Müller-Mitteltal Tm2 18,0 L kúpiť použité (51 372)

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing-steered with electro-pneumatic steering lock ----Suspension: Nsdpfx Aey Ngzyebtoda * Air suspension with raising and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info-tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel sheet mudguards * Spare wheel carrier mounted on the right side under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Chequer plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to a total width of 3 m, not included in the rear slope (extension planks available stored on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lash Package): * On the saddle platform: 2 x 6.3 t lashing points each, and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and retractable, integrated in the outer frame * Per side: 2 x 6.4 t lashing eyes, plus 1 lashing point in the excavator arm trough at the rear * 2 x container locks directly behind the gooseneck in the low-bed platform ----Excavator Arm Trough: * Continuous excavator arm trough from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for optional future customer retrofitting for hydraulic ramp adjustment * The outer board of the access ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump performance in the truck over 40 l up to 120 l/min) ----Loading Dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, access ramps, rear fold-down supports, widening consoles hot-dip galvanized * Axles, landing gears, air tanks painted in black shade * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show e

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release unit for spring brake cylinders * Drum brakes ----Axles: Nsdpeykx Nkjfx Abteda * 3 x 11 t BPW axles * Traction aid for shunting purposes activated on the first axle via EBS (no installation required on the truck) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing steering axle for shunting purposes controlled from the driver's cab via EBS (no installation required on the truck) ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Smart-Board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lamps with turn signal control * Tire pressure monitoring with option to display in the truck via EBS signal (no installation required on the truck) ----General Attachments: * Side underrun protection * Landing gear at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Pivoting arm as a carrier for connection lines from truck to semi-trailer ----Lowbed Area: * 2nd kingpin position * Saddle platform with 45° chamfered front corners, and a front toolbox made of galvanized, powder-coated steel sheet, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides (in custom RAL color) on the sides of the saddle platform, foldable and removable * Rear wall inserted at 150 mm height * Rear chamfer on the saddle platform towards the lowbed, approx. 700 mm long with checkered plate surface, with a perforated strip at the end for hanging aluminum approach ramps * Saddle platform with 50 mm clamped wood planks and lowbed platform with 60 mm clamped wood planks * Tread plate above the axles * 9 mechanical folding extensions to a total width of 3 m (not on the rear chamfer; extension planks provided with closed storage compartment mounted transversely under the loading platform) * Preparation for 3 mounting shafts under the saddle platform for storing optional aluminum approach ramps or wood planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing points (2 t lashing force per point at minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the saddle platform, 1 on the longitudinal beams after the step, and 1 above the center axle next to the longitudinal beam) Lowbed Platform: * 3 x 13.4 t lashing rings on the outer frame per side (at the step-down from the saddle platform, at the start and end of the ramp slope) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between the 2nd and 3rd axles) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle over steering axle up to the end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D (incomplete

