Faymonville Multimax Plus (Neugerät) kúpiť použité (5 890)

Stav: nový, pohotovostná hmotnosť: 17 250 kg, maximálna hmotnosť nákladu: 48 700 kg, celková hmotnosť: 66 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 550 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 17 250 kg, Výbava: ABS, Labutia tyč (Schwanenhals): - Labutia tyč v SNT dizajne na optimalizáciu dĺžky ložnej plochy, dĺžka cca 3 750 mm - Hydraulicky zdvíhateľná/spúšťateľná a zjazdná labutia tyč - Pre ťahače: 6 x 4 a 8 x 4 (alebo 6 x 4 s voliteľným jednoosovým dolly) Nízka ložná plocha (Tiefbett): - Nízka ložná plocha s vonkajšími nosníkmi, vyhotovená ako teleskopický most na kotly v nízkom prevedení s výsuvom vpredu - Rozmery: dĺžka x šírka cca 7 550 mm x 2 740 mm - Mechanické uzamykanie výsuvu Podvozok: - Zadný podvozok s uzavretým vonkajším rámom - Rebrovaný plechový povrch a priebežná prizmatická výrezová „baggermulda“ cca 1 450/900 x 505 mm, vzadu otvorená Nápravy, pruženie a pneumatiky: - „PENDEL-AXLE“ – všetky nápravy sú hydromechanicky riadené - Ventil proti prasknutiu hadíc na vyrovnávacích valcoch náprav s automatickou funkciou RESET - Hydraulické valce s uzatváracími kohútikmi a predpínačmi na zaistenie vo zdvihnutej polohe - Záverečný lak náprav: 2 vrstvy dvojzložkového laku v jednotnej farbe „FAY-Grau-34-0260“ - Technická nosnosť nápravy: 12 000 kg - Hydraulické vyrovnávanie záťaže na nápravy - Pneumatiky: 245/70 R 17.5 Príslušenstvo: - Predná stena z ocele, zasúvateľná, výška cca 400 mm - 4 ks kliny pod kolesá - Zadná horná časť labutej tyče zakrytá odnímateľným krytom - 1 pár oceľových nájazdových rámp so slikrami a upevňovacími kolíkmi pre mostíky na uchytenie do nízkej ložnej plochy - Rampy je možné položiť nad alebo medzi háky - Možnosti upevnenia oceľových nájazdových rámp vzadu medzi vonkajšími nosníkmi labutej tyče - Zaisťovacie miesta každých cca 1 000 mm na výsuve Lasdpfx Aceh Hm Tzs Dec - 1 upevňovací krúžok vľavo a vpravo na prednom priečniku - Pripojovací panel pre napájacie vedenia k ťahaču, umiestnený na úrovni vonkajšieho rámového profilu - 6 párov závitových blokov na vonkajšej strane vnútorných nosníkov ložnej plochy pre montáž skrutkovacích krúžkov M24 - 6 párov zapustených upevňovacích krúžkov na vonkajšej strane vonkajších nosníkov ložnej plochy, sklopné dovnútra aj von - 1 pár závitových blokov vpredu a vzadu na vonkajších nosníkoch ložnej plochy pre montáž skrutkovacích krúžkov M24 - Závesná lišta pre voľné hliníkové nájazdové rampy na zadnom priečniku vozidla - Centrálne mazanie s dvoma čerpadlami značky BEKAMAX - Riadenie zadnej nápravy vpredu aj vzadu, ovládateľné káblovým diaľkovým ovládaním s kontrolou zarovnania náprav - 3 kW elektrohydraulická jednotka na ovládanie hydrauliky (okrem hydraulických navijakov) - Vyberateľná ložná podlaha (pozinkovaná), 3 diely medzi vonkajšími nosníkmi, s tvrdým drevom - Výklopné rozširovacie dosky cca 230 mm na každú stranu - Voľne položené rozširovacie dosky, s oceľovým rámom - 4 výstražné tabule cca 423 x 423 mm - Rádiové diaľkové ovládanie pre riadenie zadnej nápravy - 3,5'' kráľovský čap (königszapfen) - Protišmykový povrch na ľavom zrážaní labutej tyče - Hydraulické prípojky medzi labuťou tyčou a nízkou ložnou plochou s multispájacou namiesto skrutkových spojov - Vodiaca platňa labutej tyče pre sedlový čap, cca 800 mm široká - 1 rezervné koleso s držadlom - Parkovacie miesto na labutej tyči pre výstražné tabule pri nevyužití - 2 páry vreciek na kolíky zapustené v vonkajšom ráme podvozku pre zasúvacie kolíky cca 100 x 50 mm - Výrez lyžicovej tyče zadného podvozka vzadu uzatvorený zasúvateľnou doskou - Farba návesu: MB 7350 Novagrau

Stav: nový, maximálna hmotnosť nákladu: 49 000 kg, celková hmotnosť: 60 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 r 17.5, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Area: - Extendable loading area with rear chamfer of approx. 1,000 mm x 8° Lsdsh Etf Rspfx Ac Deac - 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the external frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, with chequered plate covering over the axles Detachable Two-Part Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood overlay - Ramps with hydraulically folding ramp sections, hydraulic lift and hydraulically adjustable side shift - Max. load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two rigid axles, two self-steering axles, air-suspended, with drum brakes, lifting/lowering function - The self-steering axles can be locked via electromagnetic reverse lock through reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made from high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer - High-quality 2-component (2K) topcoat in single-tone Novagrey Electrical System: - Electrical system according to EU regulations, ASPÖCK-NORDIK (ASS3) 24 Volt lighting - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Included Accessories: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the front wall - Yellow and red air couplings on galvanized front terminal strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfered loading area - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading area - White reflective tape according to EU regulations on the sides, red at the rear and on the extension - Electro-hydraulic power unit - At the gooseneck and on the ramps, left and right, each with mounting for warning panels including socket - Control valves for the ramps mounted on the right side of the semi-trailer - Mudflap at the rear of the trailer - User manual and description on USB stick - Removable ALU side boards and rear panel on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized stanchions removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading area for a 20 ft, 2x 20 ft or a 40 ft container - 7 pairs of stake pockets for 100 x 50 mm stakes in the external frame of the loading area - Extensions, galvanized, retractable by approx. 230 mm per side - Lift axle on the front axle with control - 20 x 20 mm square climbing strips - BEKAMAX central lubrication system - Four warning panels extendable by approx. 400 mm (approx. 423 x 423 mm)

Stav: nový, pohotovostná hmotnosť: 12 900 kg, maximálna hmotnosť nákladu: 34 100 kg, celková hmotnosť: 47 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 245/70 R 17,5, farba: sivý, prevádzková hmotnosť: 12 900 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and removable - Technical fifth wheel load: 23,000 kg - Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm long - Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings foldable outwards - 1 pair of lashing rings mounted flat in the trough - 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum Axle and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Burst protection valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-inserts for securing in raised position - Axles finished with two layers of single-colour 2K paint in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: - Prepared for mounting bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanised steel front wall, approx. 400 mm high - One spare wheel - At the galvanised connection rail front, yellow-red air couplings - 4 wheel chocks - Forced steering from front and rear controlled via cable remote control with push buttons, includes single-track monitoring of axles - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - White reflective tape on the sides, the extension, and the rear in accordance with EU regulations - European reflective panels (red-yellow) at the rear of the trailer - Brackets at the gooseneck and rear panel left/right for warning signs, including socket - 6 pairs of threaded blocks between lashing rings under the top flange on the outer beam for mounting bolt-on RUD VLBG-4 rings Laedpfohlz R Sox Ac Dec - Plug-in ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear galvanised plug-in stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area closed with removable cover - 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform - Folding widening pieces, approx. 230 mm per side - 2 pairs of bolt-on RUD VLBG-4 M24 rings (LC 8,000 daN) - 1 pair of steel ramps for bridging the low bed towing hook - On the loading platform, a coated sand layer as anti-slip protection - 80 km/h speed stickers at the rear and both sides - Rear part of the driving gear’s dipper stick trough covered by a plug-in plate - Four retractable warning boards approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for forced steering, in addition to cable control, with indicator lights on the receiver for axle single-track monitoring - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load gauge for determining axle loads - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished

