Müller-Mitteltal Tandem Tieflader Etü Ta R 11,9 kúpiť použité (56 472)

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brake: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) Dkedpfx Amexptn Ds Sol * Last axle is self-steering (lockable from the cab for maneuvering purposes without truck-side installation, as well as via a switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension with lift and lowering function, with RtR valve ----Drawbar: * Drawbar, 1,500 mm long, with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED beacon (removable) at rear ----General Attachments: * Mechanical warning sign kit for 3 m width * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, mounted on the left side * Plastic mudguards front axle and galvanized steel mudguard skirts rear axle ----Low Loader Platform: * Front section of bogie platform with 45° corners and 3 storage compartments with lockable folding lids (folding rearward) * Reduction of low loader platform by 500 mm to 6,280 mm including extension of offset cranking by 500 mm forward * Rubber covering on the folding frame, drive-on slope and running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * 2 x 13.4 t UVV lashing points on each front and rear side corner * 5 x 10 t UVV lashing rings per side (swiveling, lowerable, loadable in all directions) * 4 stake pockets per side, each with a 2 t lashing option * 1 x 16 t UVV lashing ring on the rear cross member ----Extension: * Extending and folding extension beams for 3 m total width (timber carrier under the chassis on the right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section, approx. 4,650 x 720 mm, incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities from the truck of over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded 890 mm +/- 20 mm via air suspension ----Loading Platform Dimensions: * Platform above slewing ring: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Painting: * Chassis, bogie, drawbar, extension consoles, and ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in a shade of black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stav: nový, maximálna hmotnosť nákladu: 38 620 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, T5 Profile 50.0: ----Brakes: Dkedpfx Ael Tihujm Sel * Wabco EBS (electronic brake system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering without truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before driving on public roads * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering unit with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12 / 24 V * Removable rear LED beacon ----General attachments: * Mechanical warning panel package for 3 m total width * Toolbox made from galvanized steel sheet, approx. 650 x 300 x 600 mm, left side * Front axle plastic mudguards and rear axle galvanized steel mud flaps ----Low-loader deck: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable fold-up lids (lids open to the rear) * Shortening of low-loader platform by 500 mm to 6,280 mm including extended step recess by 500 mm to the front * Rubber coating on the fold-down frame, approach ramp and on the running surface of the low-loader platform * Between the longitudinal beams in front of the excavator arm rest: bamboo wood ----Load restraint (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing rings at the front and rear side corners, per side * 5 x 10 t UVV lashing rings per side (swivel-mounted, height-adjustable, loadable in all directions) * 4 stake pockets per side, each with 2 t lashing capacity * 1 x 16 t UVV lashing ring on the rear traverse ----Widening: * Telescopic and foldable extension beams for 3 m overall width (plank holder under the chassis, right side) ----Excavator stick rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral adjustment ----Rear support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump output in the truck above 40 l/min up to max. 140 l/min) ----Loading height: * Loaded: 890 mm +/- 20 mm via air suspension ----Loading area dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed deck: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, extension consoles, access ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports and air tanks painted in black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available*

Stav: použitý, konfigurácia náprav: 2 nápravy, prvá registrácia: 04/2005, farba: čierny, Rok výroby: 2005, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - Náprava s dvojitými kolesami - Rezervné koleso = Ďalšie informácie = Hrubá hmotnosť: 8.900 kg Djdpfx Amsxw T Uaj Sekl Užitočné zaťaženie: 26.100 kg CELKOVÁ HMOTNOSŤ: 35.000 kg Predajná cena: € 18.000, US$ 21.210

Stav: použitý, konfigurácia náprav: 1 náprava, prvá registrácia: 08/1993, Rok výroby: 1993, Výbava: ABS, = Ďalšie možnosti a príslušenstvo = - EBS = Ďalšie informácie = Hrubá hmotnosť: 3.700 kg Užitočné zaťaženie: 9.300 kg CELKOVÁ HMOTNOSŤ: 13.000 kg Djdpfoxt Sl Njx Am Sekl

