Müller-Mitteltal 18 T. Kombi Abroller Absetzer Tieflader, Luft kúpiť použité (60 074)

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system as well as RtR valve * Pressure gauge for load weight determination (axles separated onto 2 air suspension circuits) Csdpfx Ael Tlhrem Sjrb * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle with plastic quarter mudguards and splash guards * Rear axle with straight galvanized steel skirts and splash guards * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED rotating beacon at rear * 2 LED reversing lights (activated via reverse gear) * Coupling bar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: Left & right in front of the front wall support each 1 x 13.4 t UVV lashing ring, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing rings (13.4 t) hanging at the rear left & right in front of the rear support, on each side 4 pairs of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and integrated into the outer frame, 3 stake pockets on each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding supports for 3 m total width (not in the rear slope) * Board holder for extensions under the chassis on the left side in longitudinal direction * Excavator arm support above rear axle to end support, approx. 2,100 mm long and 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the arm tray * Hardwood flooring on the running surfaces of the low-bed platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks of the loading ramps made from hardwood * Steel construction prepared for 6-way control valves * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Turntable, folding supports, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available ex stock Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange drawbar eye: Crodporwc R Asfx Am Sjb * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal – no installation required on truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Front support winch * Folding external support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted on the front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Preparation in front of the bulkhead for subsequent installation of container locks * 400 mm smooth steel bolted front wall * Bolted rear stanchions * Drop sides with spring assist ----Load securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings at 600 mm intervals * In each front and rear corner: 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail centered longitudinally for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in trailer (for hydraulic pump output in truck from over 40 ltr. / min. up to max. 140 ltr. / min.) ----Paintwork: * Chassis, drawbar, front wall, mechanical drop supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted black * Sideboard paintwork in RAL 9010 pure white * Painting of the side walls in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Example images ----Delivery time: * Available approx. from calendar week 16/2026

Stav: použitý, maximálna hmotnosť nákladu: 31 000 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 290 mm, šírka ložného priestoru: 2 520 mm, výška ložného priestoru: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders Cjdpol Tnu Aefx Am Ssrb * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower function and RtR valve * Manometer pressure display for payload determination (axles separated on 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel skirts with spray protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Towing eye (50 mm) with height adjustment * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front structure in front of the bogie platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the bogie platform's steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing eyes left & right in front of front wall support, 4 lateral holes each (2 t lashing force) in bogie platform, 1 pair of lashing eyes (13.4 t) suspended at the rear left & right before rear crossmember, 4 pairs UVV lashing rings (10 t) movable and lowerable, loadable in all directions and embedded in outer frame, 3 stake pockets each side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical folding extensions for 3 m overall width (not at rear slope) * Plank holder for extensions under chassis, left longitudinal direction * Excavator arm support over rear axle to end crossmember approx. 2,100 mm long and 190 mm deep, 2 pairs each side 6.4 t lashing eyes in excavator arm support * Hardwood flooring on running surfaces of low-loader platform * Hydraulically single-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * Outer planks of loading ramps made of hardwood * Steel construction prepared for 6-position control valve * Unladen loading edge approx. 950 mm +/- 20 mm (chassis) * Bogie, folding extensions, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, towing eye assembly painted black-- * Tyres: 235/75 R 17.5 * Vehicle has day registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release system for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm (to a total length of 2,250 mm) * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Accessories: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Lowbed Platform: * 50 mm softwood floor * Preparation in front of front wall for subsequent installation of container locks * Bolted smooth sheet metal headboard * Trapezoidal-profile steel side walls, foldable with drop-side lifting assist * Steel rear wall, can be slid between the ramps (bracket for storage inside in front of the headboard when not in use) * Bolt-on rear stakes Cedpfxjrvvflj Am Sorb ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t recessed lashing brackets every 600 mm * One 6.3 t lashing point in each front and rear corner * Multiple drill holes in the head and end cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating access ramps with spring assembly for one-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach angle at rear approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, headboard, access ramps, and rear wall * Drop-side paint color in RAL 9010 pure white * Side walls can be painted in any RAL color shade at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 10 760 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * ETÜ-TA-R 14.4: ----Brake System: * Drum brakes * Electronic braking system (EBS) Crsdpfx Amjq Dyvve Sob * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally on the front right bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Steel rear wall can be inserted between ramps – storage bracket provided internally in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t drop lashing rings every 600 mm * Each corner front and rear fitted with 1 x 6.3 t lashing ring * Various bore holes in the front and rear beam for 1.2 t lashing options ----Ramps: * Single-section mechanical grating drive-on ramps with spring system for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Drop-side color RAL 9010 pure white * Side walls can be painted in any RAL color at extra cost ----Information: * Reinforced and certified superstructure in accordance with EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis Crjdpfx Aoxf Skpem Seb * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 13 600 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, * RAK 18.0 external roller with reverse tipping function ----Brake System: Csdsx Ipbmepfx Am Sorb * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when brake is uncoupled) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Fittings: * Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side * Closed plastic fenders, front and rear axle * Closed side underrun protection * Rear bolted underrun guard * Storage box for container nets made of galvanized perforated sheet steel approx. 1,000 x 500 x 500 mm * Folding A-sign at rear * Rear impact protection buffer ----Electrics / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pin 24V electrical connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for Container Lengths: * For containers 6,500 mm to 7,000 mm ----Container Running Surface / Tipping Bridge: * External roller guidance via flat steel rails with a clear width of approx. 2,180 mm, including 3 centering blocks per side for container guidance * Two recessed rear roller bearings, integrated with the tipping frame and featuring pneumatic securing to prevent longitudinal slippage, to accept and stop the container rollers * Force-locking locking of roll containers via a pneumatically actuated cross clamping unit installed in the front of the tipping frame, operable from outside (single-side operation) * Chassis frame with internal, rearwards-tipping main frame – single-tube hydraulic tipping system * Tipping angle 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front * Hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking parts (without final coating) * Turntable, air reservoir, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Notes: * For container transport in accordance with DIN 30722 Part 1 * New vehicle, unused, with manufacturer's warranty * Subject to errors and prior sale * Example images (photos may vary due to special equipment) ----Delivery time: * Available from week 24/2026