Stav: nový, maximálna hmotnosť nákladu: 38 100 kg, celková hmotnosť: 50 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 100 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of folding lashing rings on the outside 3 pairs of folding lashing rings on the outside 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the loading platform for attaching tie-down straps Approx. 48 mm thick hardwood flooring, over the axles with checker plate covering Landing gear: JOST landing legs with 2-speed gearbox for 24 t lifting capacity Axles and tyres: BPW axles, two fixed and two self-steering axles, air suspension, drum brakes, with raise/lower function The self-steering axles can be locked for reversing via electromagnet, activated through reverse gear or manually Ledpfx Acetphtms Dsac Axle tools Tyres 205/65 R17.5 3PMSF Braking system: WABCO braking system according to EU regulations with EBS-E Steel construction: High-strength fine grain steel frame Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO Paintwork: Premium, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer High-quality 2-component top coat, single color in MB 7350 Novagrau Metallic paint not available Rear section metallized and painted in RAL 9010 Standard equipment included: 1 spare wheel 205/65 R 17.5 TPMS tire pressure monitoring system in accordance with ECE R 141 At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets on the front wall Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports underneath the sloped section of the loading area One bracket for a rotating beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tensioning mechanism for the sliding curtains Adjustable height approx. 400 mm "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls 3 pairs of sliding stanchions on the loading area The superstructure can be hydraulically extended at the rear left and right by approx. 750 mm Sliding roof with lift-up portal beam Sliding curtain with 700 mm extra length, with tensioning straps approx. every 600 mm Height to top edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will cause damage to the curtain Hanger bar for ALU loading ramps at the rear of the vehicle On the gooseneck and on the left and right of the rear panel, each with a bracket for warning signs including socket Mudflap at the rear of the trailer European reflective plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading platform Lifting axle on the front axle controlled by TEBS E depending on current axle load and loading condition Superstructure at the rear with closed ALU swing doors On the checker plate on the gooseneck and loading area, an integrated sand coating to prevent slipping Central lubrication system BEKAMAX with standard grease NLGI-2 and removable pump guard 80 km/h speed stickers at the rear and on both sides Load gauge for axle load determination including load diagram

Stav: nový, pohotovostná hmotnosť: 15 450 kg, maximálna hmotnosť nákladu: 65 550 kg, celková hmotnosť: 80 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 21 900 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 925 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17.5, farba: sivý, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, rear with a bevel of approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Suitable for tractor units: 4x2, 6x2, and 6x4. Loading area: Loading area in double-extendable design, approx. 8,800 mm long with a rear bevel of approx. 500 mm x 10°. The central beam features a support table approx. 300 mm wide with long holes at the front and rear for the attachment and repositioning of optional bridging elements, welded in place. Pneumatic locking mechanism with conical locking bolts and reinforced locking positions, the supply lines are safely routed within the extendable beams and automatically adjust to the respective platform length. Axles and tyres: BPW axles and suspension, first axle steered ahead, all other axles hydro-mechanically forced-steered. First axle with electromagnetically actuated reverse lock via reverse gear and manual activation. Technical axle load: 12,000 kg. Air suspension with raise and lower valve. Manufacturer at our discretion. Lsdpfx Acerigw Rj Djac Sockets and lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Complete steel construction shot-blasted, then finished with ZINACOR 850 hot-dip coating. Painting: 6-stage final treatment: Entire steel structure shot-blasted post-welding. One coat zinc-based primer, one coat adhesion primer. Final coating with two coats of 2-component paint, single-tone in DB 7350 Novagrau, followed by sealing of cavities with special wax. Accessories: Detachable steel front wall, approx. 400 mm high. Supply line connection rail to tractor unit mounted at height of outer frame profile. ASPÖCK-UNIBOX at front connection rail with 24N, 24S & 15-pin sockets. Should your pin assignment differ from ISO connector standard, please inform us. 3 kW electric-hydraulic unit to operate hydraulic functions (excluding hydraulic winches). On the gooseneck: one pair of detachable ALU side walls, approx. 400 mm high, anodised finish. 3.5" king pin. Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide. 2 wheel chocks with holders in front of the front wall. Mechanical landing gear with 2-speed gearbox and hand crank. Control valves for hydraulic ramps on the right side of the vehicle. One pair of mechanical rear supports. Central lubrication system with 1 pump, BEKAMAX brand, standard grease per NLGI-2. Removable protector for the central lubrication pump(s). Remote axle steering from front and rear via cable remote control with push buttons, featuring axle alignment monitoring, without installation in tractor unit. Below gooseneck and at the end cross member, one 7-pin socket with warning sign holder each on left and right. One 7-pin socket at the end cross member. User manual and documentation included. Single-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight design. Please note: Special equipment and accessories may increase curb weight and thus reduce payload accordingly. Warning package: 4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.

Stav: nový, pohotovostná hmotnosť: 34 500 kg, maximálna hmotnosť nákladu: 106 700 kg, celková hmotnosť: 141 200 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 7 150 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 580 mm, veľkosť pneumatiky: 285/70 R19.5, farba: sivý, prevádzková hmotnosť: 34 500 kg, Výbava: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Undercarriage: - Hook mountings at front and rear - Undercarriage length x width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and pin-lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x width approx. 430 mm x 1,350 mm - Loading height 580 mm with ground clearance of 150 mm - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of M30 threaded blocks on the inner beam for mounting screwable rings 5-Axle Rear Undercarriage: - Mechanical pin-lug coupling at the front for low bed attachment; end cross-member at the rear - Undercarriage length x width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear undercarriage): - "PENDULUM AXLE", all axles hydro-mechanically forced steered - Hose rupture valve on axle balancing cylinders with automatic RESET function - Hydraulic cylinders fitted with shut-off taps and locking plugs for securing in raised position - Final coating of axles with two layers of 2K paint, single color MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres: 285/70 R19.5 Remote Steering (Follow-up Steering): - Remote steering from front and rear operable via cable remote control with push buttons, with axle tracking monitoring - Socket for remote steering operation at the gooseneck - Cable remote control with push buttons including axle tracking monitoring Accessories included: - Yellow-red air couplings on galvanized front connection rail - Steel front wall approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" king pin - Boom with winch for spare wheel at gooseneck front - Truck hydraulic connection with flow regulator (40 l/min), including boom for suspending service lines; tractor unit tank must have at least 80 liters capacity with connectors - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Plug-in ALU side boards and tailgate on the gooseneck, approx. 400 mm high, anodized - Control levers on the gooseneck protected by a foldable cover - Separate air connection with air gun at the gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle undercarriage, 1x at the 5-axle undercarriage - Variomax tool kit - Multi-coupling hydraulic connections at low bed hook area - Front undercarriage with separate air connection for pneumatic tools - Threaded insert option (ø 40 mm) every approx. 500 mm on the outer web of the excavator deck for screw rings - Foldable width extensions with steel inlays, adjustable from approx. 2,850 mm to 3,250 mm Ledpjwhywfsfx Ac Dsac - Steel inlays with approx. 12 mm thick rubber covering - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering in addition to cable remote control - Sand layer coating as anti-slip protection - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 39 400 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 760 mm, zavesenie: vzduch, veľkosť pneumatiky: 205/65 R17.5, farba: sivý, prevádzková hmotnosť: 10 600 kg, Výbava: ABS, Gooseneck: - Gooseneck with 30 mm hardwood floor - Gooseneck in straight design at the rear - 3 pairs of lashing rings (LC 5,000 daN) Extendable loading area: - Loading area in extendable version Laedpfot Ag Uwjx Ac Djc - 5 pairs of lashing rings foldable outwards - 3 pairs of lashing rings foldable outwards - 1 pair of lashing rings laid flat at the front of the loading area - Cut-outs in the outer frame of the loading area for attaching tension belts - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid, two trailing steering axles - Air suspension, with drum brakes, with lifting/lowering function - The trailing steering axles with electro-magnetic reversing lock, can be activated either via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Novagrau - Rear section metalized and painted in RAL 9010 (pure white) Included accessories: - One spare wheel with holder in front of the front wall - 2" kingpin - Galvanized steel front wall approximately 400 mm high - Yellow-red air couplings on the galvanized connection bar at the front - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the sloped loading area - Bracket for a revolving beacon at the rear of the trailer - Galvanized, extendable width approx. 230 mm per side - White reflective tape to EU regulations on the side, at the extension, and red at the rear - At the gooseneck and on the rear plate, left and right, one bracket for warning signs each, including socket - European reflective warning plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in aluminium side and rear panels approx. 2,440 x 400 mm - The rear, galvanized plug-in stakes are removable, length of the structure approx. 2,560 mm - 7 pairs of WADER container locks - 1x 20ft container on the loading area; 1x 40ft container on the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle at the front axle controlled by TEBS E, depending on current axle load and load condition - Movable hanging bar for aluminium approach ramps at the rear of the vehicle - On checker plates on the gooseneck and loading area, a painted-in sand layer as anti-slip protection - Four warning signs each extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - On warning signs, bracket for rotating beacon - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle l