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tyre pressure monitoring system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalisation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanised steel skirts, each with spray protection * Reflective contour tape on sides and rear * Tool box made of galvanised steel sheet, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanised) for tool box on turntable platform * Multi-voltage electrical system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 50 mm draw eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included) with simultaneous lashing option Dodpfx Aol Th I Ajm Sskl * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swivelling and retractable, loadable in all directions and recessed into the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the centre of the loading area * One-piece hot-dip galvanised hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on taper) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanised * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tyres * Unladen weight approx. 5,980 kg * Technical permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Stav: nový, maximálna hmotnosť nákladu: 23 940 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for toolbox located on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 50 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lash-down points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of bogie platform, 6 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t each * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear tapered section) * Widening planks stored in the center of the loading area * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control block for retrofitting hydraulic sideways ramp displacement * Loading platform above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Own weight approx. 5,980 kg Dkjdpfxjl Th Nnj Am Sel * Permissible gross weight of 30,000 kg technically possible * New vehicle with manufacturer’s warranty * Errors and intermediate sale excepted * Available from calendar week 11/2026

Stav: použitý, maximálna hmotnosť nákladu: 30 700 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2002, Výbava: ABS, * MüllerMitteltal 4-nápravový nízkozdvižný príves T40 * 2x riadené otočné nápravy * Nemecký príves * pero * hydraulicky posuvné rampy / vľavo-vpravo * delené sklopné rampy * možnosť rozšírenia * ABS * BPW nápravy * 40 t Dkodpfjyuri Esx Am Sel * vlastná hmotnosť: 9300 kg * zaťaženie na nápravu = 10 t na nápravu * plne funkčný * pneumatiky v poriadku

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: 3 in 1 = for roll-off containers, skip containers, and as a low loader ----Brakes: * EBS-E (Electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), display possible in truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General Accessories: Dksdpfsl Tld Iox Am Sel * Tool box made of powder-coated sheet steel * Spare wheel holder, basket design, mounted on the right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel sheet floor with roller recesses in the bogie area * For roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-way clamp locking as well as mechanically pluggable stop brackets at the front in the running rail * Transport of up to 2 skip containers with max. 10 m³ volume possible * Including 8 relocatable container stops for lateral centering, the front 4 equipped with pivotable stop * Weld bead as anti-slip coating in the running rail area of the ramp incline * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of the containers, 4 lashing bars in cloverleaf design per side * 1 pair of 13.4 t UVV lashing rings at the front * 4 x 8 t lashing lugs per side recessed into the outer frame ----Ramps: * Aluminium approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour marking strips on sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA-Kombi 18.0: Dkodpfx Amewb Rako Sjl * 3 in 1 = for roll-off containers, skip containers, and as a low-loader trailer ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinder * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display possible in truck via EBS signal (no installation needed on truck) * LED rear lights 12 / 24 V * 15-pin power connector ----General attachments: * Powder-coated steel toolbox * Basket-type spare wheel holder on the right-hand side * Enclosed side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic bumper buffer * Foldable rear A-panel ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamping lock and mechanically insertable stopper brackets at the front in the rail * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * 8 removable skip stops for lateral centering, the front 4 stops inserted with pivotable contact * Weld bead as anti-slip surface in the running area of the ramps * Mechanical drop-down supports at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching lashing elements for form-fit and friction-lock securing of the skips, with 4 cloverleaf-design lashing bars (side) * 1 pair of 13.4 t UVV lashing rings in the front * 4 x 8 t lashing eyes recessed per side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on the sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Info: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * -- Permissible total weight of 20,000 kg technically possible -- * New vehicle without first registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egstorf

Stav: nový, maximálna hmotnosť nákladu: 13 490 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 480 mm, Rok výroby: 2025, TRA Combination 18.0: 3 in 1 = for roll-off containers, skip containers, and as a low loader ----Brakes: * EBS-E (electronic braking system) * Emergency release for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm draw eye and height adjustment ----Electrics / Lighting: * TPMS (tire pressure monitoring system), display possible in truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated sheet steel * Spare wheel carrier, basket design, mounted on the right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact protection buffers * Foldable A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 - 7,000 mm possible * Pneumatic 4-way clamping lock and mechanical plug-in stop brackets at the front of the guide rail * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, the front 4 stops are plug-in with pendulum stop * Weld bead as anti-slip surface in the ramp area * Mechanical rear support legs ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the side for attaching tensioning elements to secure skips, 4 lashing brackets in cloverleaf design (per side) * 1 pair of 13.4-ton UVV lashing rings at the front * 4 x 8-ton lashing eyes recessed in the outer frame on each side ----Ramps: * Aluminum drive-on ramps (10.6 ton/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape at sides & rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight technically possible up to 20,000 kg-- * New vehicle without initial registration, comes with manufacturer's warranty * Subject to errors and prior sale Dkjdpfjl Tnwzsx Am Ssl ----Delivery Time: * Immediately available ex works Egstorf