Stav: nový, maximálna hmotnosť nákladu: 30 440 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40,0 ----Brzdy: * Wabco EBS-E (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové akumulátorové valce * Bubnové brzdy ----Nápravy: * 4 x 11 ton, nápravy Gigant ----Zavesenie: * Vzduchové odpruženie s hydraulickým zdvíhacím a spúšťacím systémom a ventilom RtR Ndodeylfvmjpfx Abtja ----Očkový ťah: * Priamy očkový ťah s 50 mm očkom a plynulo nastaviteľnou výškou ----Elektrická inštalácia / Osvetlenie: * Systém monitorovania tlaku v pneumatikách s možnosťou zobrazovania na displeji nákladného vozidla prostredníctvom signálu EBS – bez inštalácie na strane nákladného vozidla. * SmartBoard ako informačný nástroj s tlakovými senzormi pre zobrazovanie zaťaženia nápravy pre každú nápravovú skupinu * 15-pólová zásuvka * LED zadné svetlá * LED obvodové svetlá (odnímateľné) vzadu ----Všeobecné montážne diely: * Balíky výstražných tabúľ vpredu a vzadu * 2 x náradie v skrinkách z pozinkovanej – práškou lakovanej – oceľovej dosky, cca 650 x 300 x 600 mm, bočne vpravo * Vpredu plný plastový samostatný blatník * Vzadu priamy oceľový blatník, každý s ochranou proti striekajúcej vode (potlačenie striekajúceho spreju) * Bočná ochrana proti nárazu ----Ložná plocha: * Predná časť otočnej plošiny predĺžená o 520 mm s 45° rohmi a 3 zapustenými úložnými priehradkami vrátane veka a možnosťou uzamknutia * Podlaha nad otočnou plošinou z 50 mm a v ložnej plošine z 60 mm mäkkého dreva * Gumová vrstva 20 mm namiesto drevenej podlahy v jazdnej dráhe s dĺžkou ložnej plošiny 6 780 mm vrátane nájazdovej rampy * Gumová vrstva na nájazdovej rampe vľavo a vpravo, cca 860 mm dlhá * Na každej strane 4 držiaky na nosníky (ale nosníky nie sú súčasťou) so súčasnou možnosťou upevnenia záťaže 2 tony ----Podvozok: * Podvozok z vysoko pevnej jemnozrnnej ocele ----Zabezpečenie nákladu (balík Lasi): Otočná plošina: * 2 páry 13,4 tonových očiek na upevnenie v vonkajšom ráme otočnej plošiny Ložná plocha: * Na každej strane 4 páry 10 tonových očiek na upevnenie vo vonkajšom ráme, spustiteľné a zaťažiteľné vo všetkých smeroch * Na každej strane vzadu 2 páry 13,4 tonových očiek na upevnenie, otočných ----Rampy: * Gumová vrstva na sklopných nájazdových rampách * Hydraulické sklopné rampy s hydraulicky výsuvnou špicou, cca 4 650 x 720 mm * Hydraulické bočné posúvanie rampy a ventily pre zaistenie nákladu ----Zadná podpera: * Hydraulická zadná podpera ----Rozšírenie: * 8 párov pozinkovaných sklopných oporníkov pre celkovú šírku 3 metre (ale nie v zadnej rampe) * Rozširovacie dosky uložené bočne vľavo v úložnom priestore ----Ukladacie miesto pre výložník rýpadla: * Ukladacie miesto pre výložník rýpadla nad zadnou nápravou až po koniec nájazdovej rampy, cca D=2 100 mm x Š=740 x H=190 mm * 2 páry 6,4 tonových očiek na upevnenie na bočnej strane v ukladacom priestore pre výložník rýpadla ----Hydraulika: * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákladnom vozidle vyššom ako 40 – max. 120 l/min) ----Rozmery ložnej plochy: * Zadná ložná plocha: cca 6 780 x 2 520 mm (vrátane 860 mm nájazdovej rampy) * Ložná plocha nad otočným krúžkom: cca 2 990 x 2 520 mm ----Výška ložnej plochy: * Naložené, cca 890 mm, +/- 20 mm ----Lakovanie: * Bočné a zadné reflexné kontúrové pásy * Podvozok, otočná plošina, nájazdové rampy a sklopné oporníky, žiarovo pozinkované * Nápravy, očkový ťah, vzduchový kotol a otočný krúžok, natreté čiernou farbou ----Informácie: * Nové vozidlo so zárukou výrobcu * Chybné informácie a medzivýpredaj s

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck dashboard via EBS signal - no truck-side installation required - * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° edged, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Installation of 3,000 kg drop lashing brackets possible at approx. 600 mm intervals - delivery includes 12 units of 3,000 kg side lashing brackets per side * 5 pockets per side for pipe stanchions 100 x 50 mm in the outer frame - stanchions not included in delivery * 30 mm phenolic plywood floor ----Drum Mounts: * 3 galvanized drum mounts secured with container locks, with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max drum diameter 2,600 mm and max drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * 6,000 kg maximum drum weight per cable drum support Nsdox Nli Nopfx Abteda * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotating ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, rear underrun protection hot-dip galvanized * Axles painted in black ----Information: * Technical upgrade to 30 t gross weight possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 51 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA-Kombi 18.0: * 3 in 1 = suitable for roll-off containers, skip containers, and as a low-loader ----Braking System: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: Ndjdpjl Thv Rjfx Abtea * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm length * 40 mm drawbar eye and height adjustment device ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (tyre pressure monitoring), available display in truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with splash guards * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact buffer * Mechanical drop supports at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel deck with recessed rollers in the bogie area * Roll-off container transport: container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanically insertable front stop angles in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 repositionable skip clamps for side-centering the skips, front 4 skip clamps are insertable and fitted with a pendulum stop * Weld seam as anti-slip coating in the ramp track area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and friction-locked securing of the skips * 4 lashing cleats per side in cloverleaf design * 1 pair of 13.4 t UVV lashing rings towards the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight of technically 20,000 kg * New vehicle with manufacturer's warranty * Errors and interim sale reserved ----Delivery Time: * Available from approx. week 44 / 2026

