34M³ Abrollcontainer Mit Hydr. Heckklapp kúpiť použité (9 276)

Stav: nový, maximálna hmotnosť nákladu: 31 630 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 9 250 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon (rear) * 24 V 15-pin as well as additional 12 V 7+4 pin power cables * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated steel sheet as well as a basket-type spare wheel carrier mounted on the right side * Closed single plastic fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Offset crank extended 500 mm forward * Turntable platform extended 520 mm at the front with 45° corners and 3 recessed storage compartments including lid and lockable Bedpfx Aqel Th Evsuedc * Chassis made of high-tensile fine-grained steel * Decking above the turntable platform: 50 mm softwood, deep bed platform: 60 mm softwood * Outer planks on the loading ramps: 50 mm bamboo wood * 4 stake pockets per side (no stakes provided) with simultaneous 2 t lashing capability * Load securing package includes: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, 1 pair each of 13.4 t lashing rings front and rear on the side outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of lashing rings 6.4 t on the side in the excavator arm tray, 8 pairs of galvanized folding outriggers for 3 mtr overall width (not provided at the rear slant) * Widening planks stored in a left-hand side compartment * Excavator arm tray above rear axle up to end of approach slant approx. 2,300 x 740 x 190 mm * Mechanical rear support legs * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded floor height approx. 860 mm (including 860 mm approach slant) * Chassis, turntable, loading ramps, mechanical folding rear support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stav: použitý, pohotovostná hmotnosť: 6 400 kg, maximálna hmotnosť nákladu: 23 600 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2013, dĺžka ložného priestoru: 7 800 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 920 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: žltá, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Umiestnenie vozidla: na ceste / v tranzite, 3 osi, otočný oj, listové odpruženie, ABS (protiblokovací systém), uchytné oká, hydraulické nájazdové rampy, zadná podpera, bočné hliníkové ochranné kryty, dvojmontáž kolies. Nadstavba: 3-nápravový nízkopodlažný príves s hydraulickými nájazdovými rampami, pozinkované rampy, 3x 10t nápravy! Všetky údaje sú bez záruky, pretože vozidlo je na ceste! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a chyby vyhradené! Bdodpfx Aqjy R Ekiousc

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring system with indication in the truck via EBS signal (no installation required on truck side) Bdodpfx Aerwc R Rjqusc * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader bed: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent mounting of container locks * Bolted 400 mm bulkhead made of smooth sheet * Bolted rear stakes * Drop sides with spring lifting assist ----Load securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner 1 x 6.3 t lashing ring * Various holes in the front and end crossmembers for 1.2 t lashing options * Profifix lashing rail in the longitudinal axis, center-mounted, for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grating access ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l/min, up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black * Drop sides painted in RAL 9010 pure white * Painting of the side walls in an RAL color of your choice available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to error and prior sale ----Delivery time: * Immediately available ex works Egtsdorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: Bodpfx Aerwc R Aoqujdc ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External fold-down supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Pre-installation in front of the bulkhead for subsequent fitting of container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side boards with spring lifting assistance ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring each in the front and rear corners * Various holes in the front and rear end crossmembers for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (centered), for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm spacing) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical support legs and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear and flange drawbar eye painted in black * Side boards painted in RAL 9010 pure white * Painting of the side walls in a RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures ----Delivery Time: * Immediately available ex Egestorf

Stav: použitý, maximálna hmotnosť nákladu: 31 820 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/1980, dĺžka ložného priestoru: 9 700 mm, šírka ložného priestoru: 3 000 mm, celková šírka: 2 550 mm, celková výška: 900 mm, Rok výroby: 1980, Výbava: ABS, zdvíhacie čelo, Müller-Mitteltal T4 Low-loader Trailer * SAF axles with drum brakes * Twin tires * Low-bed with extendable loading platform * Hydraulic loading ramps, sliding (2 pieces) * Drivable gooseneck * Additional rear supports * Turntable/stanchion design ----Dimensions & Load Area * Loading area approx. 9,800 mm * Loading width: 2,550 - 3,000 mm * Loading height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg Bdodpfoy Skl Iox Aquec * Tires: 235/75R17.5 ----Vehicle number: 11892----Errors and prior sale excepted----Advertising and various lettering digitally removed. -----We are happy to assist you with all formalities related to the purchase of a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer you the following for a surcharge: ----Trade-in of your old vehicle TÜV/inspection certification Complete export processing Financing brokerage Application for export license plates Vehicle transfers Vehicle registration Vehicle recovery and transport ----Your VTS Team