Stav: nový, pohotovostná hmotnosť: 14 350 kg, maximálna hmotnosť nákladu: 53 450 kg, celková hmotnosť: 67 800 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 800 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Swan neck: - Swan neck in SNT design to optimize the loading platform length, approx. 3,700 mm long - Swan neck at the rear with a taper, approx. 1,000 mm x 10° Lajdpfx Acjya E A Ne Dsc - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading platform: - Extendable loading platform, approx. 8,800 mm long, with a rear taper of approx. 500 mm x 10° - Recess in the loading platform, including into the taper, to accommodate the excavator stick, approx. 3,850 x 750 x 210/290 mm Two-piece steel ramps: - One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber lining - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and metal flooring approx. 5 mm as additional reinforcement on the platform’s taper - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm along the external ramp frame Axles, suspension, and tyres: - BPW axles and suspension, first axle steering ahead, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - First axle with electromagnetic reverse lock, activated by reverse gear and manually selectable - Air suspension with lift and lower valve - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R141 - TPMS sensors mounted in all wheels including spare wheels Surface treatment: - Complete steel construction shot-blasted after welding using a shot blasting plant - Second round of blasting with corundum for optimum coating adhesion - HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 coats of 2K top coat in single colour MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, excluding hydraulic winches - 1 spare wheel - External member on the swan neck with mounting holes for boltable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the swan neck - On the swan neck: 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised - On the swan neck: one plug-in ALU rear wall, approx. 400 mm high, anodised - Over the swan neck approx. 40 mm thick hardwood flooring, over the king pin area treadplate covering - 2" king pin - Round NATO socket on the front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in the outer frame of the platform, foldable to the outside - Extendable (galvanised) widenings by approx. 230 mm each side - Wheel recesses with square climbing strips, 15 x 15 mm before the axles, open all the way to the swan neck cross member, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as widening planks - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle on the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm

Stav: nový, pohotovostná hmotnosť: 9 300 kg, maximálna hmotnosť nákladu: 38 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 200 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22,5, farba: sivo-čierny, Výbava: ABS, Ložná plocha: • Výsuvná ložná plocha s pneumaticky ovládaným uzávěrem • Ložná plocha s cca 30 mm silnou podlahou z dřevěného masivu • 7 párů vyklápěcích vázacích ok směrem ven (LC 5 000 daN) • 3 páry vyklápěcích vázacích ok směrem ven (LC 10 000 daN) • Výřezy ve vnějším rámu ložné plochy pro zavěšení upínacích pásů (LC 2 000 daN) Lsdpfxsiu Etrs Ac Djac Nápravy a pneumatika: • Nápravy BPW a odpružení, všechny nápravy hydro-mechanicky nuceně řízené • Se kotoučovými brzdami • Technické zatížení nápravy: 10 000 kg • Vzduchové odpružení s ventilem pro zvedání a spouštění • Nářadí pro nápravy • Pneumatiky: 385/65 R 22,5 • Systém kontroly tlaku v pneumatikách TPMS dle ECE R 141 Brzdový systém: • Brzdový systém WABCO dle předpisů EU s EBS-E (2S2M) Elektrické zařízení: • Elektrická instalace dle předpisů EU, osvětlení 24 V ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX na připojovací liště vpředu se zásuvkami 24N, 24S & 15-pin • Připojení dle ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Příslušenství v ceně: • Řízení zadní nápravy zepředu a zezadu pomocí kabelového dálkového ovládání s tlačítky, s kontrolou jedné stopy náprav • 4x zajišťovací klíny s držákem na čelní stěně • 2" královský čep • 1x pozinkovaná čelní stěna z oceli, cca 1 600 mm vysoká • Na pozinkované připojovací liště vpředu žluto-červené vzduchové spojky • Bílé reflektorové pásky dle EU na bocích, výsuvu a vzadu na návěsu v červené barvě • Evropské reflektorové štítky (červeno-žluté) vzadu na návěsu • 1x zástěrka vzadu na návěsu • Návod k obsluze a popis • Držák pro výstražné světlo vzadu na návěsu • Ložná plocha s cca 30 mm silnou dřevěnou podlahou zakrytá Omega-profily • 10 párů kapes na sloupky pro zasouvací sloupky 100 x 50 mm ve vnějším rámu ložné plochy • 1x držák rezervního kola pod ložnou plochou vpravo ve směru jízdy • Elektrohydraulická jednotka • Na labutím krku a zadní části vlevo i vpravo držák výstražných štítů včetně zásuvky • Na centrálním nosníku lakovaná vrstva písku jako ochrana proti smyku • 6 párů kontejnerových kapes WADER v ložné ploše, pro 1x 20ft, 2x 20ft nebo 1x 40ft kontejner, u výsuvu další uzamykací bod pro 45ft kontejner • 4 páry příčných kapes pro sloupky 100 x 50 mm v ložné ploše • Montovaná nástupní žebřík vpravo ve směru jízdy • 1x box na nářadí z HDPE cca 1 200 x 500 x 480 mm vpředu pod ložnou plochou vlevo ve směru jízdy • Centrální mazací zařízení BEKAMAX (Pico) s odnímatelným krytem čerpadla • Zvedací náprava na přední nápravě s ovládáním přes TEBS E v závislosti na aktuálním zatížení nápravy a stavu naložení • Bezdrátové dálkové ovládání pro řízení náprav navíc ke kabelovému ovládání, s kontrolkami na přijímači pro kontrolu jedné stopy • Čtyři výsuvné výstražné tabule cca 400 mm, cca 423 x 423 mm s pozičním světlometem • Na výstražných tabulích držák pro výstražné světlo • Nálepky s omezením rychlosti 80 km/h vzadu a na obou stranách • Manometr pro měření zatížení náprav včetně zatěžovacího diagramu • Metalizace HRM (High Resistance Metallisation) vnějšího rámu • Celá ocelová konstrukce tryskána, poté definované viditelné plochy metalizované a žárově upraveny ZINACOR 850 (zinek 85 % - hliník 15 %)

