Náves s pohyblivou podlahou

STAS 10.50 "WF 60 FarmStar" 60m³ (Vermietung möglich)

Stav: nový, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 10 636 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 300 mm, objem nakladacieho priestoru: 60 m³, Chassis manufactured using self-supporting ALU (aluminium) construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregate chassis made of ALUMINIUM with a frame height of 140 mm! (max. 39 tonnes). Nsdpfx Ajfakkcjqrolb Axles and Suspension "Disc brakes 22.5": 3 x 9 tonne Jost axle units with DC air suspension, raising and lowering, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with starting aid (without tractor unit equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco Trailerpulse tyre pressure monitoring with ZF rim-mounted sensors. Tyres and Wheels: 6 wheels with tyres size 385/65 R 22.5, manufacturer’s choice. Alcoa aluminium rims DuraBright 11.75x22.5 ET 120. King pin bolted into a 10 mm thick plate. Landing Legs: aluminium drop legs, 2 x 10 t load capacity, for air suspension we use swivel feet. Brake System: according to E.G. standard, two-line brake system, Wabco EBS electronic braking system with RSS (Roll Stability Support), spring-loaded brake system acting on two axles, operated at the rear, aluminium air reservoir system, premium modulator. Electrical System: according to the German Road Traffic Licensing Regulations (StVZO) with 2 LED five-chamber lights (Aspöck Europoint LED) integrated into the aluminium rear panel, 24-volt system with 1x 5-pin and 2x 7-pin socket, with side LED marker lights, 2 separate LED work lights at the rear, 2 LED work lights from the 1st support leg height, 1 internal LED work light at the front left, operated from outside. Body/Tipping Body "Fully welded interior construction": Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn Aluminium tipper body, side walls made of 30 mm thick ALU plank profiles (2-3 mm), fully welded, 600 mm wide, with lower and upper flange, plank profiles fully welded on the inside, floor designed as a moving floor system fitted on 140 mm ALU cross members, floor load approx. 7 t/m², tightly spaced cross members (approx. 350 mm), ALU headboard with 600 mm plank profile 2-3 mm thick, straight design, special slanted ALU corner profiles, smooth straight rear wall with 2 ALU swing doors 50/30 mm thick, 4 vertical locking rods in welded ALU rear frame fitted with Teflon and stainless steel bearings, movable ALU wall hanging on the reinforced ALU upper flange with Kevlar cover for complete emptying, side brush sealing and additional side Kevlar cover, integrated discharge funnel with folding cover plate at rear left, externally operated, viewing window rear left, one sample slide per rear door (total 2), service door front left. Hydraulic system: "Cargo Floor" moving floor system integrated in the floor with hydraulically operated ALU profiles on ALU square tubes with around 670 PE-HD slide shoes, floor thickness approx. 6 mm, hydraulic stroke approx. 200 mm, fixed connections at the headboard, separate possibility for connecting hydraulic lines under the vehicle with fixed connections, pipe size NW 21, fixed connections with size and design yet to be specified, operating pressure 190–240 bar max., aluminium end pieces welded into floor, electric operation rear left with cable remote control in a lockable waterproof box. Accessories: PVC mudguards with rubber mud flaps, aluminium spare wheel holder, side ALU underrun protection, folding type, 1 tool box approx. 800x460x430 mm, plastic, approx.