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight Bdjdpfx Aqjl Thxdsusc * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted as infotool on the trailer, with pressure sensors for total axle load display * 15-pin power socket * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier mounted underneath the chassis, right side ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board - 150 mm - inserted * Rear slope on the fifth wheel platform to the lowbed, approx. 700 mm long * Fifth wheel platform covered with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to 3 m total width, but not at the rear slope (extension planks supplied, stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at the front and rear ----Load Securing (Lash Package): * 2 x 6.3 t lashing rings each on the fifth wheel platform, and 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t swing-out and lowerable lashing rings integrated into the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring in the excavator boom recess at the rear * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Boom Recess: Bedpfxsl Tnvgj Aqusdc * Excavator boom recess from the end of the last rigid axle over the steering axle up to the rear member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically single-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-section valve block for future customer retrofit of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity on truck over 40 l/min up to 120 l/min) ----Loading Dimensions: * Loading area on fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear Bdedpsx Ipbgjfx Aquec * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW ECO axles * Parabolic springs * Mechanical axle equalization at the rear Bedpfx Aqsx Ipb Hsujdc * Lateral underride protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel skirts, each fitted with splash protection * Retroreflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets on each side (no stakes included), each can also be used for lashing * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, hinged and lowerable, loadable in all directions, integrated into the outer frame - in the corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3m total width (not in the rear taper) * Widening planks stowed in the middle of the loading area * Excavator stick rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings at the sides in the excavator stick rest) * Single-section hydraulic loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight 5,900 kg * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. CW 36/2026

Stav: nový, maximálna hmotnosť nákladu: 38 290 kg, celková hmotnosť: 48 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 500 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * TS 3 Profile 30,0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Bdodpfx Aqjpk D I Aouoc * 3 x 11 t BPW Eco Plus axles * Last axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system, and RtR-valve ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * Smartboard operating box mounted on the trailer as an infotool with pressure sensors for overall axle load display * 15-pin electrical socket * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Attachments: * Side underrun protection * Landing legs at front and mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier located underneath the chassis on the right side ----Low Loader Deck: * Fifth wheel platform with front corners chamfered at 45°, and a front toolbox made from galvanized steel sheet (width = 2,480 x height = 500 x length = 665 mm) with folding lid * 400 mm high aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear wall -150 mm- inserted high * Rear slope on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical folding extensions for a total width of 3 m, but not in the rear slope (extension planks supplied with storage on the fifth wheel platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lasi Package): * On the fifth wheel platform: each side 2 x 6.3 t lashing rings and side frame 3 x 5 t lashing rods * On the lowbed platform: each side 2 x 13.4 t lashing rings and 4 x 10 t lashing rings, pivoting and lowerable, integrated into the outer frame * Each side 2 x 6.4 t lashing eyes, plus one lashing ring at the excavator arm rest at the rear * 2 x container locks directly after the drop in the lowbed platform ----Excavator Arm Tray: * Excavator arm tray runs continuously from end of last fixed axle over steering axle to the rear cross-member, with internal reinforcement profile approx. L = 2,450 x W = 770 x D = 270 mm ----Loading Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer upgrade to hydraulic ramp shifting * The outermost plank on the ramp is made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump outputs in the truck from over 40 l/min to 120 l/min) ----Loading Dimensions: * Loading area of fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, and extension consoles are hot-dip galvanized * Axles, landing legs, and air tanks painted in black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the vehicle on offer ----Delivery Time: * Availabl

