Nízkozdvižný prívesFLIEGL
DTS 300 3-Achs Tiefl 6,5 Parabel Feder - 789
Nízkozdvižný príves
FLIEGL
DTS 300 3-Achs Tiefl 6,5 Parabel Feder - 789
pevná cena bez DPH
29 900 €
(35 581 € brutto)
Stav
Nový
Umiestnenie
Wiesmoor 

Zobraziť obrázky
Zobraziť mapu
Základné údaje
Cena a lokalita
pevná cena bez DPH
29 900 €
(35 581 € brutto)
- Umiestnenie predajcu:
- Ilexstr. 41, 26639 Wiesmoor, Nemecko

Volať
Technické detaily
- Maximálna hmotnosť nákladu:
- 17 900 kg
- Celková hmotnosť:
- 24 000 kg
- Konfigurácia náprav:
- 3 nápravy
- Dĺžka ložného priestoru:
- 8 670 mm
- Šírka ložného priestoru:
- 2 500 mm
- Výška ložného priestoru:
- 860 mm
- Celková šírka:
- 2 520 mm
Podrobnosti ponuky
- ID záznamu:
- A192-34-451
- Referenčné č.:
- - 789
- Naposledy aktualizované:
- dňa 10.07.2025
Popis
Total weight: 24,000 kg / 30,000 kg
Unladen weight: 6,100 kg
Payload: 17,900 / 23,900 kg
Overall length: 10,890 mm
Loading length: total 8,670 mm (2,170 mm gooseneck, 6,500 mm loading area)
Width: 2,520 mm
Loading height: 860 mm
Further information:
Plus pre-carriage / staging from storage location 26639 Wiesmoor: €1,280.00 net
Chassis: Low-bed trailer
Steel welded construction
Turntable with heavy-duty ball race ring
Foldable rear supports
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear spray flap (not in combination with forklift holder)
Quarter mudguards in front of 1st axle
Anti-spray flaps behind 2nd and 3rd axle
1 plastic toolbox, w = 600 / h = 425 / d = 460 mm, lockable
Extendable width up to 3,000 mm (not at rear incline)
(Track width of the machines/vehicles to be transported must not exceed the outer frame width of 2,550 mm)
Storage compartment for wooden planks in the center of the loading area
70 mm wooden planks for widening to 3,000 mm
Tie-down points low loader:
1 pair of tie-down recesses in the main beam at the front, integrated into the gooseneck, each 10 t
4 pairs of lashing holes in the outer gooseneck frame, each 5 t (for attaching lashing straps)
7 pairs of lashing mushrooms, integrated at the top and sides of the outer frame, each 10 t
1 at the front at the gooseneck
6 in the low-bed area
First lashing point 250 mm from the front, last one max. 250 mm from the rear; distance between lashing points not greater than 1,100 mm
5 pairs of ring lashing eyes recessed in the outer frame, each 5 t (can be converted to stanchion pockets)
2 pairs of additional folding lashing eyes, each 10 t
1 on the gooseneck (protruding)
1 recessed in the floor behind the last axle
Drawbar coupling for turntable trailer:
Drawbar with certified 40 mm towing eye
Drawbar height adjustment via spring
Axles + suspension:
Pgjdpewm Uyxjfx Ad Aew
Drum brake axles, manufacturer’s choice
"Axle/chassis laser alignment" for reduced tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balance)
Wheels and tires:
235 / 75 R 17.5” - manufacturer’s choice
Steel twin wheels, factory silver
Brake system:
2-line air brake system
Spring-applied parking brake
2 fail-safe coupling heads front, incl. connecting lines to tractor unit
24 V ABS and ALB, with ABS connector front incl. connecting cable
Attention: The trailer may only be towed by tractors that ensure proper ABS function!