Stav: nový, maximálna hmotnosť nákladu: 10 970 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, KA-TA-R 14,4 - Tandemový trojstranný sklápací príves pre nákladné vozidlá - Užitočná nosnosť v sérii cca: 11 050 kg - Zvýšenie celkovej hmotnosti na 14,4 t s pneumatikami 285/70R19.5 - Vnútorné rozmery: 5 000 x 2 420 x 500 mm - Výška ložnej plochy pri zaťažení: 1 040 mm - 1 podvozok s podbehovou ochranou, žiarovo pozinkované prevedenie - Lakovanie: nápravy s pružinami, vzdušník atď. v odtieni čiernej - 3 páry zapustených, vyklápacích viazacích ôk v oceľovej podlahe, LC 3 000 daN - ABS 2 S/2 M, 24 Voltov - 2 zdvíhacie pružiny pre bočnice z ocele s výškou 500 mm - 1 centrálny zámok vľavo a vpravo, výkyvný pri delených bočných stenách Doplnková výbava: 1 pár UVV viazacích krúžkov zapustených v oceľovej podlahe namiesto na povrchu podlahy 1 oceľová podlaha Hardox 450, hrúbka 4 mm Dksdpfxsxmwiyo Am Ssl Nastavenie výšky ťažného oka cez uhlovou prevodovku s kľukovým ovládaním namiesto štandardu 1 pár nájazdových rámp z hliníka bez okrajov (8,0 t/pár), 3 500 x 400 x 105 mm vhodné pre kolesové aj pásové vozidlá Box na náradie

