Teleskopický manipulátor

Manitou MT 625H Comfort 75K ST5 S1

Stav: použitý, Rok výroby: 2023, prevádzkové hodiny: 50 h, nosnosť: 2 500 kg, zdvíhacia výška: 5 850 mm, typ paliva: nafta, stavebná výška: 1 920 mm, výkon: 54 kW (73,42 k), stav pneumatík: 50 percento, veľkosť prednej pneumatiky: 12-16.5, veľkosť zadnej pneumatiky: 12-16.5, pohotovostná hmotnosť: 4 800 kg, celková dĺžka: 3 894 mm, farba: iný, maximálna rýchlosť: 25 km/h, Attachment description: Included: - Road homologation (STVO compliant) - 3rd hydraulic circuit - Beacon light - Front work lights - Rear work lights - Full cab - Heater - Radio - Trailer hitch - Mirrors - 7-pin connector - Air conditioning Special equipment description: Available at extra charge: + Fork carriage with forks + General-purpose bucket, construction debris bucket + and more. Specifications: · Mast: telescopic · Fork carriage width (mm): 1060 · FEM: 2 · Carriage: B · Length to fork carriage (mm): 3894 · Total length (mm): 5094 · Wheelbase (mm): 2300 · Overall width (mm): 1850 · Ground clearance at center (mm): 330 · Cab height (mm): 1920 · Tire manufacturer: Camso · Color: black · Type: pneumatic · Number of wheels: 4 · Rear tires, size: 12-16.5 · Quantity: 2 · Front tires, size: 305/70-16.5 · Quantity: 2 · Engine manufacturer: Kubota · Power (KW): 54.6 · Type: V3307-T · Transmission: hydrostatic transmission · AdBlue: no · Maximum side reach: 3.40 m · Breakout force with bucket: 3427 daN · Tilt angle: 12° · Dump angle: 117° · Turning radius (over wheels): 3.31 m · Operating weight (with forks): 4800 kg · Tire type: pneumatic · Lift: 8 s · Lower: 5.40 s · Extend telescopic boom: 5.60 s · Retract telescopic boom: 4.30 s · Crowd: 3.50 s · Dump: 3.60 s · Number of cylinders / cylinder displacement: 4 - 3331 cm³ · Nominal engine output - Power (kW): 75 Hp / 55.40 kW · Max. torque / engine speed: 265 Nm @ 1400 rpm · Drawbar pull: 3550 daN · Number of gears (forward / reverse): 2 / 2 · Max. travel speed: 24.90 km/h · Parking brake: automatic negative parking brake · Service brake: oil-immersed disc brakes on front axles · Pump type: gear pump · Hydraulic pressure: 235 bar · Engine oil: 11.20 l · Hydraulic oil: 115 l · Fuel tank capacity: 63 l · Noise level in cab (LpA): 76 dB · Ambient noise (LwA): 104 dB · Hand/arm vibration: < 2.50 m/s² · Steered wheels (front / rear): 2 / 2 · Driven wheels (front / rear): 2 / 2 · Safety / Cab approval: Standard EN 15000 / Cab ROPS - FOPS Level 1 · Controls: JSM Nodeydw Dtopfx Agnowb