Stav: nový, pohotovostná hmotnosť: 22 700 kg, maximálna hmotnosť nákladu: 79 300 kg, celková hmotnosť: 102 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 11 000 mm, šírka ložného priestoru: 2 850 mm, výška ložného priestoru: 920 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 22 700 kg, Výbava: ABS, Swan neck: - Swan neck in SNT design for optimizing the loading platform length, approx. 3,750 mm long, with rear chamfer approx. 850 mm x 10° - Hydraulically raisable and lowerable, lifting stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open at the rear third - Suitable for tractor units: 6 x 4 and 8 x 4 Lodpfx Acsk Af Svs Dsac Loading platform: - Extendable loading platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10°. - Recess in the loading platform including in the bevel for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length Ramps: - Pair of two-part steel ramps, approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps hydraulically adjustable sideways approx. 235 mm outward and approx. 215 mm inward, individually - "Super Grip" rubber surface 25 mm and steel plate approx. 5 mm as additional reinforcement on the loading platform bevel - Rectangular climbing strips 20x30 mm, approx. every 200 mm on the outer ramp frame Axles, suspension and tyres: - PA-X axle system, all axles force-steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the loading platform length, both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the swan neck with mounting holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - Tread plate covering over the swan neck - On the swan neck, 1 pair of removable ALU side walls, approx. 400 mm high, anodized - Removable ALU rear wall on the swan neck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin mounted - Guide plate on the swan neck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical drop supports at the front - 1-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop supports at the front - Continuous steel plate covering on the loading platform with painted-on sand layer as slip protection - 1 intermediate table, approx. 500 mm wide, for extension, with elongated holes for insertable and repositionable bridging elements - Painted-on sand coating on the support surfaces of the intermediate table - Mechanical lock for locking the intermediate table when extended - 8 pairs of stake pockets in the outer frame - Extendable galvanized widening sections, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on the left and right at the rear of the vehicle - 3 kW electric-hydraulic power unit - Loose widening planks in reinforced steel U-profile frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stav: nový, maximálna hmotnosť nákladu: 38 800 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with anti-slip chequer plate Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - 235/75 R 17.5 3PMSF Brake system: - WABCO brake system according to EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Included accessories: - One spare wheel with holder in front of the bulkhead - 2-inch king pin - Galvanized steel bulkhead, approx. 400 mm high - Yellow and red air couplings on the galvanized front connector strip - 4 wheel chocks with holders at the bulkhead - Mount for rotating beacon at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU approach ramps - Galvanized folding supports under the chamfer of the loading platform - Cover plates for bridging the gap between ramps and platform - White reflective tape according to EU regulations on sides, extension, and red at the rear - Electro-hydraulic unit positioned at the rear, under the platform - On the gooseneck and ramps, left and right, mounts for warning signs including power socket - Control valves for the ramps installed on the right side of the trailer - One mud flap at the rear of the trailer - User manual and documentation on USB stick - ALU side walls and rear wall approx. 2,440 x 400 mm on the gooseneck - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - 3 pairs of WADER container pockets in the platform suitable for a 20ft, 30ft, or 40ft container - 6 pairs of 100x50 mm stanchion pockets in the external frame of the loading platform - Galvanized side extensions, extendable by approx. 230 mm per side - 20 x 20 mm square lashing rails every 200 mm on the external frame of the platform's chamfer - Anti-slip sand coating, painted on chequer plates above the king pin and on the loading platform - Mount for rotating beacon on warning signs - European reflective boards (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and both sides Ledpfjuqlmnjx Ac Dsac - Load manometer for axle load measurement including load diagram - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-metal sprayed with ZINACOR 850 (zinc 85% - aluminum 15%)

Stav: nový, pohotovostná hmotnosť: 7 900 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, prevádzková hmotnosť: 7 900 kg, Výbava: ABS, Gooseneck: - Gooseneck with rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading Platform: - Loading platform with rear taper approx. 1,000 mm x 8° - Recess in the sloped section and extending into the loading platform for the excavator bucket stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading platform for attaching tensioning straps - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Lasdpfx Aceunrapj Dec Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 trailing-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure automatically shot-blasted after welding with turbine blasting unit - Second blast treatment with corundum for optimal adhesion of the coating system - Final coating with 2 coats of 2K topcoat, single colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted in RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with sockets: 2x 7-pin & 1x 15-pin Included Accessories: - Extensive lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the front wall - Mounting at the rear of the gooseneck for ALU loading ramps - Galvanised folding supports under the sloped rear section of the loading platform - A holder for a beacon at the rear of the trailer - Galvanised, extendable side extensions approx. 230 mm each side - White reflective tape on the sides and red on the rear in accordance with EU regulations - At the gooseneck and rear plate, left and right, each with a holder for warning plates including socket - On the gooseneck, plug-in ALU side and rear boards approx. 2,440 x 400 mm - The rear, galvanised stakes are removable - 2 pairs of WADER container locks in the loading platform for a 20 ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading platform - Sliding mounting rail for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the sloped section of the loading platform - Painted-on sand coating as anti-slip protection on the checker plates of the gooseneck and the loading platform - Four warning plates extendable by approx. 400 mm, approx. 423 x 423 mm each, with position light - Holder for beacon on the warning plates - 80 km/h speed stickers on the rear and on both sides - European reflective panels (red-yellow) at the rear of the trailer - Manual and documentation on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas are hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminium 15%)

Stav: nový, pohotovostná hmotnosť: 12 800 kg, maximálna hmotnosť nákladu: 36 200 kg, celková hmotnosť: 49 000 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 850 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 375 mm, veľkosť pneumatiky: 245/70 R 17.5, farba: sivý, prevádzková hmotnosť: 12 800 kg, Výbava: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, length approx. 3,750 mm - Gooseneck hydraulically raisable/lowerable and detachable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading Platform: - Low bed with external beams, designed as a telescopic vessel bridge in low-profile construction with front extension - Length 6,850 mm x width 2,540 mm - One locking position approx. every 1,000 mm on the extension Rear Chassis: - Rear chassis with closed outer frame, checker plate cover, and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles, Suspension, and Tyres: - "PENDLE-AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position - Axles finished with 2 coats of 2K acrylic paint, single color in "FAY-Grey-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tire pressure monitoring system according to ECE R 14 - TPMS tire pressure sensors mounted in all wheels including spare wheels Accessories included: - Plug-in front wall made of steel, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches - One spare wheel with mounting adapter - Outer beams on gooseneck with mounting holes for bolted lashing rings - Detachable ALU side walls on gooseneck, approx. 400 mm high, anodized - Detachable ALU rear wall on gooseneck, approx. 400 mm high, anodized Laodpfxsvy Edco Ac Doc - Checker plate cover above the gooseneck - Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide - Operating area on gooseneck illuminated with on/off switch - Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly - 2" king pin - Anti-slip stickers on the left chamfer of the gooseneck - Rear upper part of the gooseneck closed with a removable cover - 4 wheel chocks with holders - Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings - 1 pair of steel ramps with climbing strips and mounting bolts for bridging the mounting hooks of the low bed - Ramps can be placed over or between the hooks - Mounting provision for steel ramps at the rear between the outer beams of the gooseneck - Prepared to accommodate bolt-on container mounts for 1x20ft on the outer beams - Mechanical pin-lug coupling from low bed to chassis for exchange of loading platform or installation of extension beams - With electro-pneumatic-hydraulic couplings - Outer beams of the low bed with integrally painted anti-slip sand layer - Removable (galvanized) loading floor in 3 sections insertable between outer beams with hardwood covering - Folding wideners, approx. 230 mm per side - Hanging bar at the front of the rear chassis for loose drive-on ramps for the low bed - 2 pairs of stake pockets recessed in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm - Hanging bar for loose ALU ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps - Radio and cable remote control - 4 warning signs, approx. 423 mm x 423 mm, extendable - Extensive lashing positions