Stav: nový, maximálna hmotnosť nákladu: 23 830 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 8 460 mm, šírka ložného priestoru: 2 520 mm, Rok výroby: 2026, * T3 Profil 30.0: * EBS braking system Bdedpfx Aqel Th Adjuec * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front and rear * Front axle: closed plastic fenders / Rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for tool box on turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Tow bar with 40 mm eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (no stakes provided) with integrated lashing points * Load securing package (La-Si-Paket) consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of swivel and lowerable UVV lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not included at rear chamfer) * Deck planks for widening stored at center of loading area * Excavator arm storage over rear axle up to end cross member, approx. 2,100 mm length (2 pairs of 6.4 t lashing rings at the sides in the excavator arm compartment) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm run-up slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: použitý, pohotovostná hmotnosť: 8 800 kg, maximálna hmotnosť nákladu: 31 200 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/1996, dĺžka ložného priestoru: 10 000 mm, šírka ložného priestoru: 2 510 mm, výška ložného priestoru: 1 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: červená, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Miesto vozidla: Bovenden, 4 nápravy, otočný záves, listové odpruženie, rozšíriteľný na 3 m, upevňovacie oká, dvojdielne najazdové rampy, hydraulické rampy, zadná podpera, bočná hliníková ochrana, dvojmontáž pneumatík, úložný box. Nadstavba: 4-nápravový nízkoložný príves s hydraulickými dvojdielnymi rampami. Nakladacia výška cca 900 mm. 4x 10t náprava SAF, bubnové brzdy, ťažné oko 40 a 50 mm! Dĺžka horného plošiny cca 2900 mm! Dĺžka dolného plošiny cca 7100 mm! ÚDAJE O PRÍSLUŠENSTVE BEZ ZÁRUKY, zmeny, medzi-predaj a omyly vyhradené! Bdjdpfeywvhrox Aquec

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smard-Board for payload determination * Warning sign kits front & rear * Reflective contour markings on the sides and rear * Removable rear rotating beacon * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side * Front: closed single plastic mudguards * Rear: straight steel mud flaps with spray suppression * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 recessed lockable storage compartments including lids * Chassis made of high-strength fine-grain steel * Decking over turntable platform: 50 mm softwood, and on low-bed platform: 60 mm softwood * Outer planks of the loading ramps made of hardwood Bdedpfxsl Tik Nj Aqujc * Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing option * Lashing package: two 6.4 t lashing eyes front left and right on the main frame of the turntable platform * On the outer frame, two pairs front and rear of 13.4 t lashing rings each, and four pairs per side of 10 t swivel and lowerable lashing rings * Loadable in all directions and integrated in the outer frame * Two pairs of 6.4 t lashing rings on the excavator arm rest, side * 8 pairs of galvanized folding outriggers for 3 m total width (not on rear slope) * Widening planks stored on the left side in a storage compartment * Excavator arm rest above the rear axle to the end of the loading slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height, loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm loading slope) * Flow divider installed * Chassis, turntable, loading ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tank, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without previous registration with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf near the A7

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: Bedol Tphrepfx Aquodc * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stav: použitý, celková hmotnosť: 47 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2004, ďalšia kontrola (TÜV): 08/2026, * Müller Mitteltal TS3 nízkozdvižný náves * Prvá evidencia: 11/2004 * 3 nápravy * Vzduchové odpruženie Bsdpfow Tgkbox Aquodc * Gigant nápravy * Hydraulické dlhé rampy, posuvné a sklopné * Rozšírenia ložnej šírky z 2,50 m na 3,0 m * Dĺžka ložnej plochy: 8,50 m pri ložnej výške 0,85 m * Dĺžka ložnej plochy na krku: 3,40 m pri ložnej výške 1,50 m * Podpery * Pohotovostná hmotnosť: 10 260 kg * Technicky prípustná celková hmotnosť: 47 000 kg * STK platná do: 08/2026 * Technická kontrola platná do: 02/2026