Stav: nový, maximálna hmotnosť nákladu: 8 410 kg, celková hmotnosť: 11 900 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 420 mm, výška ložného priestoru: 600 mm, Rok výroby: 2025, * KA - TA - R 11.9 ----Braking system: Credpfoxf Skvex Am Sob * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal – without any truck-side installation – * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lamps at the rear – actuated via reverse gear – ----General Attachments: * Mechanical BPW landing gear front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of front wall (left side, facing direction of travel) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipping Body: * Mesh hooks at the central locking locations and 2 pieces at the front wall * Steel pallet – 3-way tipper body with reinforced 600 mm Strong side panels * Continuous upper side walls with internal tube reinforcement – without intermediate stakes – foldable with tailgate spring lifter * Screw-fastened rear posts * Combination steel swing doors, asymmetrically split, opening 270° and lockable (non-folding) with additional pendulum frame for automatic rear door opening during tipping * Locking via galvanized lever lock at rear and central locking * Deactivation function for automatic rear door function when tipping backwards with open swing door * Rear ramp receptacle rails ----Load Securing: * One 5 t lashing ring in each corner and four 3 t lashing rings recessed into the outer frame at each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable stowage compartment integrated into the chassis beneath the loading platform at the rear ----Paintwork: * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear folding supports, and access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air reservoir, and landing gear painted in black shade ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 13 700 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2026, RAK 18.0 external roller with rear tipping function ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when disconnecting the brake) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring and turnbuckle ----General Attachments: * Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axle * Enclosed side underrun protection * Bolt-on rear underrun protection * Storage box for container nets made from galvanized perforated sheet metal approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear impact protection buffers ----Electrics / Lighting: * EBS multi-voltage system for towing vehicles with 12V & 24V electrics * 15-pin 24V power connector * LED lighting system for 12V & 24V * 2 additional LED reversing lights * Tire pressure monitoring system (TPMS) ----Suitable for Container Lengths: * for 6,500 mm to 7,000 mm containers Cedjx Ipa Aopfx Am Sjrb ----Container Running Surface / Tipping Platform: * External roller guide via flat steel track with clear spacing of approx. 2,180 mm, plus 3 centering blocks per side for container alignment * At the rear, 2 recessed roller bearings connected to the tipping frame with pneumatic anti-slip safety device for longitudinal securing of the container rollers * The positive locking of the roll-off containers is achieved by a pneumatically operated transverse clamping device installed at the front of the tipping frame and operable from the outside (one-side operation) * Chassis frame with rearward tiltable main frame – single-cylinder motor-hydraulic tipping system * Tipping angle 42° * Rubber pads between chassis and tipping frame * Container loading from the front; chassis hot-dip galvanized ----Tyres: * Single tyres 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking parts (without top coat) * Fifth wheel, air reservoirs, axles, slewing ring, and drawbar painted in a shade of black * Hot-dip galvanized ----Information: * Suitable for container transport according to DIN 30722 Part 1 * New vehicle without initial registration, includes manufacturer’s warranty * Subject to errors and prior sale * Sample images (actual vehicle images may differ due to optional equipment) ----Delivery Time: * Available from week 24/2026