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system as well as RtR valve * Pressure gauge for load weight determination (axles separated onto 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle with plastic quarter mudguards and splash guards * Rear axle with straight galvanized steel skirts and splash guards * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED rotating beacon at rear * 2 LED reversing lights (activated via reverse gear) * Coupling bar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: Left & right in front of the front wall support each 1 x 13.4 t UVV lashing ring, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing rings (13.4 t) hanging at the rear left & right in front of the rear support, on each side 4 pairs of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and integrated into the outer frame, 3 stake pockets on each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding supports for 3 m total width (not in the rear slope) * Board holder for extensions under the chassis on the left side in longitudinal direction * Excavator arm support above rear axle to end support, approx. 2,100 mm long and 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the arm tray * Hardwood flooring on the running surfaces of the low-bed platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the loading ramps made from hardwood * Steel construction prepared for 6-way control valves * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis Dksdpfx Ajl Tlhrsm Sol * Turntable, folding supports, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available ex stock Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4: * Wabco ABS system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 tonne Gigant axles * Parabolic suspension with tandem equalizer unit * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear Dodel Th Htspfx Am Sokl * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underride protection * Plastic quarter mudguards * Net hooks at each position of the central locking, plus 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body, continuous side panels with internal tube reinforcements, drop sides without central stanchions, foldable with side wall spring lifts * Bolted rear stanchions * Combination steel wing doors at the rear, asymmetrically split 2-wing design, can pivot and lock at 270°, not foldable, with additional pendulum frame for automatic rear wall opening during tipping operation, locking via galvanized rotary rod lock at the rear and central locking, deactivation function for the automatic rear wall function when tipping backwards with the wing door open * Each corner fitted with one 5-ton lashing point, four 3-ton lashing rings recessed into the outer frame on each side * 4 mm fine-grain steel floor plate * Rear mounting rail for loading ramps * Reinforced superstructure with load securing certificate * 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 tons per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed into the chassis below the loading surface, accessible from the rear * Chassis, drawbar, underride guard, rear stanchion and folding supports at the rear hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tyres: 285/70 R19.5 * Side panels painted to RAL 9010 pure white * Painting of side walls in other RAL colours possible at extra cost * Vehicle has a day permit (unused) * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower function and RtR valve * Manometer pressure display for payload determination (axles separated on 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel skirts with spray protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Towing eye (50 mm) with height adjustment * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front structure in front of the bogie platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the bogie platform's steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing eyes left & right in front of front wall support, 4 lateral holes each (2 t lashing force) in bogie platform, 1 pair of lashing eyes (13.4 t) suspended at the rear left & right before rear crossmember, 4 pairs UVV lashing rings (10 t) movable and lowerable, loadable in all directions and embedded in outer frame, 3 stake pockets each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding extensions for 3 m overall width (not at rear slope) * Plank holder for extensions under chassis, left longitudinal direction * Excavator arm support over rear axle to end crossmember approx. 2,100 mm long and 190 mm deep, 2 pairs each side 6.4 t lashing eyes in excavator arm support * Hardwood flooring on running surfaces of low-loader platform * Hydraulically single-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * Outer planks of loading ramps made of hardwood Djdpfx Ajl Tnu Aom Sekl * Steel construction prepared for 6-position control valve * Unladen loading edge approx. 950 mm +/- 20 mm (chassis) * Bogie, folding extensions, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, towing eye assembly painted black-- * Tyres: 235/75 R 17.5 * Vehicle has day registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 10 870 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2025, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2023, Výbava: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalization unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the front right-hand side of the chassis * 15-pin electrical plug * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter fenders Dkjdpfx Amel Th Dus Ssl * Lashing hooks located at the central locking bearings and 2 pieces at the front wall * Chassis made of fine-grain steel * Steel pallet three-way tipper body with continuous side walls, top edge reinforced with inner tubes, without center posts, side walls foldable with board wall spring lifting device * Rear posts bolted * Combination steel wing doors at rear; 2-leaf, asymmetrically split, can be swivelled and locked to 270°, cannot be folded – with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation function for automatic rear wall opening during rear tipping with open wing door * Each corner fitted with 1 x 5 t lashing point, plus 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm steel floor made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under the load floor at the rear of the chassis * Chassis, drawbar, underrun protection, rear posts, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black * Tyres: 285/70 R19.5 * Sideboard painting in RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost * Vehicle has a one-day registration (not in use) * Subject to errors and prior sale * Immediately available from Egestorf

Stav: použitý, prvá registrácia: 11/2006, Rok výroby: 2006, MÜLLER - MITTELTAL T4 Kompakt Otočný čap - Nízkozdvižný príves so vzduchovým odpružením a kolískami na kolesá - 4 x vzduchom odpružené GIGANT - nápravy - vzduchové odpruženie - 4 x kolískové lôžka na kolesá - mechanické nájazdové rampy Dksdpfxowmpbds Am Ssl - 2 zadné podpery, sklopné - výsuvné výstražné tabule - ABS - Pneumatiky MICHELIN: 235/75 R 17.5 - Ťažké prevedenie: 40.000 kg celková hmotnosť - Pohotovostná hmotnosť: 8.400 kg - Celková dĺžka: 11.750 mm - Ťažné oko: 50 mm Obzvlášť vhodný na prepravu fréz na vápno! - Nemecký príves - STK/ kontrola bezpečnosti na želanie a za príplatok možná! Možné chyby a medzi-predaj vyhradený!