Stav: použitý, pohotovostná hmotnosť: 6 500 kg, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 01/2008, ďalšia kontrola (TÜV): 03/2024, dĺžka ložného priestoru: 8 000 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 910 mm, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17.5, farba: oranžová, najazdené kilometre: 1 001 km, typ prevodu: iný, kabína vodiča: iný, Výbava: ABS, Miesto vozidla: Bovenden, listové pruženie, 3 nápravy, nápravy BPW, otočný čap, ABS (antiblokovací systém), upevňovacie oká, hydraulické rampy, zadné podpery, bočná hliníková ochrana proti podbehnutiu, dvojitá montáž pneumatík, odkladacia schránka Bedpfxeqpgtme Aquodc Nadstavba: Hydraulické rampy, možné rozšíriť na 3 m. BPW nápravy, bubnové brzdy, upevňovacie krúžky na vonkajších stranách. Dĺžka ramien cca 4000 mm! ÚDAJE O PRÍSLUŠENSTVE SÚ BEZ ZÁRUKY, zmeny, predaj počas inzercie a chyby vyhradené!

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swing-out supports at rear of chassis frame * Mechanically adjustable warning sign packages front & rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash guards * Reflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm – black powder-coated – mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (mounted at rear) * Drawbar with 40 mm towing eye, height adjustable via tension spring & turnbuckle * 4 stake pockets per side (stakes not included) with integrated lashing options * Load securing package includes: 2 lashing eyes (6.4 t) at front left & right on main frame of bogie platform * 5 pairs UVV-certified swiveling and retractable lashing rings * Loadable in all directions and recessed into outer frame corners: 13.4 t, otherwise 10 t * 6 pairs mechanical folding outriggers for 3 m overall width (not in rear taper) * Extension planks stored in a compartment under the loading area * Excavator arm rest over rear axle up to rear cross-member, approx. 2,100 mm long (2 pairs 6.4 t lashing rings mounted on excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic ramp sideways shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l/min up to 140 l/min), dual-line hydraulics * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm sloped approach) * Loaded deck height approx. 860 mm +/- 30 mm compensating unit * Chassis, bogie, folding outriggers, drop-down rear supports, and drive-on ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted Bdodpfx Aeq Dyv Iequoc * Available from CW 19/2026

Stav: nový, maximálna hmotnosť nákladu: 23 500 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, Výbava: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down support legs at the rear of the chassis frame * Mechanically adjustable warning panel sets, front & rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized sheet steel splash guards, each with spray protection * Contour marking tape, reflective on the sides and rear * Hinged (hot-dip galvanized) toolbox lid on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12/24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 4 stake pockets each side (stakes not included), also suitable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV-compliant lashing rings, foldable and retractable * Loadable in all directions and recessed into the outer frame corners at 13.4 t, elsewhere 10 t * 6 pairs of mechanical fold-out extensions for a total width of 3 m (not on the tail slope) * Widening boards stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the sides of the excavator arm rest) Bodpfx Aqotplwfouedc * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves, hydraulic lateral ramp displacement * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 ltr up to max. 140 ltr/min), dual-line hydraulics * Loading area above fifth wheel: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm via compensation unit * Chassis, bogie, folding outriggers, drop-down supports at the rear and access ramps hot-dip galvanized * Axles, springs, drawbar, air reservoirs etc. painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 19/2026