Stav: nový, pohotovostná hmotnosť: 15 900 kg, maximálna hmotnosť nákladu: 63 500 kg, celková hmotnosť: 68 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 12 700 mm, šírka ložného priestoru: 2 740 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75/r17,5, farba: sivý, prevádzková hmotnosť: 52 100 kg, Výbava: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, approx. 3,300 mm long, rear with chamfer approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Loading Area: Extendable loading area, approx. 9,400 mm long with rear chamfer approx. 500 mm x 10° A recess in the loading area and chamfer for the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tools 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-piece Steel Ramps: One pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips; each ramp can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward Braking System: WABCO EBS-E brake system in accordance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for maximum corrosion protection Surface Treatment: Entire steel structure automatically blast-cleaned with shot wheels after welding Second blast cleaning with corundum for optimum coating adhesion Final painting in single-color Nova Gray with two coats of 2K paint; cavities then sealed with special wax Rims in silver gray Steel Structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Detachable steel front wall, approx. 400 mm high Supply line connection rail for tractor unit Coiled cable to supply the electro-hydraulic power unit and/or electric winch between semi-trailer and tractor unit with plug; electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches Gooseneck side members with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, subsequently every approx. 400 mm A mounting hole in the upper rear area of the gooseneck side member for a bolted lashing ring Approx. 40 mm thick hardwood covering above the gooseneck, checker plate covering above the kingpin Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide Continuous 50 mm thick hardwood covering on the loading platform and interrupted hardwood between the axles Loading platform locking with conically welded locating profiles every 250 mm, including prestressing plate Slotted holes for insertable and adjustable bridging elements: on the fixed part behind the gooseneck at the front of the loading area Lasdpfjmfqi Iex Ac Doc 1 movable intermediate table for the extension tube with large cross-section Control valves for hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, with standard grease in accordance with NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control; receiver features two indicator lights for single-track monitoring

Stav: nový, pohotovostná hmotnosť: 10 600 kg, maximálna hmotnosť nákladu: 35 400 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 940 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Load platform: - Extendable load platform Lodel Ux Rwopfx Ac Djac - Load platform with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching lashing straps Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in single-color Nova Grey - Rear precisely metalized and painted in RAL 9010 (Pure White) - No metallic paint available Landing gear: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical installation according to EU regulations, 24V LED lighting - 2x 7-pin and 15-pin sockets Axles and tyres: - BPW axles, air suspension, with disc brakes (377 mm), with raise/lower function - Hydro-mechanical forced steering - Axle tools - Twin tyres 235/75 R 17.5 Standard accessories: - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall, approx. 1600 mm high - White reflective tape according to EU regulations on the sides, on the extension, and red at the rear - Load platform with heavy-duty hardwood floor - Steering from front and rear via cable - Remote operation via push-button control, with axle steering alignment indicator - Radio remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the load platform - Galvanized folding supports under the rear bevel of the platform - Movable hook-in rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the rear of the trailer - One mud flap at the rear of the trailer - Rear beacon bracket - Warning sign brackets including sockets on the gooseneck and rear plate left/right - INOX toolbox 1500x390x810 mm under platform, right side direction of travel - BEKAMAX (Pico) central lubrication system with NLHI-2 standard grease and removable pump guard - 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container, additional locking position provided in the extension for a 45ft container - 4 pairs of crosswise stake pocket rails in the loading platform for 100 x 50 mm plug-in stakes - Lifting axle on the front axle with TEBS control - depending on current axle load and load status - Speed stickers (80 km/h) on rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with LED position lights - Bracket for beacon on warning signs - Load pressure gauge for axle load determination incl. load diagram - HRM metalizing (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, metalized with ZINACOR 850 (zinc 85% - alu 15%) and hot-finished at the defined visible areas

Stav: nový, pohotovostná hmotnosť: 9 500 kg, maximálna hmotnosť nákladu: 35 500 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, prevádzková hmotnosť: 9 500 kg, Výbava: ABS, Nakladacia plocha v vysunuteľnom vyhotovení: Nakladacia plocha s tvrdými drevenými doskami so zadnou skosením cca 1.000 mm x 8° 1 pár pevne zabudovaných kolísk na kolesá, cca 1.610 x 970 x 400 mm 2 páry upevňovacích krúžkov (LC 5.000 daN) Laedpjk Eammefx Ac Doc 1 pár upevňovacích krúžkov (LC 10.000 daN) 6 párov smerom von sklopných upevňovacích krúžkov (LC 5.000 daN) 2 páry smerom von sklopných upevňovacích krúžkov (LC 10.000 daN) Výrezy v vonkajšom ráme nakladacej plochy na upevnenie napínacích pásov (LC 2.000 daN) Brzdový systém: Brzdový systém podľa noriem EÚ s EBS-E (2S2M) Lak: Prvotriedna a odolná ochrana proti korózii štandardne guľôčkovo tryskanej zváranej konštrukcie vďaka 2-komponentnej (2K) zinkovej základnej vrstve s práškovým zinkom Vysokokvalitný 2-komponentný (2K) vrchný náter v jednej farbe v odtieni Novagrau Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Metalický lak nie je možný Návesové podpery: JOST návesové podpery (mechanické) s 2-rýchlostnou prevodovkou, nosnosť 24 t (skúšobná záťaž 50 t) Oceľová konštrukcia: Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele Kvalita ocele: S355J2+N/S355MC (medza klzu 355 MPa) S690QL/S700MC (medza klzu 690 MPa) Elektrická inštalácia: Elektrická inštalácia podľa noriem EÚ, osvetlenie 24 voltov Zásuvky 24N, 24S & 15-kolíková Nápravy a pneumatiky: BPW nápravy, vzduchovo odpružené, s kotúčovými brzdami (377 mm), s funkciou zdvíhania/spúšťania Samosmerovacie nápravy s elektro-magnetickou spätnou blokáciou, aktivovanou spiatočkou alebo manuálne Nápravové náradie Pneumatiky 435/50 R 19.5 Zahrnuté príslušenstvo: Na pozinkovanej prednej prípojnici žlto-červené vzduchové spojky 4 kusy klinov s držiakom 2" kónusový čap Pozinkovaná čelná stena z ocele, výška cca 1600 mm. EN12642-XL Biela reflexná páska podľa predpisov EÚ po bokoch, na výsuvu a vzadu červená Nakladacia plocha so silnou podlahou z tvrdého dreva 9 párov zásuvných vreciek na stĺpiky 100 x 50 mm vo vonkajšom ráme nakladacej plochy 1 držiak na rezervné koleso pod nakladacou plochou v smere jazdy vpravo Pozinkované výklopné podpery pod skosením nakladacej plochy Posuvné zavesovacie lišty na ALU nájazdové rampy na zadnej časti vozidla Európske reflexné tabule (červeno-žlté) na zadnej časti návesu Odstredivý záchyt na zadnej časti návesu Držiak na výstražné svetlo na zadnej časti návesu Na labutom krku a na zadnom nosníku naľavo a napravo držiak na výstražné tabule vrátane zásuvky HDPE náradový box 620x360x610 pod nakladacou plochou v smere jazdy naľavo 4 páry WADER kontajnerových vreciek v nakladacej ploche pre 1x 20ft-kontajner alebo 1x 40ft-kontajner, vo výsuve je pripravené ďalšie uzamknutie pre 45ft-kontajner 3 páry priečnych zásuvných líšt na stĺpiky 100 x 50 mm Zdvihacia náprava na prednej náprave s riadením cez TEBS E v závislosti na aktuálnom zaťažení náprav a aktuálnom stave naloženia Rýchlostná nálepka 80 km/h vzadu a na oboch stranách Štyri približne o 400 mm vysúvateľné výstražné tabule cca 423 x 423 mm s LED pozičnou lampou. Na výstražných tabuliach držiak pre výstražné svetlo Manometer na meranie záťaže na nápravy vrátane diagramu zaťaženia HRM metalizácia (High Resistance Metallisation) vonkajšieho rámu Kompletná oceľová konštrukcia guľôčkovo tryskaná, následne definované viditeľné plochy metalizované