Stav: nový, maximálna hmotnosť nákladu: 13 500 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TRA-Kombi 18.0: * 3 in 1 = suitable for roll-off containers, skip containers, and as a low-loader ----Braking System: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System), readout possible in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box, made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact buffers * Mechanical rear drop-down supports ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanically pluggable stop angles at the front on the runway, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 removable skip stops for lateral centring, front 4 skip stops with oscillating stops * Weld bead as anti-slip coating in the ramp area Ndedpfxel Thwce Abtoa ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for securing skip containers by positive and non-positive fastening of tensioning elements * 4 lashing profiles on each side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminium approach ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment, accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible total weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 44/2026

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----General attachments: * Jost mechanical landing gear (front) * Rear: 2 mechanical, hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin electrical connector * LED lighting * TPMS tire pressure monitoring system ----Tipper body: * Mesh hooks to the side and rear in the central locking housings, plus 2 on the front wall * Steel pallet – 3-way tipper body (continuous side walls – without center stanchions – drop sides fitted with drop-side spring-assisted lift) * Rear stanchions bolted * Combined steel rear swing doors, asymmetrically split, 2-leaf, can be swung open and locked at 270°, not foldable – with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rotating bar lock and central locking * Deactivation function for automatic rear door operation when tipping backwards with open swinging doors * 4 mm steel floor plate * Rear ramp carrier for loading ramps ----Load securing: Nedpfx Abjl Thyxetsda * Each corner: 1 x 5 t lashing point * Sides: 4 x 3 t lashing rings integrated into outer frame per side ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment under the load area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper platform, rear stanchions, underrun protection, mechanical drop supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in other RAL colors for an extra charge * Axles, springs, flange eye, air reservoir and landing gear painted black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, includes manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf (A7 motorway)

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood Ndjdpfjl Tphrjx Abtsa * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: Nodpfoxptn Dex Abteda * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment Nodsl Tihuepfx Abtjda ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) Nedpsl Tnvgofx Abtsda * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: ----Brzda: * Brzdový systém EBS * Bubnová brzda * Núdzové odblokovanie pre pružinové valce ----Náprava: * Náprava BPW Njdeu I Iqfjpfx Abtjda ----Pruženie: * Parabolické listové pružiny ----Ťažné zariadenie / Prírubové oko: * Ťažná tyč s 40 mm skrutkovacím ťažným okom (výškovo nastaviteľné mm) ----Elektrická výbava / Osvetlenie: * 15-pólová elektrická zástrčka * LED osvetlenie * Blikajúce LED bočné obrysové svetlá * Systém monitorovania tlaku v pneumatikách RDÜ ----Všeobecné príslušenstvo: * Predná podperná kladka * Zadné podpery zo štvorhrubých rúr s pružinovou asistenciou, s podložkou a bezpečnostným kolíkom pre rôzne výšky podpery * Uzavreté blatníky z oceľového plechu s ochranným krytom proti striekajúcej vode * Uzavretá bočná ochrana využiteľná ako reklamná plocha * Plastová náradová skrinka s podlahovou vložkou (montovaná naležato), cca 500 x 350 x 400 mm ----Nadstavba: * Otočná nadstavba pre káblový bubon, svetlá šírka medzi ramenami 1 700 mm, so západkou na zabezpečenie bubna na koncoch nosných ramien, so stredovým západkovým zámkom pre aretáciu nadstavby s podvozkom * Motor-hydraulický pohon bubna s olejovým motorom * Ventily a posuvné poháňané kladky s gumovým povrchom * Hydraulický regulátor rýchlosti a brzda pre pohon bubna * Oceľová os bubna s priemerom 76 mm, centrovaním a otočnými koncami * 1 pár centrovacích kužeľov z polyamidu, odstupňované ----Podvozok: * Podvozok z vysoko odolných štvorcových rúr a priečnych nosníkov ----Čerpadlová jednotka: * Hydraulická čerpadlová jednotka s benzínovým motorom Loncin vrátane ručného a elektrického štartéra * Palivová nádrž a ručný štartér * 13 k * so zubovým čerpadlom (150 bar) ----Pneumatiky: * 315/80 R 22,5 ----Pohotová hmotnosť: * Pohotová hmotnosť 2 690 kg ----Lak: * Vozidlo je žiarovo pozinkované ----Ďalšie informácie: * Nové vozidlo s plnou zárukou výrobcu * Možnosť chýb a medzipredaja vyhradená ----Doba dodania: * dodanie od cca 41. týždňa/2026