Stav: použitý, najazdené kilometre: 329 580 km, výkon: 375 kW (509,86 k), prvá registrácia: 09/2020, typ paliva: nafta, celková hmotnosť: 18 000 kg, konfigurácia náprav: 4x4, rázvor náprav: 3 600 mm, farba: biely, kabína vodiča: spacia kabína, typ prevodu: automatický, emisná trieda: Euro 6, zavesenie: oceľ-vzduch, Rok výroby: 2020, počet sedadiel: 2, Výbava: ABS, hydraulika, klimatizácia, navigačný systém, nezávislé kúrenie, nízka hlučnosť, palubný počítač, systém kontroly trakcie, tempomat, uzávierka diferenciálu, permitted gross weight: 18,000 kg, interior color anthracite, leaf/air suspension, tipper hydraulics: MEILLER axial pump 295/110, retarder, digital tachograph, fifth wheel coupling: JOST JSK 37 C, shunting coupling: ROCKINGER SK5, PTO: ZF PTO switching, side PTO NH/4C without flange f1.14 right side mounted, low noise: noise reduction 80 dB (92/97EWG), MAN BrakeMatic, traction control ASR, automatic climate control, MAN Media Pack Navigation, auxiliary heater: EBERSPAECHER Airtronic D2, comfort driver's seat, air-sprung driver's seat, driver's armrest, seat heating for driver's seat, headlight range adjustment, radio: MAN Media Truck Advanced, AUX & USB connection: SD card reader, sound system, mobile phone preparation with Bluetooth, multifunction steering wheel, adjustable steering column, driver's lumbar support, electric windows (2x), fog lights, electric and heated exterior mirrors, electric and heated kerb mirror (right), electric and heated wide-angle mirror, immobilizer, central locking, tinted glass: side windows tinted from B-pillar, rear axle differential lock, CB radio: antenna on cab roof, sun visor, refrigerator, rotating beacon: yellow, axle load display, work lights: 2, hill start assist: EasyStart, LED daytime running lights, spare wheel holder, 1x15-pin connection socket, manual roof hatch, front cup holder, aluminium trim: brushed, cornering light, carpet floor covering: on engine tunnel, RIO Box, speed limiter: electronic speed limiter 90 km/h, voltage converter, suspended cab, front parabolic springs 8.0 t, rear air suspension 13 t, instrument cluster km/h 'High-Line color', rear axle AP HP-1352, AP axle ratio i 4.00, tipping bridge control in cab, 1-cylinder air compressor 360 cc with energy-saving system, regulated rocker lever brake (EVBec) 3-stage, steel bumper, crossmember for trailer coupling, steel air tank, step area on front fender driver's side, compressed air connection in cab Bdsdoza Ilmspfx Aqusc

Stav: použitý, najazdené kilometre: 422 861 km, výkon: 375 kW (509,86 k), prvá registrácia: 01/2020, typ paliva: nafta, celková hmotnosť: 18 000 kg, konfigurácia náprav: 4x4, rázvor náprav: 3 600 mm, farba: biely, kabína vodiča: spacia kabína, typ prevodu: mechanický, emisná trieda: Euro 6, zavesenie: oceľ-vzduch, Rok výroby: 2019, počet sedadiel: 2, Výbava: ABS, hydraulika, klimatizácia, navigačný systém, nezávislé kúrenie, nízka hlučnosť, palubný počítač, systém kontroly trakcie, tempomat, uzávierka diferenciálu, Farba RAL 9010, prípustná celková hmotnosť: 18 000 kg, zamatové sedadlá, vnútorná farba antracitová, listovo-vzduchové odpruženie, sklápacia hydraulika: MEILLER-axiálne čerpadlo 295/101 pre hydraulický systém, retardér, digitálny tachograf, sedlový záves: JOST JSK 37 C, prídavný pohon: ovládanie pre prídavný pohon ZF, N-pohon NH/1C bez príruby f0,91/1,09 vpravo bočne umiestnený, znížený hluk: hlukové opatrenie 80 dB (92/97EWG), MAN BrakeMatic, asistent brzdenia, elektronický stabilizačný program ESP, regulácia preklzu ASR, automatická klimatizácia, navigačný balík MAN Media Pack, prídavné kúrenie: EBERSPAECHER D4S, komfortné sedadlo vodiča, vzduchom odpružené sedadlo vodiča, lakťová opierka vodiča, xenónové svetlá, čistič svetlometov, automatické jazdné svetlá, regulácia dosvitu, rádio: MAN Media Truck Advanced, AUX & USB prípojka: SD čítačka kariet, zvukový systém, príprava na telefón Bluetooth, asistent udržiavania v jazdnom pruhu, dažďový senzor, multifunkčný volant, nastaviteľný stĺpik riadenia, elektrické okná – 2x, hmlové svetlá, vonkajšie zrkadlá elektrické a vyhrievané, zrkadlo na obrubník elektrické a vyhrievané: vpravo, širokouhlé zrkadlo elektrické a vyhrievané, imobilizér, centrálny zamykací systém s diaľkovým ovládaním, tónované sklá: bočné okná od B-stĺpika, zadná uzávierka diferenciálu, CB anténa na streche kabíny, aero paket, pracovné svetlá: 2, LED denné svietenie, držiak rezervného kolesa, konektor 1x15 pinový, manuálne výklopná strecha, držiak na nápoje vpredu, balík bezpečnosti svetla & výhľadu, dekoratívne vložky hliník: brúsený, prisvecovanie do zákruty, kobercový poťah na motorovom tuneli, RIO Box, svetelný senzor, elektronický obmedzovač rýchlosti 90 km/h, menič napätia, odpružená kabína, predné parabolické listové pružiny 8,0 t, zadné vzduchové pružiny 13 t, farebný prístrojový panel High-Line (km/h), riadiaci systém: Comfort Steering, zadná náprava AP HP-1352, prevod zadnej nápravy i 4,00, ovládanie sklápacej plošiny v kabíne vodiča, 1-valcový vzduchový kompresor 360 ccm s úsporným systémom, riadená brzda kipového ramena (EVBec) 3-stupňová, oceľový nárazník, zásobník stlačeného vzduchu oceľ, pneumatické spojenie. Bdodpeza Iltefx Aqusc