Stav: nový, pohotovostná hmotnosť: 11 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 250 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 r 22,5, farba: sivo-čierny, Výbava: ABS, Loading platform: Extendable loading platform with pneumatically operated locking mechanism A fixed intermediate table approx. 250 mm wide is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Cut-outs in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles hydro-mechanically forced-steered Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6-fold tyres, 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Lasdpfxehlz She Ac Dsc Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Steel structure: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system according to EU regulations, lighting 24V ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality 2-component (2K) single-colour top coat in novagrey Rear section metallised and painted in RAL 9010 (pure white) No metallic paint possible Accessories included: Mountings for warning plates on the gooseneck and on the rear plate, left and right, each with socket Remote steering operated from the front and rear via cable remote control with push buttons, with axle tracking control Electro-hydraulic unit 4 wheel chocks with holder on the front wall 2" king pin Galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised connection strip at the front White reflective tape according to EU regulations on the sides, on the extension and rear in red European reflector panels (red-yellow) at the rear of the semitrailer One mud flap at the rear of the trailer Manual and description Mounting for a rotating beacon at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles 10 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in direction of travel 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft container or 1x 40ft container; for 45ft container, an additional locking position is provided in the extension 5 pairs of stanchion rail cross-members mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm One galvanised holder transversely under the platform (2,390 x 720 x 400 mm) Access ladder mounted on the right-hand side in direction of travel One HDPE toolbox 1,200x500x480 at the front under the loading platform, left-hand side in direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and loading condition Central lubrication system with 2 BEKAMAX (Pico) pumps, with standard grease NLGI-2 and removable guard around the pump Red/white reflective tape in the extension of the loading platform Painted sand coating on the central beam as an anti-slip measure Radio remote control for the steering in additi

Stav: nový, pohotovostná hmotnosť: 6 350 kg, maximálna hmotnosť nákladu: 38 650 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R22,5, Výbava: ABS, Loading Area: - 2 pairs of folding lashing rings on the outside (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, air-suspended, with disc brakes (430 mm), equipped with lifting/lowering function - Tyres: 385/65 R 22.5 Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: - First-class and long-lasting corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) single-colour top coat in MB 7350 Nova Grey - Rear section metallised and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Steel Construction: - Steel construction made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (Yield strength 355MPa) - S690QL/S700MC (Yield strength 690MPa) Electrical System: - Electrical system according to EU regulations - 24 Volt lighting - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin - Connection in accordance with ISO. - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories Included: Ljdpfx Ajiu Etkjc Doac - Yellow-red air couplings mounted on the galvanised connection rail at the front - 4 wheel chocks with holders - 2" king pin - Galvanised steel front wall approx. 1,600 mm high, EN12642-XL - White reflective tape according to EU regulations on the sides and red on the rear of the semi-trailer - European reflective panels (red-yellow) on the rear of the trailer - Loading platform with approx. 30 mm thick hardwood floor set in omega profiles - 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area - 3 pairs of cross-rails for stake pockets for plug-in stanchions 100 x 50 mm, mounted transversely on the loading deck - Storage tray for 1,000 mm plug-in stanchions, at rear in the central beam - 1 spare wheel holder under the loading platform on the right-hand side (in direction of travel) - 1 mudflap at the rear of the trailer - Manual and documentation on USB stick - 1 bracket for a rotating beacon at the rear of the trailer - On the gooseneck and rear panel, left and right, a bracket for warning signs including socket - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and on both sides - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with an LED position light - Load pressure gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, followed by metallisation with ZINACOR 850 (Zinc 85% - Alu 15%) on the defined visible surfaces

Stav: nový, pohotovostná hmotnosť: 8 300 kg, maximálna hmotnosť nákladu: 36 700 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 1 080 mm, zavesenie: vzduch, veľkosť pneumatiky: 385/65 R 22.5, farba: sivý, Výbava: ABS, zdvíhacie čelo, Loading Platform: Extending loading platform design with pneumatically operated locking mechanism. Cut-outs in the outer frame of the loading platform for securing lashing straps. Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity. Axles and Tyres: BPW air suspension axles with disc brakes (430 mm), equipped with lift/lower function. Trailing steering axle with electromagnetically activated reverse lockout, switchable via reverse gear or manually. Axle toolbox. Tyre size 385/65 R 22.5. Brake System: WABCO braking system compliant with EU regulations, fitted with EBS-E. Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame by means of 2-component (2K) zinc dust primer. High-quality single-tone 2-component top coat in MB 7350 Novagrau. Laodpfx Acsikyh Ho Doc Rear section metallised and painted in RAL 9010. Metallic paint not possible. Steel Construction: Steel structure made from high-tensile fine-grain steels. Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical System: Electrical installation according to EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK. ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connections in accordance with ISO standards. Accessories Included: Galvanised air coupling connectors (yellow-red) on the front connection strip. Galvanised steel front wall, approx. 1,600 mm high, EN12642-XL. 4 wheel chocks with bracket. White reflective tape according to EU regulations at the sides, extension, and red at the rear. European reflective boards at the rear of the trailer. Loading platform with approx. 30 mm thick hardwood floor, enclosed in Omega profiles. 10 pairs of stake pockets for 100 x 50 mm square stakes in the outer frame. 1 spare wheel holder below the loading platform, right side when facing the direction of travel. Manual and documentation. Bracket for rotating beacon at the rear of the trailer. On the gooseneck and on the rear apron, left and right, each with bracket for warning signs including socket. Anti-slip sand coating painted onto the central beam. 6 pairs of WADER container pockets in the loading platform for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. For an extended 45ft container, an additional locking position is provided. 4 pairs of cross stake pocket rails, mounted transversely on the loading platform for 100 x 50 mm plug-in stakes. 1 galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm). Access ladder mounted on the right side in the direction of travel. Lift axle on the front axle, controlled by TEBS E, depending on current axle load and loading status. Load gauge for axle load assessment, including load diagram. HRM metallisation of the outer frame: complete steel structure shot-blasted, followed by hot-finish metallisation of the defined visible surfaces with ZINACOR 850.

Stav: nový, pohotovostná hmotnosť: 10 000 kg, maximálna hmotnosť nákladu: 41 600 kg, celková hmotnosť: 51 600 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5, farba: sivý, Výbava: ABS, Ložná plocha: - Labutí krk, délka cca 4 100 mm se středovým nosníkem - Ložná plocha ve výsuvném provedení, délka cca 9 500 mm se zkosením na zádi cca 350 mm x 10° a integrovanou závěsnou lištou pro nasazení volných ALU nájezdových ramp - Pneumatické zamykání s kuželovými uzamykacími čepy a zesílenými zajišťovacími pozicemi - Napájecí vedení je uloženo chráněně ve výsuvných nosnících a automaticky se přizpůsobuje aktuální délce ložné plochy Nápravy, odpružení a pneumatiky: - BPW nápravy a zavěšení, všechny nápravy hydromechanicky nuceně řízené - Montováno na otočné točně - Technické zatížení nápravy: 12 000 kg Lasdpfxjiuy Nlo Ac Dsc - Vzduchové odpružení se zdvihovým a spouštěcím ventilem - Pneumatiky 235/75 R17.5, dvoumontáž Lakování: - 6-ti komponentní povrchová úprava - Kompletní ocelová konstrukce po svařování otryskána - Jedna vrstva základního nátěru na bázi zinku, jedna vrstva adhezního primeru - Vrchní lakování dvěma vrstvami 2K akrylového laku v barvě MB 7350 Novagrau, poté utěsnění dutin speciálním voskem Ocelová konstrukce: - Ocelová konstrukce z vysoce pevných jemnozrnných ocelí - Kvalita oceli: - S355J2+N/S355MC (mez kluzu 355 MPa) - S690QL/S700MC (mez kluzu 690 MPa) - Svařeči certifikovaní dle DIN-EN 287-1 - Svařování metodou MAG dle EN ISO 4063, ochranný plyn M21 dle EN ISO 14175 Příslušenství: - Čelo z oceli, cca 1 600 mm vysoké - Kulatá NATO zásuvka na přední přípojnici - 3 kW elektrohydraulická jednotka pro ovládání hydraulických funkcí - 4 páry zapuštěných kotevních ok v vnějším rámu labutího krku - 4 páry kapes na sloupky v rámu labutího krku, pro sloupky cca 100x50 mm - 1 příčná lišta na kapsy na sloupky v ložné podlaze labutího krku, pro sloupky cca 100x50 mm (1x vzadu na labutím krku) - 2“ královský čep - Mechanické podpěry se dvourychlostní převodovkou a kličkou - JOST Modul B – statická zkušební zatížitelnost = 50 000 kg - Na labutím krku a ložné ploše cca 32 mm dřevěná podlaha, zapuštěná v ALU Omega profilech - Na výsuvu zajišťovací pozice cca každých 500 mm - 10 párů zapuštěných kotevních ok ležících ve vnějším rámu ložné plochy, vyklápěcí směrem ven - 6 párů kapes na sloupky ve vnějším rámu ložné plochy, pro sloupky cca 100x50 mm - 2 příčné lišty na kapsy na sloupky v ložné podlaze - Nerezový nářadlový box cca 1 250 x 500 x 550 mm - Zkosení na zadním příčníku vozidla cca 350 mm 10° - Integrovaná závěsná lišta pro volné alu nájezdové rampy na zadním příčníku - 1 pár opěrných trubek u zadního příčníku - Blatníky na všech nápravách - Centrální mazací zařízení s 1 čerpadlem - Dálkové řízení přední a zadní nápravy prostřednictvím kabelového dálkového ovladače pomocí tlačítka, s kontrolou sbíhavosti - Pod labutím krkem i vzadu na zadním příčníku vlevo a vpravo vždy jedna 7-pólová zásuvka na výstražné tabule - Jedna 7-pólová zásuvka na zadním příčníku - Příprava na přepravu kontejnerů „TWIST-LOCKS“ v ložné ploše pro přepravu 2x 20ft a 1x 40ft kontejnerů - Dálkové ovládání řízení navíc ke kabelovému dálkovému ovladači, se 2 kontrolkami na přijímači jako kontrola sbíhavosti - 2 manometry nápravové zátěže + diagram zátěže nápravy - 4 výstražné tabule cca 423 x 423 mm výsuvné o cca 400 mm - Standardní HRM metalizace (High Resistance Metallisation) vnějšího rámu - Kompletní ocelová konstrukce otryskána, poté definované viditelné plochy metalizovány žárově ZINACOR 850 (Zn 85% - Al 15%)