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – Ndsdpfx Aexf Skpsbtoa ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 360 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2025, * ETÜ-TA-ER 14.4: ----Brzda: * Elektronický brzdový systém EBS * Nouzové odjištění pružinových válců * Bubnové brzdy ----Nápravy: * Nápravy Gigant ----Odpružení: * Vzduchové odpružení se zvedacím a spouštěcím zařízením ----Tažná oj / tažné oko s přírubou: * Tažná oj výškově nastavitelná o 300 mm * 40mm tažné oko s přírubou ----Elektroinstalace / Osvětlení: * RDÜ (monitorování tlaku v pneumatikách s možností zobrazování v nákladním vozidle přes signál EBS bez instalace na straně nákladního vozidla) * LED světelná soustava * 15-pólová el. přípojka ----Obecné přídavné díly: * Přední podpěrná noha Jost * Zadní sklopné podpěrné nohy, žárově zinkované, namontované zvenčí * Plastová schránka na nářadí vpředu vpravo zvenčí na čelní stěně * Boční ochrana proti podjetí * Plastové čtvrtkové blatníky ----Nízkoložná plocha: * Podlaha z jehličnatého dřeva tl. 50 mm * Příprava pro dodatečnou montáž uzamykacích zařízení pro 20" kontejnery vpředu i vzadu * Šroubovaná čelní stěna z hladkého plechu * Sklopné bočnice z trapézového ocelového plechu s plynovou vzpěrou * Šroubované zadní sloupky, žárově zinkované ----Zajištění nákladu: * Perforovaný vnější rám ohnutý cca 45° s upínací silou 2 t každých 480 mm * Možnost instalace sklopných úchytných ok s nosností 3 t každých 600 mm * V každém rohu vpředu a vzadu vždy 1x úchyt 6,3 t * V čelním a koncovém nosníku různé otvory pro úchyty 1,2 t Ndsdpfx Ajndpn Sobtja ----RAMPY: * 1 pár nájezdových hliníkových ramp cca 3 310 x 400 mm (nosnost 8 t / pár), vhodné pro pneumatiková i pásová vozidla, uložené vzadu pod ložnou plochou v rámu ----Lakování: * Podvozek, tažná oj, čelní stěna a zadní stěna - žárově zinkováno * Celé vozidlo žárově zinkováno ----Informace: * Nové vozidlo s tovární zárukou * Chyby a mezitímní prodej vyhrazeny ----Doba dodání: * ihned k dodání z Egestorfu