Stav: nový, maximálna hmotnosť nákladu: 8 750 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2026, Výbava: ABS, zdvíhacie čelo, Číslo pre dopyty: 11599 * NOVÉ VOZIDLO - ihneď dostupné na sklade Alsdorf * všestranné využitie: stavebníctvo, záhradná a krajinárska úprava, poľnohospodárstvo a lesníctvo – použitie ako sklápač alebo podvalník Müller-Mitteltal KA-TA-R 11,9 tandemový podvalníkový trojstranný sklápací príves s nájazdovými rampami * Pneumatiky 385/55 R19,5 (4 ks), nápravy BPW, parabolické pružiny, bubnové brzdy * Systém kontroly tlaku v pneumatikách * Celková hmotnosť: 11 900 kg, užitočná nosnosť: 8 750 kg * EBS multi-napäťová inštalácia pre ťažné vozidlá s 12 V a 24 V elektrikou (napr. poľnohospodárske a lesnícke vozidlá) * Bočné obrysové svetlá s ukazovateľom smeru * LED osvetlenie 12 V + 24 V s pripojovacím káblom 1×15-pól a 1 pripojovací kábel navyše v sérii, prevedenie 12 V 13-pól s prázdnymi zásuvkami pre oba elektrické konektory * Pozinkovaná podlaha 5 m × 2,42 m, bočnice 0,5 m zvárané laserom, výkyvné, sklopné a odnímateľné, pripravené na dodatočnú montáž nástavcov bočníc * Uzamykateľný priestor pod sklápacím mostíkom na nájazdovú rampu * Vrátane hliníkových rámp, nosnosť 8 t, dĺžka 3,57 m, uložené v rampovom tuneli pod sklápačkou * Predná stena žiarovo pozinkovaná * 4 UVV upevňovacie krúžky LC 5000 daN vpredu a vzadu + 8 zapustených a sklopných kotviacich ok LC 3000 daN v podlahe sklápacieho vozidla (s vycentrovaním) * Ťažné oko plynulo výškovo nastaviteľné, žiarovo pozinkované, ťažné oko 40 mm * Hák na sieť * Prišroubované, pozinkované zadné stĺpiky * ---- * Sme obchodný partner Müller-Mitteltal! Vyžiadajte si od nás ponuku! * Príklad: 519 € bez DPH pri 60 mesiacoch bez akontácie a zostatkovej hodnoty. Ponuka nášho finančného partnera FM LeasingPartner Dkjdjyhtwwjpfx Am Sjl ----Naše otváracie hodiny: Pondelok – štvrtok: 08:00 – 17:00 Piatok: 08:00 – 15:00 Mimo otváracích hodín sme vám k dispozícii na základe dohody. Hovoríme po nemecky, hovoríme po anglicky, hovoríme po poľsky, hovoríme po francúzsky. Whatsapp Leasing, financovanie, možný výkup starého vozidla----

Stav: použitý, pohotovostná hmotnosť: 5 100 kg, maximálna hmotnosť nákladu: 12 900 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 12/1998, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 1 mm, celková dĺžka: 2 550 mm, celková šírka: 1 600 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, rázvor náprav: 5 400 mm, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, container locks, underrun protection, pneumatically adjustable drawbar, side aluminium side guard, twin tyres, storage box, removable side panels. Wheelbase: 5400 mm. Body: Trailer for hooklift containers in lengths from 6m to 6.75m. SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for insertable locking hooks, 4x pockets for insertable container centring and skip stops. The trailer can also be used as a flatbed! Aluminium side panels with a height of 600mm are included with the trailer. Loading ramps available at an additional net price of €900. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to alterations, prior sale, and errors. Dkjdpfsi Rpxwox Am Sol

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: Dksdpfxjxf Skpo Am Ssl * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles Djdjxf Skvjpfx Am Sskl ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 450 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 22 420 mm, výška ložného priestoru: 1 500 mm, Rok výroby: 2024, * KA-TA-R 11,9 Masterline: * incl. 1 m mesh side extensions * EBS braking system * Emergency release device for spring brake cylinders * TPMS (Tire Pressure Monitoring System) * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizer unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 rear mechanical hot-dip galvanized folding supports * Right-hand side galvanized steel toolbox * 15-pin electrical connector * Bolted underrun guard with LED tail lights * Plastic quarter mudguards * Mesh hooks on sides and rear in the central locking housing, plus 3 on the front wall * Hot-dip galvanized chassis * Fully galvanized steel 3-way tipper body * Continuous side walls without central stanchion, foldable, with spring-assisted drop sides * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized bolted rear stanchion * 1 x 5 t recessed and foldable lashing point at each corner, plus 4 x 3 t on each side * Lashing rings set into the outer frame, foldable * 4 mm steel floor plate * Rear ramp mounting track * Body reinforced with load securing certificate per EN 12642 XL * 1 pair aluminium loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable rear storage compartment beneath the load bed, integrated into the chassis * Tyres: 235/75 R 17.5 * Axles, springs, air tanks, drawbar and landing gear painted black * Side wall body colour hot-dip galvanized * 1 meter galvanized mesh side extensions * Sample images Djdop Ncl Sspfx Am Sokl * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex stock Egestorf, A7