Stav: použitý, Rok výroby: 2022, prevádzkové hodiny: 55 h, nosnosť: 2 500 kg, zdvíhacia výška: 5 850 mm, typ paliva: nafta, stavebná výška: 1 920 mm, výkon: 54 kW (73,42 k), stav pneumatík: 50 percento, veľkosť prednej pneumatiky: 12-16.5, veľkosť zadnej pneumatiky: 12-16.5, pohotovostná hmotnosť: 4 800 kg, celková dĺžka: 3 900 mm, farba: iný, maximálna rýchlosť: 25 km/h, Description of attachments: Included: ✔ Road traffic licensing (STVO) ✔ 3rd hydraulic valve ✔ Rotating beacon ✔ Front work lights ✔ Rear work lights ✔ Full cab ✔ Heating ✔ Air conditioning ✔ Radio ✔ Trailer hitch ✔ Mirror ✔ Mobile phone holder ✔ Leather seat Description of special equipment: Optional at extra cost: 🔲 Fork carriage with forks 🔲 Earth bucket, debris bucket 🔲 etc. Description: ・Mast: telescopic ・Fork carriage width (mm): 1070 ・FEM: 2 ・Neck: B ・Opening range (inner-inner / outer-outer): 770-1015mm ・Fork length: 1200mm ・Fork width: 125mm ・Fork thickness: 45mm ・Overall length (mm): 5145 ・Wheelbase (mm): 2200 ・Overall width (mm): 1870 ・Ground clearance (center, mm): 270 ・Cab height (mm): 1920 ・Tire manufacturer: Camso ・Color: Black ・Type: Pneumatic ・Number of wheels: 4 ・Rear tires, size: 12-16.5 ・Quantity: 2 ・Front tires, size: 12-16.5 ・Quantity: 2 ・Engine manufacturer: Kubota ・Power (kW): 54.6 ・Type: V3307-T ・AdBlue: No ・Maximum lateral reach: 3.40 m ・Breakout force with bucket: 3427 daN ・Tip angle: 12° ・Dump angle: 117° ・Turning radius (over wheels): 3.31 m ・Own weight (with forks): 4800 kg ・Tires: pneumatic ・Lifting: 8 s ・Lowering: 5.40 s ・Tele extend: 5.60 s ・Tele retract: 4.30 s ・Tilt back: 3.50 s ・Tilt forward: 3.60 s ・Number of cylinders / cylinder capacity: 4 – 3331 cm³ ・Rated engine output (kW): 75 Hp / 55.40 kW ・Max. torque / engine speed: 265 Nm @ 1400 rpm ・Drawbar pull: 3550 daN ・Number of gears (forward / reverse): 2 / 2 ・Max. travel speed: 24.90 km/h ・Parking brake: Automatic negative parking brake ・Service brake: Oil-immersed disc brakes on front axles ・Pump type: Gear pump ・Hydraulic pressure: 235 bar ・Engine oil: 11.20 l ・Hydraulic oil: 115 l ・Fuel tank capacity: 63 l ・Noise level in operator's cab (LpA): 76 dB ・External noise (LwA): 104 dB ・Hand/arm vibration: < 2.50 m/s² ・Steering wheels (front / rear): 2 / 2 ・Drive wheels (front / rear): 2 / 2 ・Safety/certification: Cab approval to EN 15000 / Cab: ROPS - FOPS Level 1 ・Controls: JSM Nwedoydxbyepfx Agneb

Stav: použitý, Rok výroby: 2022, prevádzkové hodiny: 100 h, nosnosť: 2 500 kg, zdvíhacia výška: 5 850 mm, typ paliva: nafta, stavebná výška: 1 920 mm, výkon: 54 kW (73,42 k), stav pneumatík: 50 percento, veľkosť prednej pneumatiky: 305/70-165, veľkosť zadnej pneumatiky: 305/70-165, pohotovostná hmotnosť: 4 800 kg, celková dĺžka: 3 900 mm, farba: iný, Accessory description: Included: ✔ Road traffic approval (STVO) ✔ 3rd hydraulic circuit ✔ Beacon ✔ Front work lights ✔ Rear work lights ✔ Full cab ✔ Heating ✔ Trailer hitch ✔ Mirrors ✔ 7-pin connector Special equipment: Air conditioning Special equipment description: Optional at extra cost: 🟧 Fork carriage with pallet forks 🟧 Bucket, light material bucket 🟧 etc. Description: • Fork length: 1200 mm • Fork width: 125 mm • Fork thickness: 50 mm • Opening range (IT-IT / O-O): 750–1000 mm • Mast: Telescopic • Fork carriage width (mm): 1050 • FEM: 2 • Carrier: B • Overall length (mm): 5145 • Wheelbase (mm): 2200 • Width (mm): 1920 • Ground clearance center (mm): 270 • Cab height (mm): 1920 • Tire manufacturer: Camso • Color: black • Type: pneumatic • Number of wheels: 4 • Rear tires, size: 305/70-16.5 | Quantity: 2 • Front tires, size: 305/70-16.5 | Quantity: 2 • Engine manufacturer: Kubota • Output (kW): 54.6 • Type: V3307-T • Transmission: hydrostatic transmission • AdBlue: no • Maximum lateral reach: 3.40 m • Breakout force with bucket: 3427 daN • Dump angle: 12° • Bucket tilt angle: 117° • Turning radius (over tires): 3.31 m • Operating weight (with forks): 4800 kg • Tires: Pneumatic Nodpfxoydxbtj Agnjwb • Lift time: 8 s • Lowering time: 5.40 s • Telescope extension: 5.60 s • Telescope retraction: 4.30 s • Tilt in: 3.50 s • Dump out: 3.60 s • Number of cylinders / Cylinder displacement: 4 – 3331 cm³ • Rated engine power – Output (kW): 75 hp / 55.40 kW • Max. torque / engine speed: 265 Nm @ 1400 rpm • Tractive effort: 3550 daN • Number of gears (forward / reverse): 2 / 2 • Max. travel speed: 24.90 km/h • Parking brake: Automatic negative parking brake • Service brake: Oil-immersed disc brakes on front axles • Pump type: Gear pump • Hydraulic pressure: 235 bar • Engine oil: 11.20 l • Hydraulic oil: 115 l • Fuel tank capacity: 63 l • Sound level at operator's ear (LpA): 76 dB • Environmental sound (LwA): 104 dB • Hand/arm vibration: < 2.50 m/s² • Steering wheels (front / rear): 2 / 2 • Drive wheels (front / rear): 2 / 2 • Safety / cab certification: Standard EN 15000 / Cab ROPS – FOPS Level 1 • Controls: JSM