Electrical system:
24 V, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin fail-safe plugs at the front incl. connecting cable
1 LED beacon with holder, switchable via parking light (lamp removable)
2 pairs of warning boards, dual LED illuminated and extendable to 3,000 mm
Flooring:
Gooseneck at front with steel/chequer plate covering
Toolbox recessed into the gooseneck ramp
Subsequent area with approx. 70 mm softwood flooring, in wheel arch area steel/chequer plate covering
Rear incline with 70 mm softwood flooring
Low-bed incl. rear incline: 6,500 mm
Loading ramps:
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp securing at the bottom, foldable (prevents lateral displacement, not in combination with hydraulic side-shift)
Wood covered (ramp ends with steel/chequer plate)
With spring-assisted lifting
Operating instructions:
With 10,000 kg axle load an exemption permit is req
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
Unladen weight: 6,100 kg
Payload: 17,900 / 23,900 kg
Overall length: 10,890 mm
Loading length: total 8,670 mm (2,170 mm gooseneck, 6,500 mm loading area)
Width: 2,520 mm
Loading height: 860 mm
Further information:
Plus pre-carriage / staging from storage location 26639 Wiesmoor: €1,280.00 net
Chassis: Low-bed trailer
Steel welded construction
Turntable with heavy-duty ball race ring
Foldable rear supports
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear spray flap (not in combination with forklift holder)
Quarter mudguards in front of 1st axle
Anti-spray flaps behind 2nd and 3rd axle
1 plastic toolbox, w = 600 / h = 425 / d = 460 mm, lockable
Extendable width up to 3,000 mm (not at rear incline)
(Track width of the machines/vehicles to be transported must not exceed the outer frame width of 2,550 mm)
Storage compartment for wooden planks in the center of the loading area
70 mm wooden planks for widening to 3,000 mm
Tie-down points low loader:
1 pair of tie-down recesses in the main beam at the front, integrated into the gooseneck, each 10 t
4 pairs of lashing holes in the outer gooseneck frame, each 5 t (for attaching lashing straps)
7 pairs of lashing mushrooms, integrated at the top and sides of the outer frame, each 10 t
1 at the front at the gooseneck
6 in the low-bed area
First lashing point 250 mm from the front, last one max. 250 mm from the rear; distance between lashing points not greater than 1,100 mm
5 pairs of ring lashing eyes recessed in the outer frame, each 5 t (can be converted to stanchion pockets)
2 pairs of additional folding lashing eyes, each 10 t
1 on the gooseneck (protruding)
1 recessed in the floor behind the last axle
Drawbar coupling for turntable trailer:
Drawbar with certified 40 mm towing eye
Drawbar height adjustment via spring
Axles + suspension:
Pgjdpewm Uyxjfx Ad Aew
Drum brake axles, manufacturer’s choice
"Axle/chassis laser alignment" for reduced tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balance)
Wheels and tires:
235 / 75 R 17.5” - manufacturer’s choice
Steel twin wheels, factory silver
Brake system:
2-line air brake system
Spring-applied parking brake
2 fail-safe coupling heads front, incl. connecting lines to tractor unit
24 V ABS and ALB, with ABS connector front incl. connecting cable
Attention: The trailer may only be towed by tractors that ensure proper ABS function!
Electrical system:
24 V, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin fail-safe plugs at the front incl. connecting cable
1 LED beacon with holder, switchable via parking light (lamp removable)
2 pairs of warning boards, dual LED illuminated and extendable to 3,000 mm
Flooring:
Gooseneck at front with steel/chequer plate covering
Toolbox recessed into the gooseneck ramp
Subsequent area with approx. 70 mm softwood flooring, in wheel arch area steel/chequer plate covering
Rear incline with 70 mm softwood flooring
Low-bed incl. rear incline: 6,500 mm
Loading ramps:
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp securing at the bottom, foldable (prevents lateral displacement, not in combination with hydraulic side-shift)
Wood covered (ramp ends with steel/chequer plate)
With spring-assisted lifting
Operating instructions:
With 10,000 kg axle load an exemption permit is req
Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.
Poskytovateľ
Poznámka: Zaregistrujte sa zadarmo alebo sa prihláste, aby ste získali všetky informácie.
Registrované od: 2023
Odoslať žiadosť
Telefón & Fax
+49 4944 ... inzercie
Váš inzerát bol úspešne odstránený
Došlo k chybe


