Stav: nový, maximálna hmotnosť nákladu: 14 650 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2024, * RS-T 18,0 / 018 * Wabco EBS-E (elektronický brzdový systém) * RDÜ monitorovanie tlaku v pneumatikách * Núdzové odistenie pre pružinové brzdové valce * Kotúčové brzdy * Duomatic brzdový spojovací systém * 2 x 10 t SAF nápravy * Vzduchové odpruženie s automatickým spustením pri odpojení brzdy * Ťažná oje dĺžky 2 300 mm s 40 mm ťažným okom a nastavením výšky cez ťažnú pružinu a vreteno * Bočná plastová uzamykateľná náradovňa vpravo, uzavreté plastové blatníky * Bočný uzavretý ochranný nárazník slúžiaci ako reklamná plocha * Podbehová ochrana s 2 nárazovými puframi * Sklopný zadný A-štít na odstraňovanie odpadu * LED zadné svetlá s ochranným krytom * 2 x 7-pólové elektrické zásuvky * Podvozok žiarovo pozinkovaný (bez vzdušníkov, náprav, ťažnej oje atď.) * Dĺžka klznej dráhy približne 6 950 mm * Kontajner je upevnený pomocou pneumatickej 4-násobnej čeľusťovej aretácie * Vpredu sú 2 zasúvateľné dorazy pre kontajnery s 2 ďalšími zasúvacími pozíciami * Nezaťažená výška jazdy cca 1 165 mm * -- Technicky prípustná celková hmotnosť do 20 000 kg -- * Vhodné pre kontajnery dĺžky 5 000 – 7 000 mm * Nové vozidlo s výrobnou zárukou * Chyby a predbežný predaj vyhradené * Ihneď k dispozícii zo skladu Egestorf Crjdpjl Tqkwofx Am Sob

Stav: nový, maximálna hmotnosť nákladu: 14 650 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, Rok výroby: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (elektroniczny system hamulcowy) * RDÜ monitorowanie ciśnienia w oponach * urządzenie awaryjnego zwalniania siłowników sprężynowych * hamulce tarczowe * złącze hamulcowe Duomatic * 2 x 10-tonowe osie SAF * zawieszenie pneumatyczne z automatycznym obniżaniem przy rozłączaniu hamulców * dyszel o długości 2300 mm z oczkiem holowniczym 40 mm oraz regulacją wysokości poprzez sprężynę naciągową i wrzeciono * plastikowa skrzynka narzędziowa po prawej stronie, zamknięte plastikowe błotniki * boczna zabudowa ochronna pełniąca funkcję powierzchni reklamowej * zabezpieczenie przeciwnajazdowe z dwoma odbojnikami * składana tablica A z tyłu do wywozu odpadów * tylne lampy LED ze zintegrowanym daszkiem ochronnym * 2 x 7-pinowe gniazda zasilania * rama podwozia ocynkowana ogniowo (bez zbiorników powietrza, osi, dyszla itp.) * długość toru rolkowego ok. 6.950 mm * kontener rolkowy napinany pneumatycznym, czterostronnym ryglem Crjdpfx Ael Tpy Hom Ssb * z przodu dwa wtykane ograniczniki kontenera z dwiema dodatkowymi pozycjami * wysokość jazdy w stanie niezaładowanym ok. 1.165 mm * --Dopuszczalna masa całkowita technicznie możliwa: 20.000 kg-- * odpowiedni dla długości kontenerów 5.000 ? 7.000 mm * pojazd nowy z gwarancją producenta * zastrzeżenie pomyłek i sprzedaży pośredniej * dostępny od ręki w Egestorf

