Drviaci závod

WERT Phantom

Stav: použitý, pohotovostná hmotnosť: 10 900 kg, maximálna hmotnosť nákladu: 43 600 kg, celková hmotnosť: 54 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 8 700 mm, šírka ložného priestoru: 2 550 mm, výška ložného priestoru: 855 mm, veľkosť pneumatiky: 245/70 r17.5, farba: sivý, Rok výroby: 2025, prevádzková hmotnosť: 10 900 kg, Výbava: ABS, Gooseneck, rigid, in central tube design: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel flooring with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin Gbedpfx Agji Ai E Re Tjh - Mechanically operated BPW landing gear - 550 mm long, 8° bevel at the rear end of the gooseneck - Front bulkhead including stowage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN on the gooseneck deck - Aluminum drop-in sideboards, 400 mm high, consisting of 2x sideboards (length 3,150 mm) and rear board with stanchions (galvanized) - Rectangular storage box, aluminum, with folding lid and lockable, approx. 400 x 800 mm, centrally mounted - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, left side - Storage box 45’, aluminum, with folding lid and lockable, approx. 400 x 800 mm, right side Load platform, single telescoping: - Enclosed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel tread plate with anti-slip coating - Beveled transition between fixed section and load platform for attaching bridging rails and wheel recesses - Excavator recess including elongated holes for load securing (LC 1,500 daN), approx. 3,850 mm long - Prepared for hydraulic ramp (electric supply fitted) - Beams for extension to 3,000 mm width - Beveled vehicle rear, 8°, 550 mm long - Sled-type design for easy mounting and removal of ramps - Continuous rear mudflap - 1 pair of lashing points LC 10,000 daN centrally on the platform behind the gooseneck - 7 pairs of lashing points LC 10,000 daN on outer frame of the platform - 6 pairs of stake pockets 100 x 50 mm on the outer frame of the platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the platform - 1 pair of stake pocket rails approx. in the middle of the platform - 1 pair of stake pocket rails on the fixed section - 1 pair of stake pocket rails behind the last axle Ramps: - Hydraulic twin-fold ramps, 2,750+1,500x800 mm - Larch timber decking - Operated via remote control (either wired or wireless) - Ramps with quick-change (removal system) Chassis: - BPW ECO Max axle make - 2 ride heights - 4 axles, each 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 rigid axles and 2 friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system make Knorr (in accordance with EU directives with EBS-E) - TIM G2 by Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning boards 423 mm x 423 mm, with 2 marker lights and mounting position for beacon, continuously adjustable up to 3,950 mm - Mounting options on gooseneck and platform (alternatively on ramp, if present) are included - Insertable bulkhead at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic stabilizer legs at vehicle rear for support during loading - 1 pair of additional reversing lights at the rear, activated with reverse gear - Larch wood extension beams (option)

Stav: použitý, najazdené kilometre: 98 831 km, zdvíhacia výška: 66 000 mm, Rok výroby: 2016, prevádzkové hodiny: 1 h, Pohon: koleso Gbedpsut Dyxofx Ag Tjh Prevádzková hmotnosť: 51 600 kg Nosnosť: 70 000 kg Sériové číslo: 060 587 Stav predných pneumatík: 80 Stav zadných pneumatík: 80 Prepravné rozmery (D x Š x V): 12,5x2,55x3,9 Pre viac informácií kontaktujte PFEIFER GROUP.

Stav: dobrý (použitý), Funkcionalita: plne funkčný, typ paliva: nafta, konfigurácia náprav: 4x4, počet sedadiel: 1, prvá registrácia: 11/2024, Rok výroby: 2013, prevádzkové hodiny: 2 000 h, Výbava: pohon všetkých kolies, prípojné zariadenie, Thwaites Dumper Typ: Mach Rok výroby: 2013 Cca 2000 motohodin Nosnosť: 3 tony Otočná korba Gbsdpfx Aer H Df Sjg Teh Predaj len podnikateľom a na export. Predaj podlieha zmene a omylom. Ponúkaná cena je uvedená bez DPH.