Stav: nový, Rok výroby: 2025, Výbava: pohon všetkých kolies, sadzový filter, Manitou MT625 H Comfort 75K ST5 S1 Telescopic Loader 2.5t 6m The MT 625 H telescopic loader is designed for construction site applications on new builds and for renovation work on low-rise buildings. The compact machine, just 1.80 m wide and under 2 m high, easily passes through doorways and can maneuver efficiently on congested job sites. Its 3.30 m turning radius and the 3 available steering modes provide excellent maneuverability. This telehandler is easy to operate, equipped with an ergonomic dashboard and JSM joystick for intuitive handling. The MT 625 H offers a lifting capacity of 2.5 t and a lifting height of 5.85 m. Powered by a 75-hp engine, it reaches a top speed of 25 km/h. Maintenance is simplified thanks to the wide engine hood opening. The 90-liter gear pump enables simultaneous movement of the boom and telescopic arm, resulting in increased productivity. Max. lifting capacity: 2,500 kg Max. lifting height: 5.85 m Max. reach: 3.40 m Breakout force with bucket: 3,427 daN Overall length with fork carriage: 3.83 m Length to front of forks: 3.90 m Overall width: 1.81 m Overall height: 1.92 m Wheelbase: 2.30 m Nsdsxmqt Ejpfx Agnowb Ground clearance: 0.33 m Cabin width: 0.79 m Tilt-up angle: 12° Tilt-down angle: 117° Turning radius (over tires): 3.31 m Weight: 4,800 kg Tyres: SKS532 12-16.5 Engine: Kubota Stage V, Tier 4 Final Engine model: V3307-CR-TE5B Number / displacement of cylinders: 4 - 3,331 cm³ Engine output (HP/kW): 75 HP / 55.40 kW Max. torque / engine speed: 265 Nm @ 1,400 rpm Tractive force: 3,550 daN Transmission type: Hydrostatic Number of gears (forward/reverse): 2 / 2 Max. travel speed: 20 km/h Automatic negative parking brake Parking brake: Oil-immersed multi-disc brakes on front axles Hydraulic pump type: Gear pump Hydraulic flow / pressure: 90 l/min – 235 bar Hydraulic oil: 115 l Fuel tank capacity: 63 l Steering wheels (front/rear): 2 / 2 Drive wheels (front/rear): 2 / 2 Errors and prior sale reserved. Internal vehicle number: R122 WhatsApp support available! For questions about the vehicle or further information, feel free to contact us conveniently via WhatsApp. Whatsapp