Stav: nový, maximálna hmotnosť nákladu: 30 440 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, T 4 Profi 40,0 ----Brzdy: * Wabco EBS-E (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové akumulátory * Bubnové brzdy ----Nápravy: * 4 x 11 tonové nápravy Gigant ----Zavesenie: * Vzduchové odpruženie s hydraulickým systémom na zdvíhanie a spúšťanie a ventilom pre automatické vyrovnávanie výšky ----Očkové ťažné zariadenie: * Priame očkové ťažné zariadenie s 50 mm čapom a plynulo nastaviteľnou výškou ----Elektrická inštalácia / Osvetlenie: * Systém monitorovania tlaku v pneumatikách s možnosťou zobrazenia na displeji nákladného vozidla prostredníctvom signálu EBS – bez potreby inštalácie na strane nákladného vozidla * SmartBoard ako informačný nástroj s tlakovými senzormi pre zobrazenie zaťaženia nápravy pre každú nápravovú skupinu * 15-pólová elektrická zásuvka * LED koncové svetlá * LED obrysové svetlá (odnímateľné) vzadu ----Všeobecné montážne diely: * Balíky výstražných tabúľ vpredu a vzadu * 2 x náradie boxy z pozinkovanej práškovej ocele, približne 650 x 300 x 600 mm na pravej strane * Predná celistvá plastová ochranná kapotka blatníka * Zadné priame oceľové ochranné kryty blatníkov, každý s ochranou proti striekajúcej vode (zabraňuje rozptylu vody) * Bočná ochranná lišta ----Nízko podlažná plošina: * Predná časť otočnej plošiny predĺžená o 520 mm s 45° rohmi a 3 zapustenými úložnými priehradkami vrátane veka a možnosťou uzamknutia * Podlaha nad otočnou plošinou z 50 mm a v nízko podlažnej plošine z 60 mm ihličnatého dreva * Gumová podlaha 20 mm namiesto drevenej podlahy v jazdnej oblasti s dĺžkou nízko podlažnej plošiny 6 780 mm vrátane rampy * Gumová podlaha na rampe vľavo a vpravo, dĺžka približne 860 mm * Na každej strane 4 úchytné body pre nosníky (ale žiadne nosníky nie sú súčasťou) s možnosťou upevnenia záťaže do 2 ton * súčasne ----Podvozok: * Podvozok z vysoko pevnej jemnozrnnej ocele ----Upevňovanie nákladu (balík Lasi): Otočná plošina: * 2 páry 13,4-tonových úchytných bodov vo vonkajšom ráme otočnej plošiny Nízko podlažná plocha: * Po stranách, vždy 4 páry 10-tonových úchytných bodov vo vonkajšom ráme, vysúvateľné a zaťažiteľné v každom smere * Vzadu po stranách, vždy 2 páry 13,4-tonových úchytných bodov, otočných Ndodsylfvgjpfx Abtja ----Rampy: * Gumová podlaha na sklopných rampách * Hydraulické sklopné rampy s hydraulicky vysúvateľnou prednou časťou, približne 4 650 x 720 mm * Hydraulické bočné posúvanie rampy a ventily pre udržanie nákladu ----Zadná opora: * Hydraulická zadná opora ----Rozšírenie: * 8 párov pozinkovaných výsuvných opier pre celkovú šírku 3 metre (ale nie na zadnej rampe) * Rozšírovacie dosky uložené na bočnej strane vľavo v úložnom priestore ----Úložný priestor pre lyžicu rýpadla: * Úložný priestor pre lyžicu rýpadla nad zadnou nápravou až po koniec rampy, približne D=2 100 mm x Š=740 x V=190 mm * 2 páry 6,4-tonových úchytných bodov na bočnej strane v úložnom priestore pre lyžicu rýpadla ----Hydraulika: * Hydraulický rozdeľovač prietoku v prívese (pri hydraulickom výkone čerpadla v nákladnom vozidle nad 40 – max. 120 l/min.) ----Rozmery ložnej plochy: * Zadná ložná plocha: približne 6 780 x 2 520 mm (vrátane 860 mm rampy) * Ložná plocha nad otočným krúžkom: približne 2 990 x 2 520 mm ----Výška ložnej plochy: * S nákladom: približne 890 mm, +/- 20 mm ----Lakovanie: * Reflexné bočné a zadné olemovanie * Podvozok, otočný krúžok, rampy a výsuvné opory sú žiarovo pozinkované * Nápravy, očkové ťažné zariadenie, vzduchový zásobník a otočný krúžok sú natreté čiernou f

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Ndodpfoy Ngz Hsx Abtsa * 3 x 11 t BPW Eco Plus axles * Rear axle with trailing steering, electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED warning beacon at the rear left ----General Accessories: * Side underrun protection * Support cranks at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the chassis, right side ----Lowbed Platform: * Fifth wheel platform with 45° beveled front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white), hinged and removable on the fifth wheel platform * Rear wall - 150 mm - slotted in * Rear ramp on the fifth wheel platform, approximately 700 mm long, into the lowbed * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Checker plate above the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width; not present on the rear ramp (extension boards provided with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages at the front and rear ----Load Securing (Load Securing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings each and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and retractable, integrated in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the lowbed platform ----Excavator Arm Recess: * Excavator arm recess continuously from the end of the last rigid axle over the steering axle to the end crossbeam with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve block for future customer retrofitting of hydraulic ramp shift * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the ramp slope * Rubber on the ramp and ramp slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm ramp slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear folding supports, extension mountings hot-dip galvanized * Axles, support cranks, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment not included in the offered vehicle * Sample images ----