Stav: použitý, Rok výroby: 2013, prevádzkové hodiny: 5 776 h, Účel použitia: stavebníctvo Prevádzková hmotnosť: 3 500 kg Gbedpor Idp Aefx Ag Tjh Typ motora: Caterpillar C7 Výkon: 20,4 m³/min Typ kompresora: Skrutkové kompresory Pracovný tlak: 12 bar Pre viac informácií kontaktujte obchodné oddelenie.

Stav: dobrý (použitý), najazdené kilometre: 35 658 km, Rok výroby: 2015, Podvozok / Undercarriage Výrobca: Liebherr Typ: MK 88 Rok výroby: 2015 Najazdené kilometre: 35.658 km Nadstavba / Horná časť stroja Godpowbgh Dsfx Ag Tobh Prevádzkové hodiny žeriava: 10.666 h Nosnosť: 8.000 kg Hlavný výložník: 30 m Maximálny výsuv výložníka: 45 m / 2.200 kg Maximálna výška háku: 59,10 m Extra výbava: kamera pri výložníku, diaľkové ovládanie

Stav: použitý, Rok výroby: 2013, prevádzkové hodiny: 1 750 h, Použitie: stavebníctvo Godpfx Agowxn Tce Tobh Prevádzková hmotnosť: 3 500 kg Značka motora: Caterpillar C 7 Priepustnosť: 20,4 m³/min Pracovný tlak: 12 bar Pre viac informácií kontaktujte naše obchodné oddelenie.

Stav: použitý, maximálna hmotnosť nákladu: 42 500 kg, celková hmotnosť: 60 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 06/2022, with 12 split axles, hydraulically suspended, hydromechanical forced steering, rear chamfer and drive-on ramps STZ-L Gooseneck - robust steel welded construction - designed loading area 3,950 x 2,480 mm incl. chamfer - hydromechanical forced steering (dual-circuit steering) - turntable-mounted fifth wheel plate with replaceable 2 or 3.5 inch kingpin and adjustable steering wedge - kingpin load 24 t - steering radius to the rear 2,600 mm Loading area Gedpfxsw Etd Ts Ag Tjbh - lowered outer panels 4,630 mm, 420 mm deep enabling a loading height of 470 mm or 830 mm with floors installed - extendable by 2,053 mm - incl. aluminium bridging tracks to create a level surface - excavator arm recess at rear axles, 4,900 mm long, 880 mm wide, 480 mm deep - rear chassis length 4,900 mm incl. 500 mm chamfer, loading height 890 mm - one pair of wheel recesses in bottom loading area - hydraulically suspended 3-axle chassis - split Gigant axles with 600 mm stroke Vehicle rear - design: rear chamfer 500 mm - hydraulic rear support Drive-on ramps - 2-piece drive-on ramps, length 2,850 + 1,850 mm, width 800 mm - rubber surface with climbing strip Brake system - two-line full air brake system with diaphragm brake cylinders - automatic load-dependent braking (ALB) - automatic rod plate system (AGS) - parking brake via spring actuators - ABV brake Special equipment Radio remote control for steering and ramp operation Central lubrication system Technical Data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Fifth wheel height loaded: 1,300 mm Loading area Loading area (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Lowered outer panels: 4,630 mm long plus 2,053 mm extension Central girder: 980 mm Excavator arm recess: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st – 3rd axle hydromechanically forced-steered (dual-circuit steering)