Stav: použitý, Rok výroby: 2026, Roll-off Container, ECO approx. 34m³, Swing Door Bedpfoy U Uldex Aquodc Immediately available from stock at 84427 St. Wolfgang – Subject to prior sale – Internal dimensions: L 6000 x W 2430 x H 2350 mm Floor 4 mm thick made from S235 steel Subframe Construction INP 180 base frame UVV tested according to DIN 30722-1 (15,000 kg) C-Locking: Standard External rollers greaseable and replaceable Walls 3 mm thick made from S235 steel Side walls rounded Top frame square tube, bottom end closed with square tube All-round tarp and net hooks Front Wall Hook height 1570 mm Front screw-on ladder RAL 3002 Carmine Red Special Features Reinforced pickup bracket 60 mm Rear Swing door with Dutch locking system Road lock with over-center latch Paintwork Primed inside and outside Additional acrylic resin paint outside, RAL 7015 Slate Grey Tested according to DGUV 214-017 Suitable for trailers from Pronar, Krampe, Fliegl – Immediately available ex-stock 84427 St. Wolfgang – Subject to prior sale – Payment Terms: 100% prepayment before loading. Ownership remains with us until full payment is received. Our General Terms and Conditions apply. Offer is non-binding and without warranty or guarantee. We are happy to prepare a non-binding quotation for you. Please find our complete product range at decker-containerbau.com

Stav: použitý, najazdené kilometre: 69 463 km, výkon: 330 kW (448,67 k), prvá registrácia: 04/2024, typ paliva: nafta, pohotovostná hmotnosť: 12 540 kg, maximálna hmotnosť nákladu: 13 385 kg, celková hmotnosť: 26 000 kg, konfigurácia náprav: 3 nápravy, rázvor náprav: 6 150 mm, ďalšia kontrola (TÜV): 04/2026, brzdy: retardér, typ prevodu: automatický, emisná trieda: Euro 6, zavesenie: oceľ, Výbava: ABS, klimatizácia, tempomat, uzávierka diferenciálu, | Mercedes Benz Arocs 2545 6x4x4 Hydrodrive hákový nosič kontajnerov | Palfinger Palift T18A 18 000 kg | Automatická prevodovka, klimatizácia | Retardér | Multifunkčný volant, el. ovládanie okien | el. zrkadlá, vyhrievané sedadlo, nezávislé kúrenie | Klima, rádio/CD | Núdzový brzdový asistent, asistent jazdného pruhu, tempomat | Listové odpruženie vpredu aj vzadu | Ťažné zariadenie 40 mm | Rázvor 4800/1350 | Pneumatiky: 1-ná/3-ná náprava: 385/65 R22.5, 2-ná náprava: 315/80 R22.5 | Rakúske vozidlo | Platná technická kontrola do 04/2026 | Cena za hákový kontajner: 6 000,- netto | Zmena, chybné zadanie a predaj vyhradený Bsdpfx Aeyr Rfgjquodc

