Príves na klády

DOLL Kurzholzanhänger A2G-10 Spezialanhänger

DOLL – 2-axle short timber trailer in "bolster design" Type A2G-10L500 (A131)

Technical Data:
Dimensions:
Trailer total length: 8,511 mm (with drawbar length 1,900 mm)
Loading length: 6,611 mm
Front overhang: 760 mm
Rear overhang: 856 mm
Vehicle width: 2,550 mm
Wheelbase: 4,995 mm
Loading height (top edge of frame, loaded): 1,187 mm (with 275/70 R 22.5 tyres)
Total height: max. 4,000 mm
Weights:
Perm. gross weight: 18,000 kg
Axle load (2 x 9t): 18,000 kg (technically 24,000 kg)
Unladen weight approx.: 3,350 kg (without bolsters and stakes)
Payload approx.: 14,650 kg

Standard Equipment:
A2G DOLL – 2-axle short timber trailer in "bolster design" – straight top chord
Robust welded construction with 2 longitudinal beams with a straight top chord.
- Turntable with ball race
oh- 1 wheel chock with holder
- Side underrun protection according to ECE?R 737254461
Rear underrun protection: Aluminum underrun guard in accordance with ECE?R 58
All lighting and registration plate mounts installed protected, according to ECE?R 487227407
Wheel covers: Full plastic mudguards over the wheels, mounted at the front on the turntable and at the rear on the main frame, with DOLL mudflaps behind the axles.
Nedpfx Asxzurhsdvowp

Frame cover:
Continuous aluminum checker plate cover (3/5 mm) bolted between the top chords.

Drawbar GZY27:
Drawbar with silent bush bearings and support leg, type GZY 27

Towing eye:
Diameter: Ø 50 mm (heavy-duty ECE)
Length: 1,900 mm
D-value: 125 kN
Max. front axle load: 10 t
Max. gross weight: 27 t

Connection lines to truck: Routed along the drawbar (air, lights, ABS).
Cable routing: Brake and electrical lines protected along the main frame.
Grapple holder: Angled, reinforced crane grapple bracket at the front.
Splash guards: Continuous rear splash guard, pendulum-mounted, with "DOLL" logo

Chassis / Undercarriage:
Chassis: 2 single axles, brand BPW, 12 t, with drum brakes, both axles with ABS and AGS, including safety chains. Suspension type SL with 2 x 43 mm trailing leaf springs.
Air suspension: Air suspension without lift/lowering function.
Weight display without Smartboard: EBS-E weight display for trailers with air suspension, consisting of 2 pressure sensors to determine axle loads. Axle loads are transmitted via CAN-BUS to the truck for display in the truck cab (truck equipment not included!)
Brake system: Electronically controlled 2-line compressed air brake system (EBS-E). Branded make, load-dependent, including ABS. EBS system fully installed, spring-loaded parking brake, operable via parking release safety valve and from the driver’s cab (truck-side installation not included!).
Air reservoir: Aluminum

Brake connection: 1 dual circuit Duomatic coupling head.

Tyres: Tyres (85.50 kg each): 8 tyres 275/70 R 22.5, brand Continental Hybrid HS3 on steel rims 8.25 x 22.5.

Bolsters / Stakes:
Bolsters: 6 ECCO steel bolster bodies with 2° stake inclination, type Kombi 7 (80.0 kg), with clamp fixing to the main frame, including 1 pair of securing hooks for load safety.
Stakes: ECCO aluminum stakes type ALU 7, bolted, fixed length. Base height 2,550 mm (21.0 kg). Maximum load capacity per stake pair: 7 t.

Electrical Equipment / Lighting:
Lighting system: Conventional trailer wiring to increase quality standards.
- Long service life
- Resistant to moisture and dirt
- Minimal maintenance
- Simple and quick repair in the rare event of service

Electrics:
Lighting 24 volts, according to...

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.