Stav: nový, maximálna hmotnosť nákladu: 8 770 kg, Rok výroby: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Many Extras Equipment: - 2 spring-assisted lifts for 400 mm high steel side panels - Reinforced and certified body according to EN 12642 XL load securing certificate - 10 UVV lashing brackets integrated into the existing hole grid in the outer frame - Additional wooden floor in clamped design - 235/75R17.5 tyres - 4 BPW axles instead of GIGANT - Platform extension by 870 mm to a total of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg payload capacity Paintwork: - Wheels silver - Chassis/front panel/drawbar/rear panel/stakes/ramps hot-dip galvanized - Axles/springs black - Side panels RAL2011 deep orange We are happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping can be arranged upon request. We always keep a selection of new equipment in stock and demonstration units available. Get in touch with us! We rent out vehicles with or without drivers and machinery. A wide range of used machines and equipment is always available. Subject to technical changes, errors, and prior sale. Crodoxcxmfjpfx Am Sjb

Stav: použitý, maximálna hmotnosť nákladu: 7 950 kg, celková hmotnosť: 11 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2010, ďalšia kontrola (TÜV): 02/2026, dĺžka ložného priestoru: 6 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 900 mm, celková šírka: 2 550 mm, Celková hmotnosť: 11.000 kg Cjdpjx E I Utofx Am Serb Pohotovostná hmotnosť: 3.050 kg Užitočná nosnosť: 7.950 kg Celková dĺžka: 8.100 mm Dĺžka ložnej plochy: celkovo cca 6.000 mm Šírka: 2.550 mm / šírka ložnej plochy cca 2.470 mm Výška nakladania: 900 mm Ďalšie informácie - výškovo nastaviteľné oj - podporná noha - bočnice 400 mm, pružinové - elektrické koleso - nápravy BPW - mrežové rampy, bočne posuvné - lezecké lišty, zadná podpera - veľký upínací balík

Stav: použitý, maximálna hmotnosť nákladu: 10 100 kg, celková hmotnosť: 13 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 03/2001, ďalšia kontrola (TÜV): 11/2025, dĺžka ložného priestoru: 6 000 mm, šírka ložného priestoru: 2 460 mm, výška ložného priestoru: 1 000 mm, celková šírka: 2 550 mm, Celková hmotnosť: 13 500 kg Credpfxew Nu I Ts Am Seb Prázdna hmotnosť: 3 400 kg Užitočné zaťaženie: 10 100 kg Celková dĺžka: 8 100 mm Dĺžka ložnej plochy: 6 000 mm Šírka: celková šírka 2 550 mm / šírka plošiny 2 460 mm Výška nakladania: cca 1 000 mm Ďalšie informácie - Pneumatiky 285/70R19,5 - Bočnice 400 mm, 1x delené

Stav: nový, zavesenie: iný, farba: iný, typ prevodu: iný, kabína vodiča: iný, emisná trieda: žiadny, Vyrovnávací blok pre návesy s nízkou ložnou plochou vrátane kontajnerových zámkov, cena za jeden vyrovnávací blok, -- tlačové chyby, omyly a zmeny vyhradené, ilustračné obrázky --, Viac informácií na: !, More Details: ! Crsdpfxjy H A Rxs Am Sjb

Stav: použitý, pohotovostná hmotnosť: 6 200 kg, maximálna hmotnosť nákladu: 23 800 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 11/2006, zavesenie: oceľ, veľkosť pneumatiky: 235/75R17,5 141/140J, farba: iný, typ prevodu: iný, veľkosť prednej pneumatiky: 235/75R17,5 141/140J, veľkosť zadnej pneumatiky: 235/75R17,5 141/140J, kabína vodiča: iný, emisná trieda: žiadny, Výbava: ABS, pneumatická brzda, Upevňovacie oká, -- Tlačové chyby, omyly a zmeny vyhradené, ilustračné fotografie --, Viac údajov na: !, Viac informácií na: ! Credpfsy Hh Icex Am Ssb

