omyly vyhradené ===== Telefón 2 Mobil =====

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2005, farba: čierny, Rok výroby: 2005, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Náprava s dvojitými kolesami - Rezervné koleso = Ďalšie informácie = Dedpfxjxw T Uaj Aidjuu Hrubá hmotnosť: 8.900 kg Užitočné zaťaženie: 26.100 kg CELKOVÁ HMOTNOSŤ: 35.000 kg Predajná cena: € 18.000, US$ 21.210