Vymeniť karosériu za skriňovú karosériu

Krone 7,82 BDF Jumbo Glattwandwechselbrücke

Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, 7,82 BDF Krone Smooth-Side Swap Body, used (Multiple units available) The exterior of the swap body, including the roof, is painted in the customer’s color. Standard RAL shade. The subframe and parts of the support legs are not painted, but these are not visible when the body is set down. Stowage height: 1120 mm The swap body is weatherproof and the roller door operates smoothly. External dimensions (approx., mm): Length 7820, Width 2550, Height 2925 Internal dimensions (approx., mm): Length 7700, Width 2480, Height 2700 Door openings (mm): Width 2370, Height 2600 Lashing: Keyhole slots For registration/operation, max. permissible gross weight: 16,000 kg. Intermodal-ready, incl. rail codification according to DIN EN 13044. Rail approval Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high floor assembly incl. floor board; rectangular tube longitudinal beams with cross members and external frame as welded construction with an underslung guide tunnel. 4 container corner castings (20' basis), symmetric overhangs, 4 grab handle strips. 7 pairs of lashing rings on the side rub rail. Floor: Type: BO WST 27 mm thick, waterproof bonded phenolic plywood floor, strength per DIN EN 283; suitable for floor loads up to max. 5,460 kg forklift axle load. Cedpfevv R Ifex Adqshd 2 ventilation openings at the front in the floor (in accordance with GGVS) Box body: Body type: AB WST Internal height: 2700 mm Portal height (clear): 2525 mm Total height: 2,925 mm Corner height: 2,900 mm Closed body Sidewalls made of smooth galvanized steel cassette panels Roof made of trapezoidal profiled steel sheeting, height: 25 mm 2 ventilation grilles on each sidewall # Rub rail and sidewall with cutouts; internal three-sided forklift collision protection approx. 300 mm high Front wall smooth, made from galvanized steel cassette panels Front wall inside with 21 mm phenolic plywood up to 750 mm high, above that a continuous 12 mm phenolic plywood Front wall outside at the top with offset (optimized for curve running) Rear wall as roller door (width, clear: 2370 mm), with DB Train Plus approval, rollers replaceable Flat steel impact protection for roller door guide rail Sidewalls inside fully equipped with keyhole plates 13 steel guide rails recessed left and right for double-deck load bars 13 LM load bars for double-deck loading Horizontal steel impact protection on rear profile, left and right Please note: Actual dimensions and other specific details may vary slightly from the above specifications due to constant product improvements.

Stav: neskontrolované (použité), Funkcionalita: neoverené, farba: biely, 7.82 BDF Krone smooth-wall swap body with portal doors, used (multiple units available) Parking height: 1120 mm Swap body is watertight External dimensions (approx. in mm): Length 7820 Width 2550 Height 2925 Internal dimensions (approx. in mm): Length 7700 Width 2480 Height 2700 Lashing: Keyhole 4 container corner castings based on 20', symmetrical overhangs, 4 grab handle rails Floor: Type: BO WST 27 mm thick waterproof bonded phenolic plywood flooring, strength according to DIN EN 283; rated for floor loads up to max. 5,460 kg forklift axle load Box body: Internal height: approx. 2700 mm Overall height: approx. 2925 mm Corner height: approx. 2900 mm Closed structure Side walls made of smooth, galvanized steel sheet cassettes Roof made of trapezoidal profile steel sheet, build height: 25 mm, 2 ventilation grilles per side wall # Scuff rail and side wall with cut-outs for internal forklift collision protection, 3-sided, approx. 300 mm high Front wall smooth, made of galvanized steel sheet cassettes Front wall inside with 21 mm phenolic plywood, 750 mm high, topped by a continuous 12 mm plywood sheet Front wall outside with offset (optimized for cornering) Codjwbgrpepfx Adqshd Internal side walls fully covered with keyhole plates 13 steel guide rails on each side embedded to accommodate double-deck loading bars LM double-deck loading bars for double-deck loading Steel impact protection horizontally on the rear profile left and right Note: Actual dimensions and other specific details may vary slightly from the above information due to continuous product improvements.