Stav: použitý, pohotovostná hmotnosť: 10 730 kg, maximálna hmotnosť nákladu: 38 770 kg, celková hmotnosť: 49 500 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 07/2024, dĺžka ložného priestoru: 9 300 mm, šírka ložného priestoru: 2 540 mm, výška ložného priestoru: 860 mm, zavesenie: vzduch, veľkosť pneumatiky: 235/75 R 17,5 3PMSF, farba: sivý, Rok výroby: 2024, Výbava: ABS, Gooseneck: - Gooseneck with chamfered front corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood floor Extendable Loading Platform: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings - 3 pairs of outward-folding lashing rings - 1 pair of flat-mounted lashing rings at the front of the loading area - Cut-outs in the outer frame of the platform for fastening straps - Approx. 48 mm thick hardwood floor, checkered plate covering over axles Two-part Steel Ramps: - One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lift mechanism, and hydraulically movable - Maximum load per pair: approx. 40,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated automatically by reverse gear and manually - Air suspension with raise and lower valve - Axle tools - 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame provided by a 2-component zinc-rich primer - High-quality single-colour 2-component top coat in MB 7350 Novagrau Gbodpfxovcpago Ag Teh Included Accessories: - One spare wheel with holder in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holder on the bulkhead - Beacon bracket at the rear of the trailer - Receptacle at the rear of the gooseneck for ALU drive-on ramps - Galvanized folding supports under the platform chamfer - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the sides and red at the rear and on the extension, complying with EU regulations - Electro-hydraulic unit at the rear, under the loading platform - On the gooseneck and ramps, one warning sign holder with socket each, left and right - Ramp controls installed on the right-hand side of the trailer - On the gooseneck, removable aluminium side and rear boards, approx. 2,440 x 400 mm - The rear, galvanized stake pockets are removable, superstructure length approx. 2,560 mm - Four extendable warning signs, approx. 423 x 423 mm with position light, each extendable by approx. 400 mm - 3 pairs of WADER container pockets in the deck for 20ft, 30ft or 40ft containers - 6 pairs of stake pockets, approx. 100x50 mm in the outer frame of the platform - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform chamfer - Sand coated, painted anti-slip finish on chequer plates above the kingpin and loading platform - Holder for rotating beacon on warning signs - European reflective plates (Red-Yellow) at rear of trailer - Speed stickers 80 km/h at the rear and on both sides - Load gauge for axle load determination, including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then specified visible areas - Metallized with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot coated

Stav: použitý, Rok výroby: 2001, prevádzkové hodiny: 9 855 h, Účel použitia: Stavebníctvo Prevádzková hmotnosť: 2 850 kg Gbedpfjxk Ulyjx Ag Tsh Značka motora: Mercedes OM 904 LA Prietok: 14,1 m³/min Typ kompresora: Skrutkové kompresory Pracovný tlak: 12 bar Pre ďalšie informácie kontaktujte oddelenie predaja.

