Príves s pracovnou plošinou

MÜLLER-MITTELTAL 14,4 to, Tand - Plateau- Tieflader, hydr. Rampen

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2025, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes Csdpfsrwc R Rjx Ag Tepu ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED lighting system, 12/24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: * Landing gear at the front * External folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision in front of the bulkhead for retrofitting container locks * 400 mm bolted smooth steel bulkhead * Bolted rear stanchions * Drop sides with spring assist ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the bulkhead crossmember and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece hydraulic grid access ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop legs and access ramps hot-dip galvanised * Axles, springs, air tank, front landing gear and flange eye painted black * Drop side panels painted in RAL 9010 pure white * Painting of side panels in other RAL colours available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex works Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2025, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit Cpodpfxsrwc R Ao Ag Teu ----Drawbar / Flange Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal—no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Fold-out external rear supports * Plastic toolbox approx. 858 x 500 x 500 mm, front right side at the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted 400 mm front wall made of smooth sheet metal * Bolted rear stanchions * Side walls with spring-assisted lifting ----Load Securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * In each corner at the front and rear, 1 x 6.3 t lashing point * Various holes in the front and rear cross members for 1.2 t lashing points ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be retracted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, front wall, mechanical drop-down supports, and ramps, hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange eye painted in a black tone * Sideboards painted in RAL 9010 pure white * Painting of the side walls in an RAL color tone available for an extra charge ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stav: nový, maximálna hmotnosť nákladu: 10 800 kg, celková hmotnosť: 14 400 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 6 270 mm, šírka ložného priestoru: 2 470 mm, Rok výroby: 2025, * ETÜ-TA-R 14.4: ----Brake System: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at front * External folding support legs at rear * Plastic toolbox approx. 858 x 500 x 500 mm front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed Platform: * 50 mm softwood flooring * Fixture in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel front wall * Bolted rear stanchions * Drop sides with spring assist ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Fitting of 3 t recessed lashing rings possible every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various bores in the front and end crossmember for 1.2 t lashing points Cedpfexvgrijx Ag Tepu ----Ramps: * One-piece hydraulic grating drive-on ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, front wall, mechanical drop supports and ramps hot-dip galvanized * Axles, springs, air tank, front support winch as well as flange drawbar eye painted in a shade of black * Painting of drop sides in RAL 2011 deep orange * Painting of the side walls in a RAL color shade available at additional cost ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale subject to change ----Delivery Time: * Immediately available from Egestorf