Stav: použitý, pohotovostná hmotnosť: 8 680 kg, maximálna hmotnosť nákladu: 31 320 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2018, zavesenie: iný, veľkosť pneumatiky: 235/75R17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5, veľkosť zadnej pneumatiky: 235/75R17,5, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Kotviace oká, ABS, rozšírenie s výstražnými tabuľami, vozidlo sa predáva na objednávku., -- Vyhradzujeme si právo na tlačové chyby, omyly a zmeny, ilustračné obrázky --, Viac údajov na: !, More Details: ! Dkedpfsy Igu Dsx Am Sel

Stav: nový, pohotovostná hmotnosť: 3 600 kg, maximálna hmotnosť nákladu: 8 300 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 200 mm, šírka ložného priestoru: 2 480 mm, zavesenie: iný, veľkosť pneumatiky: 205/65 R 17,5, rázvor náprav: 990 mm, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 205/65 R 17,5, veľkosť zadnej pneumatiky: 205/65 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Ťažné oj vyťahovateľné približne do 3 850 mm, aretácia pri približne 1 000 mm, 2 000 mm, 3 000 mm alebo 3 850 mm, výška nakladania zaťaženého cca 830 mm, vnútorná šírka vozidla cca 2 530 mm, v strede 4 rázové kapsy pre zasúvateľné stĺpiky 100 x 50, 8 kapsí na stĺpiky vo vonkajšom ráme, 4 kotviace oká po 5,3 t, vonkajší rám s upevňovacími okami, 4 výstražné tabuľky s osvetlením, zadné výstražné majáky, zasúvateľné, obrysové označenie a bočná nárazová ochrana, zadné blatníky a potlačenie striekajúcej vody, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac údajov na: !, More Details: ! Dodpfxsy H A S Ne Am Sjkl

Stav: nový, pohotovostná hmotnosť: 3 600 kg, maximálna hmotnosť nákladu: 8 300 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 200 mm, šírka ložného priestoru: 2 480 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R 17,5, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 205/65 R 17,5, veľkosť zadnej pneumatiky: 205/65 R 17,5, kabína vodiča: iný, emisná trieda: žiadny, palivo: biodiesel, Výbava: ABS, pneumatická brzda, Ťažné oje výsuvné cca do 3.850 mm, zaistenie pri cca 1.000 mm, 2.000 mm, 3.000 mm alebo 3.850 mm, nakladacia výška cca 800 mm, vnútorná šírka vozidla cca 2.530 mm, uprostred 4x vrecká na zasúvacie stĺpiky 100 x 50, 8x vrecká na stĺpiky v vonkajšom ráme, 4x kotevné oká po 5,3 t, vonkajší rám s upevňovacími okami, 4x varovná tabuľa s osvetlením, zadné majákové svetlo, zasúvacie, obrysové označenie a bočná ochrana proti nárazu, blatníky a potlačenie rozstreku vzadu, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na: !, More Details: ! Dkodpfx Ameyxwuis Sel

Stav: použitý, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 02/2018, dĺžka ložného priestoru: 5 060 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 500 mm, Rok výroby: 2018, MUELLER MITTELTAL Dkjdjy E Ecnopfx Am Sol Príves (SKLÁPAČ) 5,06 m Dovezené / BEZ HAVÁRIE VO VEĽMI DOBROM STAVE! ? ROK VÝROBY: 2018 VZDUCHOVÝ PODVOZOK ROZMER PNEUMATÍK: 385/55R19,5 ROZVOR KOLIES: 115 PLOŠINA: 506 x 242 x 50 m CELKOVÁ HMOTNOSŤ: 13 500 kg NOSNOSŤ: 6 350 kg TEL: KUBA – POĽSKY, ANGLICKY, NEMECKY, TALIANSKY SEBASTIAN – POĽSKY, NEMECKY, TALIANSKY, ????? LASZLO – MAĎARSKY COSTEL – RUMUNSKY? (Vybavíme všetky formality na export vrátane čísla) RADEK – ?????