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift/lower function and RtR valve * Smart-Board as infotool * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning signs front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical connectors * Four stake pockets per side, each with dual 2 t lashing points * Load security package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame – in the corners up to 13.4 t, elsewhere up to 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stored in the center of the loading area * Hydraulic one-piece drive-on ramps (approx. 3,000 x 720 mm), adjustable sideways * Excavator arm trough from rear axle to rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings laterally in the excavator arm trough) * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black Codjl Tpwyopfx Am Ssrb * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg GVW * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from approx. CW 32 / 2026 * Sample images

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering function * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on truck side) * 15-pin electrical connector * LED lighting * Front landing gear * Rear foldable support legs (external) * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Front and rear pre-fittings for retrofitting 20" container locks * Bolted flat sheet metal bulkhead * Drop-down side walls made of trapezoidal profiled steel, split 1x in the middle * Slide-in steel rear wall between the ramps, storage holder inside the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm - 4 lashing rings mounted on each side - * In each front and rear corner 1x 6.3 t lashing ring * Profifix lashing rail, centrally along longitudinal axis, with lashing capacity up to LC 3,000 daN * Various drilling options for 1.2 t lashing capability in the front and rear cross members Crodpol Th Dfjfx Am Sob * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, rear tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in a shade of black * Side walls painted in a desired RAL color (no special or metallic paints); color can be changed up to approx. 6 weeks before completion * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 10 500 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 7 000 mm, šírka ložného priestoru: 2 470 mm, výška ložného priestoru: 400 mm, Rok výroby: 2026, * EBS (Electronic Braking System) * Emergency release system for spring-loaded cylinders Codjl Thvxjpfx Am Sjrb * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering function * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tyre pressure monitoring with in-cab display via EBS signal – no additional truck-side installation required * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provision in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, drop-down design, split centrally once * Steel rear wall, can be slid in between the ramps, with bracket for unused storage inside at the front bulkhead * Screw-fastened rear stanchions * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm (with 4 lashing rings mounted per side) * 1 x 6.3 t lashing ring at each front and rear corner * Profifix lashing rail along vehicle longitudinal axis, centre-mounted for securing loads up to LC 3000 daN * Multiple holes in front and rear cross-members for securing loads up to 1.2 t * One-piece mechanical grating ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (retractable to 20 mm height) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanised * Axles, springs, air tanks, flange towing eye and support winch painted in a black tone * Side wall painting available in RAL colour of choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion * -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available from approx. CW 31 / 2026

Stav: nový, maximálna hmotnosť nákladu: 23 700 kg, celková hmotnosť: 30 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension, raising and lowering, with RtR valve * Smart-Board as infotool * Side underrun protection * Swing-out supports at the rear on the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: enclosed plastic mudguards; rear axle: straight galvanized steel mud flaps with spray protection * Reflective conspicuity tape on the sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical plug * Four stake pockets per side, each with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform; 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (excluding rear taper) * Extension planks stored in the center of the load area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Load area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-up slope) * Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized Crjdpfxol Tq Euo Am Seb * Axles, turntable, air tanks etc. painted in black * Tyres 235/75 R 17.5 * Payload approx. 24,000 kg with 30,000 kg gross weight * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 32/2026 * Sample images

Stav: použitý, maximálna hmotnosť nákladu: 13 830 kg, celková hmotnosť: 18 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 08/2020, ďalšia kontrola (TÜV): 11/2026, Výbava: ABS, Nemecké vozidlo od prvého majiteľa nehodové Cedpfey Haz Uox Am Sjrb Bočné steny z hliníka SAF nápravy Bubnové brzdy zachovalý stav prenájom, kúpa, lízing s opciou na kúpu prenájom s plným servisom od 590 eur mesačne bez DPH (ceny prenájmu odstupňované podľa dĺžky zmluvy) všetky informácie na Príklad lízingu s opciou na kúpu: 479 eur mesačne bez DPH pri trvaní 36 mesiacov, jednorazová zálohová platba 5 000 eur bez DPH a záverečná splátka 2 000 eur bez DPH. Všetky ceny sú uvedené bez DPH a podliehajú kladnému posúdeniu bonity.

