Ťažké nákladné vozidlo

VOLVO FMX 540 6x2 mit Kran Fassi F545.2.28

Stav: nový, najazdené kilometre: 50 km, výkon: 405 kW (550,65 k), typ paliva: nafta, celková hmotnosť: 26 000 kg, konfigurácia náprav: 3 nápravy, farba: biely, typ prevodu: automatický, Výbava: ABS, klimatizácia, navigačný systém, nezávislé kúrenie, sadzový filter, MX 540 6x2 chassis, CHH-MED, trailing axle hydraulically steered, single tires. Application - For paved roads - Distribution transport Iiedpey D A U Ssfx Aglsa - Predominantly flat topography - Ambient temperature up to +40°C, above +40°C max. 25 h/year - Ambient temperature down to -25°C, below -25°C max. 25 h/year - Center of gravity height (body and load) approx. 0.5 - 1 m above upper edge of frame - Clean roads, max. 10% soiled - Flatbed chassis without preparations - Gross combination weight, technical: 60 t (observe AHK towing capacity!) - Vehicle for special bodyworks - Vehicle for crane installation behind cab - Rear-view mirrors for a body width of 2,600 mm Main Components - New model - Chassis height: MED (medium), please refer to VBI/WIS for exact height measurements - Electronically/hydraulically steered tag axle, single tires - Safety long-distance driver's cab FMX - Wheelbase 3,200 mm - Emissions according to Euro 6 Step E, with SCR, particulate filter, and EGR - Diesel engine 12.8 l, 551 HP/405 kW, 2,652 Nm - Volvo Engine Brake+ (VEB+), braking power 510 HP/375 kW (D13K) - ADR brake compliance - I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single ratio, 13 t axle load, GCW 70 t - AA tires 315/80R22.5 - Drive axle ratio: 3.08 : 1 - Diesel fuel Equipment Packages Driver Comfort Package: - Central locking with remote control on the key - Two armrests on the driver's seat - Air conditioning with automatic temperature control and sun sensor - Vinyl-covered armrests - Roof hatch and emergency exit, manually operable, tinted glass - Info and media package with navigation - Radio reception: AM/FM (analog) - USB port Bodywork: - Fifth wheel plate with sliding mechanism, self-lubricating (Jost JSK type) mounted on subframe - Front support cover with FASSI logo (engraved / smooth steel plate) - Reversing camera fully installed Body Installation: - Execution of all chassis modifications required for crane installation, dismantling and assembly of attached components, exhaust system, tanks, etc. Adjustment of vehicle frame - All chassis and bodywork follows manufacturer guidelines for quality compliance - Complete installation of the in-house designed and manufactured special subframe constructed from high tensile fine-grained steel for crane and body; the subframe is fully welded and bolted to the chassis, ensuring extreme torsional rigidity and optimum stability for crane operations. The subframe design is a unique feature. Manufactured to the highest quality standards and painted to match chassis color. - Mounting/bolting of crane and main outrigger carrier to the subframe. Installation of all hydraulic and electrical connections. Mounting position: front - Flatbed as removable steel/welded construction - Length approx. 330 cm, width approx. 248 cm - Platform structure painted in chassis RAL color - Removable aluminum side panels (Suer make), height 600 mm, anodized design with integral steps, removable Kinngrip stakes - Standard platform floor with 4 mm welded anti-slip steel plate, painted in chassis RAL color - 6 recessed lashing rings, 2,000 daN per side, slotted profile for flexible arrangement - 4 chain lashing points 6,500 daN (2 front, 2 rear) - Heavy-duty headboard consisting of welded frame, welded 4 mm steel plate, and 5 accessory hooks, headboard height...

Stav: nový, najazdené kilometre: 50 km, výkon: 405 kW (550,65 k), typ paliva: nafta, celková hmotnosť: 26 000 kg, konfigurácia náprav: 3 nápravy, farba: biely, typ prevodu: automatický, Výbava: ABS, klimatizácia, navigačný systém, nezávislé kúrenie, sadzový filter, MX 540 6x2 chassis, CHH-MED, trailing axle hydraulically steered, single tires. Application Iiodpfx Agjykxmpolsa - For paved roads - Distribution transport - Predominantly flat topography - Ambient temperature up to +40°C, above +40°C max. 25 h/year - Ambient temperature down to -25°C, below -25°C max. 25 h/year - Center of gravity height (body and load) approx. 0.5 - 1 m above upper edge of frame - Clean roads, max. 10% soiled - Flatbed chassis without preparations - Gross combination weight, technical: 60 t (observe AHK towing capacity!) - Vehicle for special bodyworks - Vehicle for crane installation behind cab - Rear-view mirrors for a body width of 2,600 mm Main Components - New model - Chassis height: MED (medium), please refer to VBI/WIS for exact height measurements - Electronically/hydraulically steered tag axle, single tires - Safety long-distance driver's cab FMX - Wheelbase 3,200 mm - Emissions according to Euro 6 Step E, with SCR, particulate filter, and EGR - Diesel engine 12.8 l, 551 HP/405 kW, 2,652 Nm - Volvo Engine Brake+ (VEB+), braking power 510 HP/375 kW (D13K) - ADR brake compliance - I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single ratio, 13 t axle load, GCW 70 t - AA tires 315/80R22.5 - Drive axle ratio: 3.08 : 1 - Diesel fuel Equipment Packages Driver Comfort Package: - Central locking with remote control on the key - Two armrests on the driver's seat - Air conditioning with automatic temperature control and sun sensor - Vinyl-covered armrests - Roof hatch and emergency exit, manually operable, tinted glass - Info and media package with navigation - Radio reception: AM/FM (analog) - USB port Bodywork: - Fifth wheel plate with sliding mechanism, self-lubricating (Jost JSK type) mounted on subframe - Front support cover with FASSI logo (engraved / smooth steel plate) - Reversing camera fully installed Body Installation: - Execution of all chassis modifications required for crane installation, dismantling and assembly of attached components, exhaust system, tanks, etc. Adjustment of vehicle frame - All chassis and bodywork follows manufacturer guidelines for quality compliance - Complete installation of the in-house designed and manufactured special subframe constructed from high tensile fine-grained steel for crane and body; the subframe is fully welded and bolted to the chassis, ensuring extreme torsional rigidity and optimum stability for crane operations. The subframe design is a unique feature. Manufactured to the highest quality standards and painted to match chassis color. - Mounting/bolting of crane and main outrigger carrier to the subframe. Installation of all hydraulic and electrical connections. Mounting position: front - Flatbed as removable steel/welded construction - Length approx. 330 cm, width approx. 248 cm - Platform structure painted in chassis RAL color - Removable aluminum side panels (Suer make), height 600 mm, anodized design with integral steps, removable Kinngrip stakes - Standard platform floor with 4 mm welded anti-slip steel plate, painted in chassis RAL color - 6 recessed lashing rings, 2,000 daN per side, slotted profile for flexible arrangement - 4 chain lashing points 6,500 daN (2 front, 2 rear) - Heavy-duty headboard consisting of welded frame, welded 4 mm steel plate, and 5 accessory hooks, headboard height...