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts Ndjdpfx Abexf Skvstea * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External fold-down supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards Njderwc R Ajpfx Abtoda ----Low Loader Platform: * 50 mm softwood floor * Pre-installation in front of the bulkhead for subsequent fitting of container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side boards with spring lifting assistance ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring each in the front and rear corners * Various holes in the front and rear end crossmembers for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (centered), for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical support legs and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear and flange drawbar eye painted in black * Side boards painted in RAL 9010 pure white * Painting of the side walls in a RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures ----Delivery Time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 850 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2024, * KA-TA-R 11.9 “Masterline” ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange eye ----General Accessories: Nsdpfx Ael Thymjbtoda * Jost mechanical landing gear, front * Two mechanical hot-dip galvanized drop legs, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 2 on the front wall * Steel pallet three-way tipper body (continuous side walls without center posts, drop-side walls with hinge spring assist) * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, opening up to 270°, lockable, non-folding, with additional swinging frame for automatic tailgate opening during tipping process. Locking by galvanized rotary rod latch and central locking. * Deactivation for automatic rear door function when reverse tipping with open wing door * 4 mm steel plate floor * Rear mounting rail for drive-on ramps ----Load Securing: * Each corner with 1 x 5 t lashing ring * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading floor at the rear, integrated in the chassis ----Paintwork: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, mechanical drop legs hot-dip galvanized * Side panels and tailgate painted in RAL 9010 pure white * Custom RAL color for side panels available at extra cost * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex-warehouse Egestorf on the A7

Stav: nový, maximálna hmotnosť nákladu: 6 870 kg, celková hmotnosť: 9 900 kg, konfigurácia náprav: 1 náprava, Rok výroby: 2026, * KWH 9,9 ML: ----Brzda: * Brzdový systém EBS * Bubnová brzda * Núdzové odistenie pružinových valcov ----Náprava: * Náprava BPW ----Pruženie: * Parabolické pružiny ----Ťažné oko/Ťažná tyč: * Ťažná tyč s 40 mm skrutkovacím ťažným okom (výškovo nastaviteľné mm) ----Elektrika/Osvetlenie: * 15-pólová elektrická zásuvka Nedpou I Iqrefx Abtsda * LED osvetlenie * Blikajúce LED bočné obrysové svetlá * Systém monitorovania tlaku v pneumatikách RDÜ ----Všeobecné prídavné diely: * Predná podpera * Zadné štvorcové trubkové podpery podporované pružinou s základovou doskou, bezpečnostné zaisťovacie čapy pre rôzne výšky podpery * Uzavreté blatníky z oceľového plechu s ochranou proti striekajúcej vode * Uzavretý bočný ochranný panel využiteľný ako reklamná plocha * Plastová náradieová skrinka s vloženým dnom (vodorovná montáž) cca 500 x 350 x 400 mm ----Nadstavba: * Výkyvná konštrukcia na navijak káblov, svetlá vzdialenosť medzi ramenami bubna 1 700 mm s upínacím uzáverom na zaistenie bubna na koncoch ramien a aretáciou konštrukcie k rámu vozidla pomocou stredového pazúrového zámku * Motor-hydraulický pohon bubna s olejovým motorom * Ventily a posuvné hnacie valčeky s gumovým povrchom * Hydraulický regulátor rýchlosti a brzda pre pohon bubna * Oceľová hriadeľ bubna s priemerom 76 mm so strediacimi a otočnými koncami * 1 pár centrovacích kužeľov z polyamidu so stupňovitým vyhotovením ----Rám podvozka: * Rám podvozka z torzne tuhých štvorcových rúrok a priečnych nosníkov ----Čerpacia jednotka: * Hydraulická čerpacia jednotka s benzínovým motorom Loncin vrátane ručného a elektrického štartéra * Palivová nádrž a ručný štartér * 13 HP so zubovým čerpadlom (150 bar) ----Pneumatiky: * 315/80 R 22,5 ----Pohotovostná hmotnosť: * 2 690 kg pohotovostná hmotnosť ----Lak: * Vozidlo je žiarovo pozinkované ----Informácie: * Nové vozidlo s plnou zárukou výrobcu * Chyby a medzipredaj vyhradené ----Dodacia lehota: * K dispozícii približne od 41. týždňa 2026