Stav: nový, maximálna hmotnosť nákladu: 30 080 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Tire pressure monitoring with in-cab display via EBS signal (no truck-side installation required) * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord info tool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on sides and rear * LED beacon (removable) at rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and continuously variable height adjustment * Closed single plastic fenders at front * Straight steel mudflaps at rear, each with spray suppression * Side underrun protection * Front extension ahead of turntable platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (lids open to the rear) * Chassis made of high-strength fine-grain steel * Floor above turntable platform made of 50 mm coniferous wood, in low-bed platform made of 60 mm coniferous wood * Outer planks of the loading ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t at front left and right on main frame of turntable platform, laterally front and rear each 1 pair of 13.4 t lashing rings on outer frame, plus 1 pair per side of 10 t swiveling and lowerable lashing rings, loadable in all directions and recessed in outer frame, screwed-on 5 t lashing rings to outer frames of wheel recesses (2 at each front recess, 1 at each rear), 2 pairs of 6.4 t lashing rings laterally in excavator arm holder * 11 pairs of folding outriggers for 3 m overall width (not in rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for extension planks, made of sheet steel, mounted transversely to the loading platform in front of the first rear axle * Excavator arm holder above the rear axle up to the end of the drive-on slope, approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side, approx. 640 mm wide — front: 340 mm deep, rear: 220 mm deep — with sliding covers (storage for covers at front on turntable platform) for transporting wheel loaders with a wheelbase of 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically deployable ramp tips, approx. 4,650 x 720 mm * Hydraulic sideways ramp adjustment * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm; loaded loading height approx. 890 mm ± 20 mm (incl. 860 mm drive-on slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and loading ramps hot-dip galvanized * Axles, air tanks and drawbar painted black Credpfx Amexmpyde Sjb * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stav: nový, maximálna hmotnosť nákladu: 30 080 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T4 RM 40.0: * Wabco EBS-E (elektronický brzdový systém) * Núdzové uvoľňovacie zariadenie pre pružinové brzdové valce * Monitorovanie tlaku v pneumatikách s možnosťou zobrazenia v kabíne nákladného vozidla cez EBS signál – bez potreby inštalácie na strane nákladného vozidla * Bubnové brzdy * 4 x 11 t Gigant nápravy * Vzduchové odpruženie so zadným manuálnym znížením podvozku * Varovné tabuľové balíky vpredu a vzadu * SmartBord infotool s tlak. senzormi pre zobrazenie celkovej zaťaženosti náprav podľa skupiny * Bočné a zadné reflektujúce kontúrové pásky * Odnímateľné zadné LED výstražné svetlo * 15-pólová elektrická zástrčka * LED koncové svetlá * Priamy ťažný oje s 50 mm okom a plynule nastaviteľnou výškou * Predné kryté plastové jednostranné blatníky * Zadné rovné oceľové blatníky so zásterkami (potlačenie rozstrekovania vody) * Bočná ochrana proti podjazdu * Predĺžený predok podvozku pred točňovou plošinou cca 520 mm s 45° rohmi a 3 odkladacími priestormi vrátane uzamykateľných výklopných viek (otváranie smerom dozadu) * Podvozok z vysokokvalitnej jemnozrnnej ocele * Podlaha nad točňovou plošinou z 50 mm a na nízkoplošinovej časti z 60 mm smrekového dreva * Vonkajšie dosky nájazdových rámp z 50 mm tvrdého dreva * Paket zabezpečenia nákladu: 2 viazacie úchyty 6,4 t vpredu vľavo a vpravo na hlavnom ráme točňovej plošiny, po jednom páre 13,4 t viazacích ok po bokoch vpredu a vzadu na vonkajšom ráme, po jednom páre 10 t sklopných a výškovo nastavitelných viazacích ok po bokoch (vyťažené vo všetkých smeroch a zapustené do vonkajšieho rámu), na ráme blatníkov skrutkované 5 t viazacie oká (pri prednom blatníku vždy 2 ks a pri zadnom 1 ks), 2 páry viazacích ok 6,4 t po bokoch v priestore pre rameno bagra * 11 párov vyklápacích rozšírení pre celkovú šírku 3 m (nie na zadnej šikmine) * Úložný priestor (L = 2 470 x B = 570 x H = 250 mm) na rozširovacie dosky z oceľového plechu naprieč ložnou plochou pred prvou zadnou nápravou * Priestor pre rameno bagra nad zadnou nápravou až po koniec nájazdovej šikminy cca 2 300 x 740 x 190 mm * Na každej strane 2 blatníkové výrezy cca 640 mm široké – predný 340 mm hlboký, zadný 220 mm hlboký – s výsuvným krytom (úložisko krytov vpredu na točňovej plošine) pre prepravu kolesových nakladačov s rázvorom 3 100 – 3 640 mm * Mechanické podpery vzadu * Hydraulické sklápacie rampy s hydraulicky výklopným špicom cca 4 650 x 720 mm * Hydraulicky nastaviteľné postranné rampy * Ložná plocha nad točňou: cca 2 990 x 2 520 mm * Zadná ložná plocha: cca 6 780 x 2 520 mm, nakladacia výška zaťažená cca 890 mm +/- 20 mm (vrátane 860 mm nájazdovej šikminy) * Podvozok, točňa, vyklápacie rozšírenia, zadné podpery a nájazdové rampy žiarovo zinkované * Nápravy, vzduchojem a ťažné oje lakované na čierno * Pneumatiky: 235/75R17.5 * Vozidlo je žiarovo zinkované Credpfxexmpyks Am Sob * Nové vozidlo so zárukou výrobcu * Zmeny a predaj vyhradené * K okamžitému odberu v Egestorfe

