Výmenový podvozkový príves

KÖGEL AW 18- 22,5"*SAF Achsen*Neuwertig

Location:
Hertle Spedition
Munninger Str 10
86732 Oettingen

VIN: WK0A0001800293377

Technical Specifications
Axle load: 9,000 kg
Permissible total weight: 18,000 kg
Technically possible total weight: approx. 18,000 kg
Unladen weight (basic equipment): approx. 2,550 kg
Unladen weight (custom vehicle configuration): approx. 2,580 kg
Theoretical payload: approx. 15,420 kg
(A) Wheelbase: approx. 5,040 mm
(D) Overall length: approx. 9,160 mm
(E) Overall width: approx. 2,550 mm
(M) Distance between locking points: approx. 5,853 mm
(H5) Loading height unladen (driving position): approx. 1,255 mm
(H4) Loading height unladen (lowered): approx. 1,190 mm
(H5) Loading height laden (driving position): approx. 1,225 mm
(H6) Loading height laden (raised): at least approx. 1,380 mm
Driving height set to 450 mm.

Suitable for the transport of standardized swap bodies according to EN 284, sizes C715 and C745.
Suitable for the transport of standardized containers according to ISO 668/1496, size 20'.
Due to the positioning of the underrun protection in accordance with EU regulation, rear-flush loading is not possible!

(N2) Stop front to center of lock: approx. 650 and 800 mm
(O2) Distance from center of towing eye to front edge of swap body C745: approx. 1,940 mm
(Y) Towing fork height unladen, horizontal: approx. 905 mm
Towing fork lateral swing range at 3° in operation: approx. +/- 130 mm, max. swing range: approx. +/- 400 mm
(Q) Distance from axle center to towing fork bearing center: approx. 860 mm

Brake system compliant with ECE-R13
Electrical system compliant with ECE-R48

Steel lightweight frame. Standard front stop, foldable and repositionable. Locking via 4 container locks (twist locks), mounted on container beams according to DIN EN 284. Turntable with ball bearing race (diameter approx. 1,300 mm).

Front centering via alignment rollers (Ø approx. 100 mm)
Rear centering via alignment rollers (Ø approx. 100 mm)

Chassis
SAF INTRADISC axles with disc brakes, diameter 430 mm, ET 120. Air suspension with 220 mm travel.

Vehicle Tires
4x 385/65 R 22.5 160J tires (brand at Kögel's discretion)
4 steel rims 22.5 x 11.75, offset 120 mm (ET 120).

Chassis Attachments
Spray suppression system in accordance with Regulation (EU) No. 109/2011 for 2-axle trailers, consisting of 1 pair of quarter-circle mudguards in front of the front axle, 1 pair of quarter-circle mudguards with spray flaps behind the front axle, and 1 pair of half-circle mudguards with spray flaps on the rear axle.
1 wheel chock with holder
Side underrun protection in accordance with ECE-R73.

Drawbar with height adjustment device, type-approved, with towing eye Ø approx. 40 mm according to DIN 74054, [L]
Drawbar length: approx. 2,250 mm. Clearance of the drawbar on the truck must be checked by the operator!
High, rigid rear underrun protection made of steel, compliant with ECE-R58
Minimum underrun protection profile height 120 mm, designed for increased test forces.

Brake / Air Suspension System
Hedpfxox U Raws Abvefb
EBS system 4S/3M (EBS-E-PREMIUM) with stability program, EBS/Iso 7638 connection with connection lines, parking brake as spring-actuated brake.
Air suspension system including 2 lift and lower valves, each with 1 valve effective on front and rear axle. Arrangement between the front and rear axles.
2 non-interchangeable coupling heads at the front, ISO 1728
Air tanks for brake system and air supply made of steel (EN 286-2).

Bumper protection
1 pair of rubber bumpers 200x150x120 mm mounted at end o

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.