Stav: nový, maximálna hmotnosť nákladu: 37 560 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * TS 3 RM ML 30.0: ----Braking System: Ndsdpfx Aeykx Nqsbtsa * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the driver’s cab for shunting purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering device as well as Ride-Height Control (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General Accessories: * Lateral underrun protection * Support legs at the front and swing-type supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as holder for connection lines from truck to trailer ----Low-bed Platform: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanised, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * 400 mm high aluminium drop sides on the fifth-wheel platform (painted in desired RAL colour), foldable and removable * Rear wall -150 mm- inserted * Rear incline on the fifth wheel platform to the low bed, approx. 700 mm long with chequer plate surface and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm thick clamped wooden planks and low-bed platform with 60 mm thick clamped wooden planks * Tear plate over the axles * 9 x mechanical flip-out extensions to a total width of 3 m, but not on the rear slope (widening boards provided with enclosed storage compartment across the direction of travel under the loading area) * Prepared for 3 mounting shafts under the fifth wheel platform for storage of either aluminium loading ramps or wooden planks for wheel recess covers * Prepared for container locks on the gooseneck ----Load Securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing capacity per lashing point at a distance of min. 480 mm) * 3 x 13.4 t lashing rings sunk into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the step of the fifth wheel platform, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, continuous from the end of the last rigid

Stav: nový, maximálna hmotnosť nákladu: 17 650 kg, celková hmotnosť: 24 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 230 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2026, * TP 30.0 with 3 cable drum supports ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raising and lowering system ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck's display via EBS signal -without installation on the truck side- * 15-pin power socket * 2 additional LED reverse lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Stainless steel side toolbox, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, with hole pattern for lashing devices; lashing force per lashing point 2,000 kg at 480 mm intervals * Option to install 3,000 kg drop-in lashing rings at approx. 600 mm intervals - 12 x 3,000 kg lashing rings included per side * 5 pockets per side for 100 x 50 mm pipe stakes in the outer frame - stakes not included in delivery * 30 mm phenolic plywood floor ----Cable Drum Supports: * 3 galvanised cable drum supports, secured with container locks, with side forklift pockets spaced 800 mm centre/centre (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per support: 6,000 kg * No drive or drum brake Ndjdpfxox Nlkaj Abtea * Support arm with tension lock for securing the drum axle * 76 mm diameter steel drum axle, centred, with rotating ends * 2 locating rings * 2 polyamide centring cones * 4 x 3.2 t lashing eyes on support arms for customer lashing to prevent drum rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection: hot-dip galvanised * Axles painted in black