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smard-Board for payload determination * Warning sign kits front & rear * Reflective contour markings on the sides and rear * Removable rear rotating beacon * LED lighting * Straight drawbar with 50 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side * Front: closed single plastic mudguards * Rear: straight steel mud flaps with spray suppression * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 recessed lockable storage compartments including lids * Chassis made of high-strength fine-grain steel * Decking over turntable platform: 50 mm softwood, and on low-bed platform: 60 mm softwood * Outer planks of the loading ramps made of hardwood * Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing option Cjdpfel Tik Nex Am Sjrb * Lashing package: two 6.4 t lashing eyes front left and right on the main frame of the turntable platform * On the outer frame, two pairs front and rear of 13.4 t lashing rings each, and four pairs per side of 10 t swivel and lowerable lashing rings * Loadable in all directions and integrated in the outer frame * Two pairs of 6.4 t lashing rings on the excavator arm rest, side * 8 pairs of galvanized folding outriggers for 3 m total width (not on rear slope) * Widening planks stored on the left side in a storage compartment * Excavator arm rest above the rear axle to the end of the loading slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height, loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm loading slope) * Flow divider installed * Chassis, turntable, loading ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tank, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without previous registration with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf near the A7

Stav: nový, maximálna hmotnosť nákladu: 30 740 kg, celková hmotnosť: 40 000 kg, konfigurácia náprav: 3 nápravy, Rok výroby: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering device and RtR valve * Smard board for load weight determination * Warning sign packages front and rear * Side and rear reflective contour tape * Removable rear revolving beacon * LED lighting * Straight drawbar with 50 mm towing eye and infinitely variable height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Front closed single plastic fenders * Rear straight steel mud guards, each with spray protection (spray mist reduction) * Side anti-collision guard * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in lowbed platform of 60 mm softwood * Outer planks of the access ramps made of hardwood * Each side with 4 stake pockets (with simultaneous 2 t lashing possibility, no stakes included) * Lashing package: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On the outside frame: each side front and rear 2 pairs of 13.4 t lashing rings, plus each side 4 pairs of 10 t swinging and lowering lashing rings Crjdjl Tphropfx Am Sob * Loadable from all directions and recessed into the outside frame * 2 pairs of lashing rings 6.4 t on the side in excavator arm holder * 8 pairs of galvanized fold-out outriggers for 3 m overall width (however, not on the tail slope) * Side extension planks stored in a compartment on the left * Excavator arm holder above the rear axle up to the end of the access slope approx. 2,100 x 740 x 190 mm * Mechanical rear support legs * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic side ramp displacement & load-holding valve * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/- 20 mm (including approx. 860 mm access slope) * Flow divider installed * Chassis, turntable, ramps, fold-out outriggers, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires 235/75 R 17.5 * New vehicle, no prior registration, with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7