Stav: nový, maximálna hmotnosť nákladu: 36 020 kg, celková hmotnosť: 45 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 600 mm, šírka ložného priestoru: 2 540 mm, zavesenie: vzduch, veľkosť pneumatiky: 435/50 R 19.5, farba: sivý, Výbava: ABS, Loading Platform: - Loading platform with extendable design featuring pneumatically operated locking system - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tensioning straps Axles and Tyres: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually - Axle tools - Tyres 435/50 R 19.5 Brake System: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer Lsdpfxsi Dwlws Ac Doac - High-quality single-tone 2-component (2K) topcoat in Novagrau - Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint finish not possible Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel Construction: - Steel construction made from high-tensile fine-grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDICK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection as per ISO - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included Accessories: - Yellow-red air couplings on the galvanized front connection bar - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall, approx. 1,600 mm high - Yellow reflector tape in accordance with EU regulations on the sides, extension section, and rear of the trailer - European reflector plates (Red-Yellow) at the rear of the trailer - Loading platform with approx. 38 mm thick hardwood flooring - 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform - 1 spare wheel holder under the loading platform on the right-hand side in the direction of travel - Manual and description on USB stick - 1 mudflap at the rear of the trailer - 1 bracket for a beacon at the rear of the trailer - On the gooseneck and the rear plate, left and right, each with bracket for warning signs including socket - 1 INOX toolbox mounted crosswise under the platform (1,000 x 400 x 2,500mm) - 6 pairs of WADER container pockets in the platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension section for a 45ft container - 3 pairs of stake pocket strips, mounted transversely in the platform, for plug-in stakes 100 x 50 mm - 60 km/h speed sticker at the rear - 2 reversing spotlights mounted on the rear plate - Four warning signs extendable by approx. 400 mm (approx. 423 x 423 mm) each with a position lamp - Bracket for beacon on the warning signs - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-finished with ZINACOR 850 (85% zinc – 15% aluminium)

Stav: dobrý (použitý), konfigurácia náprav: 3 nápravy, povolené zaťaženie nápravy (náprava 1): 10 700 kg, dovolené zaťaženie nápravy (náprava 2): 10 700 kg, povolené zaťaženie nápravy (náprava 3): 10 700 kg, prvá registrácia: 03/2013, zavesenie: vzduch, veľkosť pneumatiky: 235/75R17.5, farba: červená, Rok výroby: 2013, = Further Options and Accessories = - Air suspension = Notes = Faymonville Euro low loader with detachable gooseneck for sale Specifications 4 wheel recesses, each 2 meters Width: 2.55 m Extendable width: 0.25 m Low bed: 8 meters Lajdjyw Sxtspfx Ac Djc Deck above axles: 4.30 m Gooseneck top: 3.10 m Loading height (driving position): 0.50 m German registration Tyres: 80 percent SAF axles 3 steered axles Robust and well-maintained low loader, immediately ready for heavy-duty transport. = Further Information = Axle configuration Tyre size: 235/75R17.5 Axle brand: SAF Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 2: Twin tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 3: Twin tyres; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Weights Unladen weight: 14,700 kg Payload: 17,400 kg Gross vehicle weight: 32,100 kg Condition Technical condition: good Visual condition: good Product safety Manufacturer: Faymonville BE Further Information Please contact Gerrit Haverhoek for more information.

Stav: veľmi dobrý (použitý), Rok výroby: 2025, prevádzkové hodiny: 2 h, zdvíhacia výška: 3 000 mm, typ paliva: nafta, výkon: 39 kW (53,03 k), Plus Power Diesel Forklift with Duplex mast, work lights, side shifter Forklift data: Manufacturer: Plus Power Year of manufacture: 5/2025 Operating hours (read): only 2 hours Load capacity: 2,500 kg Lifting height: 3,000 mm (Duplex mast) Dead weight: approx. 3,680 kg Overall height: 207 cm Overall width: 117 cm Engine: 39 kW Quanchai Diesel A new safety inspection (UVV) can be carried out on request. Other information: Affordable delivery possible throughout Europe. Viewings available by appointment only. We are happy to accept your equipment or construction machinery in trade-in. We are pleased to offer you a financing or leasing solution tailored to your needs. (for business customers only) If you have any questions, please contact us. All prices are ex-location 86684 Holzheim. Ljdpfx Asxkrv Noc Doac All information is subject to change. Errors in printing, transmission, and prior sale reserved. All information regarding color, equipment, condition, features, etc. of the vehicles offered is provided without guarantee. Subject to errors, mistakes, and prior sale. = Further Information = Unladen weight: 3,680 kg Lifting capacity: 2,500 kg Overall height: 207 cm CE marking: yes Technical condition: very good Visual condition: very good Please contact Tobias Mayr for further information.