Stav: dobrý (použitý), číslo stroja/vozidla: AB-2025-1723, Rok výroby: 2020, celková hmotnosť: 385 kg, nosnosť: 2 000 kg, dĺžka vidlíc: 1 700 mm, šírka vidlíc: 100 mm, hrúbka vidlice: 45 mm, ťažisko nákladu: 500 mm, maximálna šírka produktu: 980 mm, pracovný rozsah: 860 mm, Medzipredaj, zmeny a možné chyby vyhradené. Prídavné zariadenie v SÚČASNOM stave (rozsah otvárania: 360 až 860 mm (M-M)). Bdjdpfx Asw Azi Soquoc

Stav: použitý, najazdené kilometre: 618 517 km, výkon: 375 kW (509,86 k), prvá registrácia: 02/2018, typ paliva: nafta, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, ďalšia kontrola (TÜV): 01/2027, farba: modrá, typ prevodu: automatický, emisná trieda: Euro 6, Výbava: ABS, klimatizácia, navigačný systém, nezávislé kúrenie, sadzový filter, Volvo FH 500 ťahač s hydraulickým čerpadlom 4x2 Odpruženie: listové-vzduchové Rázvor: 3,80 m Výbava: - Motorová brzda - Digitálny tachograf - Vyhrievané sedadlo - 2x lôžko - Chladiaci priestor - Nezávislé kúrenie Bedpfxjy Unurj Aqujdc - Asistent mŕtveho uhla vonkajšieho zrkadla vpravo - Asistent udržiavania v jazdnom pruhu - Núdzový brzdový systém - Pomoc pri rozjazde do kopca - Rádio, multimédiá, navigácia, telefón, USB, AUX - Presklená strešná štrbina - Slnečná clona - Elektrické ovládanie okien - Hydraulické čerpadlo - Kompletný vzduchový spojler Radi vám pomôžeme aj s financovaním/leasingom v spolupráci s našimi partnermi. Všetky informácie sú bez záruky. Vyhradzujeme si právo na zmeny a medziodpredaj.

Stav: použitý, konfigurácia náprav: 3 nápravy, prvá registrácia: 09/2018, celková dĺžka: 11 830 mm, celková šírka: 2 550 mm, celková výška: 3 720 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75R17,5, farba: iný, Rok výroby: 2018, Výbava: ABS, zdvíhacie čelo, = Other options and accessories = - EBS - Hydraulic system - Tail lift = Remarks = Number of axles: 4, Unladen weight: 9,900 kg, Gross weight: 40,000 kg, Chassis type: Full chassis, Chassis material: Steel, Suspension type: Full air suspension, ABS, EBS, Hydraulic system, Body year: 2018, Body material: Steel, Ramps: Hydraulically controlled, Axle type: BPW, Tail lift, Tail lift configuration: Rear flap, Tail lift material: Steel, Tyre recess / Double hydraulic ramps / 40t technical / Galvanized / Extendable = Further information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Gearbox Transmission: Manual gearbox Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Steering; Tyre tread left inner: 10 mm; Tyre tread left outer: 10 mm; Tyre tread right inner: 11 mm; Tyre tread right outer: 10 mm Bdodpoyqp Tmofx Aquec Axle 2: Twin tyres; Tyre tread left inner: 8 mm; Tyre tread left outer: 7 mm; Tyre tread right inner: 7 mm; Tyre tread right outer: 7 mm Axle 3: Twin tyres; Tyre tread left inner: 7 mm; Tyre tread left outer: 7 mm; Tyre tread right inner: 10 mm; Tyre tread right outer: 10 mm Axle 4: Twin tyres; Tyre tread left inner: 7 mm; Tyre tread left outer: 6 mm; Tyre tread right inner: 4 mm; Tyre tread right outer: 6 mm Weights Unladen weight: 9,900 kg Payload: 30,100 kg GVW: 40,000 kg Functional Tail lift: Rear flap Loading floor height: 89 cm Environment Emission standard: Euro 0 Condition General condition: Average Technical condition: Average Optical condition: Average Damages: None = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands of various years and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business conduct • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an enquiry via our website. Ask directly about our European warranty package.