Stav: použitý, maximálna hmotnosť nákladu: 23 000 kg, celková hmotnosť: 36 000 kg, konfigurácia náprav: 3 nápravy, prvá registrácia: 04/2025, dĺžka ložného priestoru: 9 200 mm, šírka ložného priestoru: 2 550 mm, celková šírka: 2 550 mm, Rok výroby: 2025, Výbava: ABS, GVN 3GVN29 / EXTRA-WIDE PLATFORM *KOC* LIFT*P ----VEHICLE HISTORY * NEW VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT TECHNICAL DATA AND EQUIPMENT SHEET VEHICLE TYPE: * GVN TRAILER – 3-AXLE EUROPEAN MODEL COMMERCIAL DESIGNATION: * 3GVN29 ----WEIGHT SPECIFICATIONS CURB WEIGHT * 13,000 KG AXLE LOAD DISTRIBUTION 1st AXLE: 3,653 KG 2nd AXLE: 3,653 KG 3rd AXLE: 3,653 KG ACTUAL VEHICLE MASS * 13,000 KG TECHNICALLY PERMISSIBLE MAXIMUM GROSS WEIGHT * 58,000 KG TECHNICALLY PERMISSIBLE MAXIMUM AXLE LOADS 1st AXLE: 12,000 KG 2nd AXLE: 12,000 KG 3rd AXLE: 12,000 KG TECHNICALLY PERMISSIBLE MAXIMUM LOAD ON AXLE GROUPS 1st GROUP: 36,000 KG MAXIMUM GROSS WEIGHT FOR REGISTRATION PURPOSES Gbsdow Dlqiepfx Ag Tsh * 35,500 KG MAXIMUM AXLE LOADS FOR REGISTRATION PURPOSES 1st AXLE: 8,000 KG 2nd AXLE: 8,000 KG 3rd AXLE: 8,000 KG MAXIMUM MASS ON AXLE GROUPS FOR REGISTRATION 1st GROUP: 24,000 KG TECHNICALLY PERMISSIBLE MAXIMUM STATIC MASS ON KINGPIN * 22,000 KG MAIN TECHNICAL DIMENSIONS (COC) * OVERALL LENGTH: 13,050 MM * LOADING AREA LENGTH: 9,200 MM * VEHICLE WIDTH: 2,550 MM * TOTAL HEIGHT: 3,000 MM * PLATFORM HEIGHT: APPROX. 910 MM * NUMBER OF AXLES: 3 * TYRE SIZE: 235/75 R17.5 * SUSPENSION: AIR SUSPENSION * COLOUR: RAL 5011 ----EQUIPMENT LIST EXPANDED GOOSENECK * FIXED GOOSENECK * STEEL FRONT WALL * 2 REMOVABLE STEEL SIDE DOORS * 1 REMOVABLE STEEL REAR FLAP * FRONT STORAGE COMPARTMENT * FRONT STORAGE COMPARTMENT UNDER CRANK * LOADING SURFACE OVER CRANK LOADING PLATFORM * HIGH-STRENGTH S355 STEEL * PLATFORM EDGES CLAD WITH WOOD * PLATFORM SURFACE COVERED WITH STEEL SHEETING * 14 SIDE EXTENSIONS, EACH +230 MM * 14 FORGED STEEL LASHING EYES, 16 TONNES EACH * SLIDING PANEL FOR EXTRA WIDTH * WIDE-LOAD THRESHOLDS * WIDE-LOAD SIGN * ATTACHMENT POINTS * ADDITIONAL SUPPORTS * PRESSURE GAUGE AXLES AND SUSPENSION * 3 AXLES * OSMAN KOC AXLES, BPW COMPATIBLE * STEERED THIRD AXLE * LIFTING FIRST AXLE * TWIN TYRES ON ALL AXLES * FULL AIR SUSPENSION ON ALL AXLES * FIRST AXLE LIFTING WITH DRUM BRAKES BRAKING SYSTEM * WABCO EBS SYSTEM, ELECTROPNEUMATIC, EC STANDARD * AUTOMATIC REVERSE ALIGNMENT OF STEERED AXLE * DRUM BRAKES ON ALL AXLES TYRES AND RIMS * TYRES: 235/75 R17.5 * SPARE TYRE: YES * WHEELS: 12 * MAXIMUM SPEED: 80 KM/H * RIMS: 6.75X17.5, STEEL, SILVER-GREY * SPARE WHEEL AVAILABLE PAINTWORK * 2 COATS OF EPOXY PRIMER, 100 MICRONS EACH * MIN. 100 MICRONS 2K ACRYLIC PAINT * COLOUR: RAL 5011 ELECTRICS AND LIGHTING * 24 VOLT SYSTEM, EC STANDARD * WATERPROOF AND FROSTPROOF CONNECTORS * SIDE AND POSITION LIGHTS * 6 REAR MULTIFUNCTION LIGHTS * 2 REVERSING/WORK LIGHTS * 2 INDICATORS * 2 NUMBER PLATE LIGHTS * 1 BEACON * 2 TRIANGULAR REFLECTORS * REFLECTIVE STRIPS AND E-MARKING * TRAILER LIGHT SYSTEMS * ROTATABLE REAR SPOTLIGHTS RAMP * FIXED MOUNTED HYDRAULIC RAMPS * SIDEWAYS HYDRAULIC SHIFT LEFT/RIGHT * SUPPORT LEGS: 24 TONNES DYNAMIC, 50 TONNES STATIC, OMS * MANUAL RAMP SUPPORTS * ELECTRICAL CONNECTION FOR HYD