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ - TA -R 14,4 ----Brzdy: * EBS brzdový systém * Nouzové uvolňovací zařízení pro pružinové brzdové válce * Bubnové brzdy ----Náprava: * 2 x 7 t Gigant nápravy Ndjdpfxsx Ipapo Abtoa ----Odpružení: * Parabolické pružiny s vyrovnávací jednotkou ----Tažná tyč / Flanšová oko: * Výškově stavitelná tažná tyč v rozsahu 300 mm - prodloužení tažné tyče o 250 mm na 2.250 mm * 40mm flanšová oj ----Elektrika / Osvětlení: * Systém monitorování tlaku v pneumatikách s možností zobrazení v nákladním vozidle přes EBS signál (bez instalace na straně nákladního vozidla) * 15-pólová elektrická zásuvka * LED koncová světla 12 / 24 V * Odnímatelné zadní LED výstražné majáky ----Obecné přídavné vybavení: * Opěrná klika vpředu * Vnější žárově zinkované sklopné podpěry vzadu * Plastová skříňka na nářadí cca 858 x 500 x 500 mm přední pravá vnější část čela * Boční ochrana proti najetí * Plastové čtvrtkryty kol ----Nízkoložná plošina: * Příprava před čelem pro dodatečnou montáž kontejnerových uzávěrů * Šroubované čelo z hladkého plechu * Sklopné bočnice z ocelového vlnitého plechu s plynovými vzpěrami * Zadní ocelová stěna zasouvatelná mezi rampy - držák pro nevyužité uvnitř před čelem * Šroubované zadní sloupky * Nájezdová šikmina vzadu cca 860 mm ----Podlaha: * 50 mm podlaha z jehličnatého dřeva * 12 mm silný a 270 mm široký gumový pruh na vnitřní straně nájezdových ramp * V nájezdové šikmině a vnější části nízkoložné plošiny (od čela po zadní příčku) vždy 12 mm silné a 210 mm široké gumové pásy ----Zajištění nákladu: * Děrovaný vnější rám ohnutý cca 45° se zajišťovací silou 2 t každých 480 mm * Možnost vestavby sklopných kotevních ok pro 3 t každých 600 mm * V rozích vpředu a vzadu vždy 1 x 6,3 t upínací oko * V čelní a zadní příčce různé otvory pro uchycení 1,2 t ----Rampy: * Jednodílné mechanické mřížové nájezdové rampy s pružinovým mechanismem pro obsluhu jednou osobou, cca 2.750 x 870 mm (sjednotitelné až na 20 mm) ----Lakování: * Podvozek, tažná tyč, čelo, zadní stěna i nájezdové rampy žárově zinkované * Nápravy, pružiny, vzduchové zásobníky a oj lakovány černým odstínem * Bočnice v barvě RAL 9010 čistě bílá ----Informace: * -- zesílená a certifikovaná konstrukce dle EN 12642 XL vč. certifikátu o zajištění nákladu -- * Změny a předběžný prodej vyhrazeny * Nové vozidlo se zárukou výrobce ----Dodací termín: Vozidlo je ihned k dispozici

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left Ndodpopk D I Asfx Abtja ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl

Stav: nový, maximálna hmotnosť nákladu: 27 940 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * Wabco-EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes Ndjdewh Hdxjpfx Abtoa * 3 x 11 t axles * Air suspension with lifting and lowering function as well as RtR valve * Maneuvering aid for shunting purposes activated on the first axle via EBS – no truck-side installation required – when the lift axle is raised + 30 mm ride height * Smart-Board as infotool mounted on trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 axle liftable * Lateral underrun protection * Front aluminium drop-down supports and rear swing-down supports on the chassis * Alcoa LVL One aluminium rims * 15-pin electrical connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 2 LED work lights mounted on trailer sides – without truck-side installation * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with display option in truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning sign packages front and rear * Straight steel wheel arches * Saddle platform with 45° beveled front corners and front toolbox made of galvanized, powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with top folding lid and side doors in the beveled corners * 400 mm high aluminium drop sides (RAL 9010 pure white) foldable and removable on the sides of the saddle platform * Rear wall -150 mm- slotted in high * Rear incline on saddle platform to lowbed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminium loading ramps * Saddle platform and lowbed deck with 50 mm clamped wooden planks * Tread plate over the axles * Preparation for 3 storage compartments under the saddle platform for optional aluminium loading ramps * Swing arm as carrier for connection lines from truck to trailer * Load securing package consisting of: perforated outer frame on saddle platform, 45° angled with hole pattern for lashing equipment (2 t lashing force per point at a min. distance of 480 mm), 2 x 6.3 t recessed lashing rings on each side in the floor, 1 x 16.5 t lashing ring on each side in the approach slope from the low-bed platform to the saddle platform, 2 pairs of 16.5 t lashing rings on low-bed platform (1 x on longitudinal members after the cranking and 1 x over the middle axle next to the longitudinal member), 3 x 13.4 t lashing rings on each side on the outer frame (1 x at the start of the saddle platform cranking, 1 x at the start of the approach slope, 1 x at the end of the approach slope), 3 x 10 t lashing rings on each side (2 x between the front wheel recess and 1st axle, 1 x between 2nd and 3rd axle), 3 x 5 t lashing rings on each side bolted to the outer frames of the wheel recesses (2 on the front and 1 on the rear wheel recess) * Extended excavator boom trough from the end of the last rigid axle over the steering axle to the rear crossmember, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 mm / Depth front 170 mm, with 2 x 6.4 t lashing rings each side in the excavator boom trough * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transport of wheel loaders with a wheelbase of 3,000 – 3,590 mm and tire diameter of 1,