Stav: nový, maximálna hmotnosť nákladu: 40 320 kg, celková hmotnosť: 50 960 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Celú našu ponuku vozidiel, vrátane okamžite a krátkodobo dostupných modelov, nájdete na našej webovej stránke. Výňatok z výbavy. Kompletná výbava na vyžiadanie. Husí krk: * Husí krk so zadným zrazením cca 750 mm x 10°. 3 páry upevňovacích ôk (LC 5 000 daN) * Doska z tvrdého dreva cca 30 mm hrubá. Nakladacia plocha s 5 pármi výklopných upevňovacích ôk (LC 5 000 daN) * 3 páry výklopných upevňovacích ôk (LC 10 000 daN) * 1 pár ležiacich upevňovacích ôk vpredu na nakladacej ploche (LC 10 000 daN) * Doska z tvrdého dreva cca 48 mm hrubá, nad nápravami vrúbkovaný plech Podpery sedla: JOST sedlové podpery (manuálne) s dvojrýchlostnou prevodovkou pre zdvíhaciu hmotnosť cca 24 t (skúšobná záťaž cca 50 t) Pneumatiky: * Pneumatiky 205/65 R17.5 – výrobca podľa nášho výberu TPMS: * Systém na kontrolu tlaku v pneumatikách podľa ECE R 141 Nápravy: * BPW nápravy, dve pevné a dve samo-natáčacie nápravy * Vzduchové pruženie s funkciou zdvíhania/spúšťania * Bubnové brzdy * Samonatáčacie nápravy s elektromagnetickou spiatočkovou blokáciou aktivovateľnou spiatočkou alebo manuálne Brzdový systém: * WABCO brzdový systém podľa predpisov EÚ s EBS-E (4S3M) Elektrická výbava: * Elektrická inštalácia podľa predpisov EÚ, LED osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * Všetky LED bočné obrysové svetlá blikajú so smerovkou * ASPÖCK-UNIBOX na prednej spojovacej lište so zásuvkami 24N, 24S & 15-pinový konektor podľa ISO. 24N ISO-1185 24S ISO-3731 15-pinový ISO-12098 Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostných jemnozrnných ocelí * Triedy ocele: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Lak: * HRM metalizácia celého podvozku vozidla s použitím ZINACOR 850 (85 % zinok/15 % hliník) pre najlepšiu antikoróznu ochranu * Farba návesu RAL 3002 karmínová červená * Disky v striebornej sivej * Plachta v RAL 9006 (lesklá priama) Laedpfx Aey Aug Dec Doc Možnosti vrátane: * Na husom krku a na zadnej časti vľavo a vpravo držiak na výstražné tabule vrátane zásuvky * 2-palcový kráľovský čap * Pozinkovaná oceľová čelná stena * Na pozinkovanej prednej spojovacej lište žlto-červené vzduchové spojky * 4 ks zarážky kolies s držiakom na čelnej stene * 3 úrovne drevených lát * Pozinkované sklopné podpery pod zadným sklonom nakladacej plochy * Držiak na výstražný maják na zadnej časti návesu * Výškovo nastaviteľná konštrukcia plachty ~3 960 mm * Pozinkovaná čelná stena s napínacím mechanizmom pre posuvné plachty, výškovo nastaviteľná asi o 400 mm * Strecha značky EDSCHA, posuvná dopredu po ALU strešných profiloch (zadná a predná stena zaskrutkovaná) * Na nakladacej ploche 3 páry posuvných bočníc * Nadstavba vzadu hydraulicky rozšíriteľná na ľavú a pravú stranu o cca 750 mm * Posuvná strecha s výklopným portálovým nosníkom * Posuvná plachta s rezervou 700 mm na dĺžku, s napínacími pásmi v cca 600 mm rozostupoch. Výška hornej hrany nadstavby cca 3 960 mm (pri nakladaní) * Jazda s otvorenou posuvnou strechou nie je povolená, vedie k poškodeniu plachty * Nadstavba vzadu s eloxovanými ALU krídlovými dverami uzavretá * Závesná lišta pre ALU nájazdové rampy na zadnej časti vozidla * Ovládacie ventily pre hydraulické rozširovanie nadstavby umiestnené vpravo na návesovej strane * Biele reflexné pásky podľa predpisov EÚ po bokoch a vzadu červené * Elektro-hydraulická jednotka vzadu pod nakladacou plochou * Blatník na zadnej časti návesu * Európske reflexné tabule (červeno-žlté) na zadnej časti návesu * Ručne

Stav: nový, maximálna hmotnosť nákladu: 58 860 kg, celková hmotnosť: 73 000 kg, konfigurácia náprav: 3 nápravy, celková šírka: 2 540 mm, Výbava: ABS, Náš kompletný vozový park s okamžite a krátkodobo dostupnými vozidlami nájdete na našej webovej stránke. Výpis z výbavy. Kompletnú výbavu poskytneme na požiadanie. Labutí krk: * Labutí krk so skosenými rohmi vpredu cca 45° a so zadným zrezaním cca 750 mm x 10° * 3 páry viazacích ôk (LC 5 000 daN). Podlaha z tvrdého dreva, hrúbka cca 30 mm Nakladacia plocha v vysúvateľnom prevedení: * Nakladacia plocha v vysúvateľnom prevedení so zadným zrezaním cca 500 mm x 8° Ledjy Augwepfx Ac Djac * 8 párov výklopných viazacích ôk na vonkajšej strane (LC 10 000 daN) * 1 pár ležatých viazacích ôk vpredu na nakladacej ploche (LC 10 000 daN) * Výrezy v vonkajšom ráme nakladacej plochy na uchytenie upínacích pásov (LC 2 000 daN) * Podlaha z tvrdého dreva, hrúbka cca 48 mm, nad nápravami podlaha z ryhového plechu Dvojdielne oceľové rampy: * Jeden pár pozinkovaných dvojdielnych oceľových rámp, cca 2 750 + 1 400 x 900 mm, s gumovým povrchom Super Grip * Rampa s hydraulickými sklápateľnými a vysúvateľnými dielmi * Hydraulický zdvih, hydraulicky posuvný * Maximálne zaťaženie na pár: 50 000 kg * V súlade s nariadením 1230/2012/EÚ rampy s dĺžkou menšou ako 300 mm nemusia byť v jazdnej polohe započítané do dĺžky vozidla 16 500 mm Nápravy: * BPW nápravy a podvozok, 1. náprava riadená dopredu, 2. a 3. náprava pevná, 4. a 5. náprava riadená dozadu, vzduchové pruženie so zdvíhacími/spúšťacími funkciami, bubnové brzdy * Riadené zadné nápravy s elektromagnetickou blokáciou cúvania – aktivácia cez spätný chod alebo manuálne * Technická nosnosť nápravy: každá 12 000 kg Pneumatiky: * Pneumatiky 235/75 R 17.5 3PMSF – značka podľa nášho výberu TPMS: * Systém monitoringu tlaku v pneumatikách TPMS podľa ECE R 141. Prenos údajov do ťažného vozidla cez štandardizované rozhranie EBS podľa ISO 11992. Pre správne zobrazenie musí byť ťažné vozidlo schopné prijímať a zobrazovať tieto údaje Podpery návesu: * Mechanical JOST podpery s 2-rýchlostnou prevodovkou, zdvihová nosnosť cca 24 t (skúšobná nosnosť cca 50 t) Brzdový systém: * Wabco brzdový systém podľa predpisov EÚ s EBS-E (4S3M), bez prepojovacích vedení k ťahaču Oceľová konštrukcia: * Oceľová konštrukcia z vysokopevnostnej jemnozrnnej ocele * Oceľové kvality: S355J2+N/S355MC (medza klzu 355 MPa), S690QL/S700MC (medza klzu 690 MPa) Elektroinštalácia: * Elektroinštalácia podľa predpisov EÚ, osvetlenie 24 V ASPÖCK-NORDIK (ASS3) * Všetky LED bočné obrysové svetlá blikanie s ukazovateľom smeru * ASPÖCK-UNIBOX na prednej prípojnej lište so zásuvkami 24N, 24S a 15 pólov. Pripojenie podľa ISO: 24N ISO-1185, 24S ISO-3731, 15 pinov ISO-12098 Lakovanie: * Kompletná oceľová konštrukcia po zváraní automaticky otryskaná tryskacím zariadením * Druhé otryskávanie s korundom pre optimálnu priľnavosť náterového systému * Metalizácia HRM celého podvozku ZINACOR 850 (85% zinok/15% hliník) na zabezpečenie najlepšej antikoróznej ochrany * Finálny vrchný lak 2 vrstvy dvojzložkového náteru, jednoliata farba RAL 3002 karminovo červená podľa RAL systému 841GL * Zadná časť metalizovaná a lakovaná v RAL 9010 (čistá biela) Vrátane nasledovného príslušenstva: * 2” konštrukčný čap (king pin) * Pozinkovaná čelná stena z ocele, výška cca 400 mm * Držiak rezervného kolesa pred čelnou stenou * Na pozinkovanej prípojnej lište vpredu žlto-červené vzduchové spojky * Držiak pre výstražné majáky na zadnej časti prívesu * Pozinkované podpery pod sklonom nakladacej plochy * Gumový povrch Super Grip 2